Sequentially Deposited Active Layer with Bulk-Heterojunction-like Morphology for Efficient Conventional and Inverted All-Polymer Solar Cells

[1]  Changduk Yang,et al.  N-Type Quinoidal Polymers Based on Dipyrrolopyrazinedione for Application in All-Polymer Solar Cells. , 2021, Chemistry.

[2]  Chunhui Duan,et al.  All-polymer solar cells , 2021, Journal of Semiconductors.

[3]  Yuanyuan Hu,et al.  Narrow‐Bandgap Single‐Component Polymer Solar Cells with Approaching 9% Efficiency , 2021, Advanced materials.

[4]  Ailing Tang,et al.  Tricyclic or Pentacyclic D Units: Design of D-π-A-Type Copolymers for High VOC Organic Photovoltaic Cells. , 2021, ACS applied materials & interfaces.

[5]  X. Gu,et al.  High-Performance All-Polymer Solar Cells and Photodetectors Enabled by a High-Mobility n-Type Polymer and Optimized Bulk-Heterojunction Morphology , 2021, Chemistry of Materials.

[6]  A. Jen,et al.  Multi-Selenophene-Containing Narrow Bandgap Polymer Acceptors for All-Polymer Solar Cells with over 15% Efficiency and High Reproducibility. , 2021, Angewandte Chemie.

[7]  Ailing Tang,et al.  Fabrication of High VOC Organic Solar Cells with a Non-Halogenated Solvent and the Effect of Substituted Groups for "Same-A-Strategy" Material Combinations. , 2021, ACS applied materials & interfaces.

[8]  B. Tang,et al.  Flexible Organic Solar Cells: Progress and Challenges , 2021, Small Science.

[9]  Zhongmin Wang,et al.  Cross-Linkable and Alcohol-Soluble Pyridine-Incorporated Polyfluorene Derivative as a Cathode Interface Layer for High-Efficiency and Stable Organic Solar Cells. , 2021, ACS applied materials & interfaces.

[10]  Tao-tao Zhan,et al.  A solution-processed, ultraviolet-irradiation-derived WO3 film as anode interface layer for high-performance non-fullerene organic solar cells , 2021 .

[11]  Weiqi Wang,et al.  High‐Performance All‐Polymer Solar Cells with a Pseudo‐Bilayer Configuration Enabled by a Stepwise Optimization Strategy , 2021, Advanced Functional Materials.

[12]  F. Huang,et al.  15.4% Efficiency all-polymer solar cells , 2021, Science China Chemistry.

[13]  M. Zhang,et al.  The coupling and competition of crystallization and phase separation, correlating thermodynamics and kinetics in OPV morphology and performances , 2021, Nature communications.

[14]  B. Kan,et al.  Recent progress on all‐small molecule organic solar cells using small‐molecule nonfullerene acceptors , 2020 .

[15]  Hui Lin,et al.  Layer‐by‐Layer Solution Processing Method for Organic Solar Cells , 2020 .

[16]  Fujun Zhang,et al.  A Critical Review on Efficient Thick‐Film Organic Solar Cells , 2020 .

[17]  Chunhui Duan,et al.  The new era for organic solar cells: polymer acceptors. , 2020, Science bulletin.

[18]  N. Gasparini,et al.  The Bulk Heterojunction in Organic Photovoltaic, Photodetector, and Photocatalytic Applications , 2020, Advanced materials.

[19]  Ling Hong,et al.  Organic Photovoltaic Cells for Indoor Applications: Opportunities and Challenges. , 2020, ACS applied materials & interfaces.

[20]  Ray P. S. Han,et al.  High‐Performance Nonfullerene Organic Solar Cells with Unusual Inverted Structure , 2020 .

[21]  Chunhui Duan,et al.  The new era for organic solar cells: polymer donors. , 2020, Science bulletin.

[22]  Chunhui Duan,et al.  The new era for organic solar cells: non-fullerene small molecular acceptors. , 2020, Science bulletin.

[23]  L. Meng,et al.  Highly Efficient All‐Small‐Molecule Organic Solar Cells with Appropriate Active Layer Morphology by Side Chain Engineering of Donor Molecules and Thermal Annealing , 2020, Advanced materials.

[24]  L. Meng,et al.  Understanding the Effect of the Third Component PC 71 BM on Nanoscale Morphology and Photovoltaic Properties of Ternary Organic Solar Cells , 2020 .

[25]  Wansun Kim,et al.  Mechanically Robust All-Polymer Solar Cells from Narrow Band Gap Acceptors with Hetero-Bridging Atoms , 2020 .

[26]  Zhongmin Wang,et al.  An Ultraviolet‐Deposited MoO3 Film as Anode Interlayer for High‐Performance Polymer Solar Cells , 2020, Advanced Materials Interfaces.

[27]  H. Zhong,et al.  Achieving Optimal Bulk Heterojunction in All-Polymer Solar Cells by Sequential Processing with Nonorthogonal Solvents. , 2019, ACS applied materials & interfaces.

[28]  C. Brabec,et al.  Surpassing the 10% efficiency milestone for 1-cm2 all-polymer solar cells , 2019, Nature Communications.

[29]  X. Gu,et al.  Aggregation‐Induced Multilength Scaled Morphology Enabling 11.76% Efficiency in All‐Polymer Solar Cells Using Printing Fabrication , 2019, Advanced materials.

[30]  Bryon W. Larson,et al.  Simultaneously Improved Efficiency and Stability in All-Polymer Solar Cells by a P–i–N Architecture , 2019, ACS Energy Letters.

[31]  Bumjoon J. Kim,et al.  Recent Advances, Design Guidelines, and Prospects of All-Polymer Solar Cells. , 2019, Chemical reviews.

[32]  Jianqi Zhang,et al.  Benzotriazole-Based Acceptor and Donors, Coupled with Chlorination, Achieve a High VOC of 1.24 V and an Efficiency of 10.5% in Fullerene-Free Organic Solar Cells , 2019, Chemistry of Materials.

[33]  Zhitian Liu,et al.  Pyran-bridged A-D-A type small molecular acceptors for organic solar cells , 2019, Solar Energy.

[34]  Xiaojing Long,et al.  Improving Active Layer Morphology of All-Polymer Solar Cells by Dissolving the Two Polymers Individually , 2019, Macromolecules.

[35]  Ergang Wang,et al.  Recent Advances in n‐Type Polymers for All‐Polymer Solar Cells , 2019, Advanced materials.

[36]  A. Jen,et al.  Over 12% Efficiency Nonfullerene All‐Small‐Molecule Organic Solar Cells with Sequentially Evolved Multilength Scale Morphologies , 2019, Advanced materials.

[37]  Jiantie Xu,et al.  Conjugated Polymers Based on Thiazole Flanked Naphthalene Diimide for Unipolar n-Type Organic Field-Effect Transistors , 2018, Chemistry of Materials.

[38]  Xiaowei Zhan,et al.  Morphology Control in Organic Solar Cells , 2018 .

[39]  Yongfang Li,et al.  Highly Flexible and Efficient All-Polymer Solar Cells with High-Viscosity Processing Polymer Additive toward Potential of Stretchable Devices. , 2018, Angewandte Chemie.

[40]  C. Brabec,et al.  Morphology Optimization via Side Chain Engineering Enables All-Polymer Solar Cells with Excellent Fill Factor and Stability. , 2018, Journal of the American Chemical Society.

[41]  Zhaojun Li,et al.  Solar Cells: High‐Performance and Stable All‐Polymer Solar Cells Using Donor and Acceptor Polymers with Complementary Absorption (Adv. Energy Mater. 14/2017) , 2017 .

[42]  Fei Huang,et al.  Multi‐Length‐Scale Morphologies Driven by Mixed Additives in Porphyrin‐Based Organic Photovoltaics , 2016, Advanced materials.

[43]  Cheng Wang,et al.  Flexible, highly efficient all-polymer solar cells , 2015, Nature Communications.

[44]  Luping Yu,et al.  Recent Advances in Bulk Heterojunction Polymer Solar Cells. , 2015, Chemical reviews.

[45]  Christopher M. Proctor,et al.  Competitive Absorption and Inefficient Exciton Harvesting: Lessons Learned from Bulk Heterojunction Organic Photovoltaics Utilizing the Polymer Acceptor P(NDI2OD‐T2) , 2014 .

[46]  J. Xiong,et al.  A wide temperature tolerance, solution-processed MoOx interface layer for efficient and stable organic solar cells , 2017 .