Effect of Pressure and Temperature on Phase Transformation and Properties of Titanium Aluminide Obtained through Reaction Synthesis

[1]  R. M. Imamov,et al.  Production of γ-TiAl Sheets with Improved Superplastic Properties by Pack Rolling , 2004 .

[2]  J. Ferreira,et al.  Combustion synthesis of ternary carbide Ti3AlC2 in Ti–Al–C system , 2003 .

[3]  U. Tamburini,et al.  Ignition mechanism in combustion synthesis of Ti–Al and Ti–Ni systems , 2003 .

[4]  H. Suzuki,et al.  Microstructure and environment-dependent fatigue crack propagation properties of Ti-48Al intermetallics , 2002 .

[5]  T. Tetsui.  Effects of high niobium addition on the mechanical properties and high-temperature deformability of gamma TiAl alloy , 2002 .

[6]  S. Gedevanishvili,et al.  Processing of iron aluminides by pressureless sintering through Fe + Al elemental route , 2002 .

[7]  Jiangfei Guo,et al.  Investigation on In-Situ NiAl-Based Composite Fabricated by HPES , 2001 .

[8]  F. Froes,et al.  Formation of a submicrocrystalline structure in TiAl and Ti3Al intermetallics by hot working , 2000 .

[9]  H. Inui,et al.  High-temperature structural intermetallics , 2000 .

[10]  S. Nam.  Improvement of Metallurgical Processing Parameters for EPM TiAl-1.4Mn-2Mo Alloy , 1999 .

[11]  S. Sangal,et al.  On the formation of TiAl3 during reaction between solid Ti and liquid Al , 1997 .

[12]  Byeong-Joo Lee,et al.  Thermodynamic evaluation of the Ti-Al-O ternary system , 1997 .

[13]  H. Sohn,et al.  Determination of the kinetics of TiAl3 formation from fine Ti and Al particles using differential scanning calorimetry , 1994 .

[14]  Renat M. Imayev,et al.  Effects of grain size and grain boundary structure on yield strength of micro- and submicrocrystalline TiAl , 1993 .

[15]  Renat M. Imayev,et al.  Effect of grain size on ductility and anomalous yield strength of micro- and submicrocrystalline TiAl , 1993 .

[16]  C. Liu,et al.  Reactive sintering of Ni3Al under compression , 1993 .

[17]  U. Kattner,et al.  Thermodynamic Assessment and Calculation of the Ti-Al System , 1992, Metallurgical and Materials Transactions A.

[18]  J. Rawers,et al.  Reaction-sintered hot-pressed TiAl , 1992 .

[19]  M. Yamaguchi.  High temperature intermetallics – with particular emphasis on TiAl , 1992 .

[20]  M. Dahms,et al.  Influence of heat treatment on microstructure of Ti-35wt.%Al prepared by elemental powder metallurgy , 1992 .

[21]  S. Semiatin,et al.  Segregation and homogenization of a near-gamma titanium aluminide , 1992 .

[22]  R. Schwarz,et al.  Metastable phases in the Al3X (X = Ti, Zr, and Hf) intermetallic system , 1991 .

[23]  J. Seeger,et al.  Titanium-Aluminides by Hot Isostatic Pressing of Cold Extruded Titanium-Aluminium Powder Mixtures , 1991 .

[24]  Dennis M. Dimiduk,et al.  Progress in the understanding of gamma titanium aluminides , 1991 .

[25]  Shyh-Chin Huang,et al.  Characterization of the effect of vanadium additions to TiAl base alloys , 1991 .

[26]  R. Wagner,et al.  Fracture behaviour of a Ti48.5Al1Mn alloy , 1991 .

[27]  T. Christman,et al.  Processing and consolidation of bulk nanocrystalline titanium-aluminide , 1991 .

[28]  R. N. Wright,et al.  Synthesis of iron aluminides from elemental powders: Reaction mechanisms and densification behavior , 1991 .

[29]  Farghalli A. Mohamed,et al.  Particulate reinforced metal matrix composites — a review , 1991, Journal of Materials Science.

[30]  J. Whittenberger.  Solid state processing for high temperature alloys and composites , 1990 .

[31]  Shyh-Chin Huang,et al.  Characterization of the high-temperature phase fields near stoichiometric γ-TiAl , 1989 .

[32]  A. Westwood.  Materials for advanced studies and devices , 1988 .

[33]  T. Tamura,et al.  Parameters for Ductility Improvement in TiAl , 1988 .

[34]  H. Yi,et al.  A novel technique for producing NiTi shape memory alloy using the thermal explosion mode of combustion synthesis , 1988 .

[35]  R. German.  Liquid Phase Sintering , 1985 .

[36]  H. A. Lipsitt.  Titanium Aluminides - An Overview , 1984 .

[37]  Kazuo Furuya,et al.  Correlation of the microhardness with the tensile properties of neutron irradiated molybdenum , 1981 .

[38]  A. Savitskii.  Some characteristic features of the sintering of binary systems , 1980 .

[39]  I. Lavrinenko,et al.  Densification in liquid phase sintering under pressure in the system tungsten-copper , 1974 .

[40]  W. Kingery,et al.  Effects of Applied Pressure on Densification During Sintering in the Presence of a Liquid Phase , 1963 .

[41]  B. Cullity,et al.  Elements of X-ray diffraction , 1957 .