The mass loading effects of adsorbing and desorbing contaminant molecules on the magnitude and characteristics of frequency fluctuations in a thickness-shear resonator are studied. The study is motivated by the observation that the frequency of a thickness-shear resonator is determined predominantly by such mechanical parameters as the thickness of the resonator, elastic stiffnesses, mass loading of the electrodes, and energy trapping. An equation was derived relating the spectral density of frequency fluctuations to: (1) rates of adsorption and desorption of one species of contaminant molecules; (2) mass per unit area of a monolayer of molecules: (3) frequency constant; (4) thickness of resonator; and (5) number of molecular sites on one resonator surface. The induced phase noises were found to be significant in very-high-frequency resonators and are not simple functions of the percentage of area contaminated. The spectral density of frequency fluctuations was inversely proportional to the fourth power of the thickness if other parameters were held constant. >
[1]
David A. Howe,et al.
Properties of Signal Sources and Measurement Methods
,
1981
.
[2]
R.F. Voss,et al.
1/f (Flicker) Noise: A Brief Review
,
1979,
33rd Annual Symposium on Frequency Control.
[3]
T. Parker.
1/f frequency fluctuations in quartz acoustic resonators
,
1985
.
[4]
V. Kroupa,et al.
The state of the art of flicker frequency noise in BAW and SAW quartz resonators
,
1988,
IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.
[5]
M. Weissman.
1/f noise and other slow, nonexponential kinetics in condensed matter.
,
1988
.
[6]
J. Gagnepain,et al.
Relation Between 1/f Noise and Q-Factor in Quartz Resonators at Room and Low Temperatures, First Theoretical Interpretation
,
1981
.