Average turn-over frequency of O2 electro-reduction for Fe/N/C and Co/N/C catalysts in PEFCs

Abstract This work aims to evaluate the average turn-over frequency of O 2 electro-reduction for the catalytic sites resulting from the heat-treatment of iron- or cobalt-acetate and carbon black in ammonia at high temperature. This task is complex because at least three factors may control the activity of such catalysts: their metal content, nitrogen content and micropore specific area. In this work, the activity was measured for metal contents from 0.005 to 5 wt.%. The time of heat-treatment was tuned to keep the micropore specific area constant. At Fe content ≤0.2 wt.% the activity increases linearly with Fe content, thus enabling the average turn-over frequency of the Fe/N/C site to be determined. At Co content ≤1.0 wt.% the activity increases approximately as the square root of the Co content. Because no linear relation was found, the turn-over frequency of the Co/N/C site could not be determined. For both Fe and Co catalysts, the activity drops dramatically at contents >1 wt.%. This is concurrent with a drop in the micropore specific area of the catalysts.

[1]  J. Riga,et al.  Oxygen reduction in acid media: influence of the activity of CoNPc(1,2) bilayer deposits in relation to their attachment to the carbon black support and role of surface groups as a function of heat treatment , 1994 .

[2]  H. Tributsch,et al.  Thermogravimetry/Mass Spectrometry Investigations on the Formation of Oxygen Reduction Catalysts for PEM Fuel Cells on the Basis of Heat‐Treated Iron Phenanthroline Complexes , 2002 .

[3]  J. V. Veen,et al.  An extended X-ray absorption fine structure study of heat-treated cobalt porphyrin catalysts supported on active carbon , 1988 .

[4]  K. Asami,et al.  Role of iron catalyst in fate of fuel nitrogen during coal pyrolysis , 1996 .

[5]  Patrick Bertrand,et al.  Oxygen reduction catalysts for polymer electrolyte fuel cells from the pyrolysis of FeII acetate adsorbed on 3,4,9,10-perylenetetracarboxylic dianhydride , 1999 .

[6]  Hubert A. Gasteiger,et al.  Oxygen reduction on a high-surface area Pt/Vulcan carbon catalyst: a thin-film rotating ring-disk electrode study , 2001 .

[7]  Lei Zhang,et al.  Temperature and pH Dependence of Oxygen Reduction Catalyzed by Iron Fluoroporphyrin Adsorbed on a Graphite Electrode , 2005 .

[8]  S. Marcotte,et al.  Oxygen Reduction Catalysts for Polymer Electrolyte Fuel Cells from the Pyrolysis of Iron Acetate Adsorbed on Various Carbon Supports , 2003 .

[9]  Jukka Leppälahti,et al.  Catalytic conversion of nitrogen compounds in gasification gas , 1991 .

[10]  Piotr Zelenay,et al.  A class of non-precious metal composite catalysts for fuel cells , 2006, Nature.

[11]  R. Franke,et al.  Influence of metal ions on the electrocatalytic oxygen reduction of carbon materials prepared from pyrolyzed polyacrylonitrile , 1992 .

[12]  D. Guay,et al.  Influence of Nitrogen‐Containing Precursors on the Electrocatalytic Activity of Heat‐Treated Fe ( OH ) 2 on Carbon Black for O 2 Reduction , 1998 .

[13]  H. Gasteiger,et al.  Activity benchmarks and requirements for Pt, Pt-alloy, and non-Pt oxygen reduction catalysts for PEMFCs , 2005 .

[14]  P. Bertrand,et al.  Oxygen reduction in acid media catalysed by heat treated cobalt tetraazaannulene supported on an active charcoal: Correlations between the performances after longevity tests and the active site configuration as seen by XPS and ToF-SIMS , 1997 .

[15]  P. Schaaf.  Laser nitriding of metals , 2002 .

[16]  R. W. Joyner,et al.  Extended X-ray absorption fine structure (EXAFS) study of cobalt–porphyrin catalysts supported on active carbon , 1982 .

[17]  Patrick Bertrand,et al.  O-2 reduction in PEM fuel cells: Activity and active site structural information for catalysts obtained by the pyrolysis at high temperature of Fe precursors , 2000 .

[18]  A. Wokaun,et al.  Oxygen reduction on high surface area Pt-based alloy catalysts in comparison to well defined smooth bulk alloy electrodes , 2002 .

[19]  T. Okada,et al.  Oxygen Reduction Characteristics of Heat‐Treated Catalysts Based on Cobalt‐Porphyrin Ion Complexes , 1998 .

[20]  Ernest Yeager,et al.  Heat-treated polyacrylonitrile-based catalysts for oxygen electroreduction , 1989 .

[21]  S. Tang,et al.  Electrochemical reduction of oxygen : an alternative method to prepare active CoN4 catalysts , 1999 .

[22]  P. Bogdanoff,et al.  Electrocatalysts for oxygen reduction prepared by plasma treatment of carbon-supported cobalt tetramethoxyphenylporphyrin , 2005 .

[23]  O. Contamin,et al.  Dioxygen reduction electrocatalysis in acidic media : effect of peripheral ligand substitution on cobalt tetraphenylporphyrin , 1995 .

[24]  Lei Zhang,et al.  Progress in preparation of non-noble electrocatalysts for PEM fuel cell reactions , 2006 .

[25]  J. Dahn,et al.  Fe-C-N Oxygen Reduction Catalysts Prepared by Combinatorial Sputter Deposition , 2006 .

[26]  M. Shao,et al.  Platinum monolayer on nonnoble metal-noble metal core-shell nanoparticle electrocatalysts for O2 reduction. , 2005, The journal of physical chemistry. B.

[27]  F. Coowar,et al.  Oxygen reduction in an acid medium: electrocatalysis by CoNPc(1,2) impregnated on a carbon black support; effect of loading and heat treatment , 1993 .

[28]  Sanjeev Mukerjee,et al.  Enhanced electrocatalysis of oxygen reduction on platinum alloys in proton exchange membrane fuel cells , 1993 .

[29]  Daniel Guay,et al.  Effect of the Pre-Treatment of Carbon Black Supports on the Activity of Fe-Based Electrocatalysts for the Reduction of Oxygen , 1999 .

[30]  M. Balasubramanian,et al.  Pt submonolayers on metal nanoparticles—novel electrocatalysts for H2 oxidation and O2 reduction , 2003 .

[31]  N. Guillet,et al.  Electroreduction of oxygen on Co-based catalysts: determination of the parameters affecting the two-electron transfer reaction in an acid medium , 2004 .

[32]  V. S. Bagotzky,et al.  Electrocatalysis of the oxygen reduction process on metal chelates in acid electrolyte , 1978 .

[33]  Sebastian Fiechter,et al.  EXAFS, XPS and electrochemical studies on oxygen reduction catalysts obtained by heat treatment of iron phenanthroline complexes supported on high surface area carbon black , 2002 .

[34]  Patrick Bertrand,et al.  Molecular Oxygen Reduction in PEM Fuel Cells: Evidence for the Simultaneous Presence of Two Active Sites in Fe-Based Catalysts , 2002 .

[35]  Frédéric Jaouen,et al.  Heat-treated Fe/N/C catalysts for O2 electroreduction: are active sites hosted in micropores? , 2006, The journal of physical chemistry. B.

[36]  Frédéric Jaouen,et al.  Fe-Based Catalysts for Oxygen Reduction in PEMFCs Importance of the Disordered Phase of the Carbon Support , 2006 .

[37]  K. Oyaizu,et al.  Modifying carbon particles with polypyrrole for adsorption of cobalt ions as electrocatatytic site for oxygen reduction , 2005 .

[38]  Sanjeev Mukerjee,et al.  Role of Structural and Electronic Properties of Pt and Pt Alloys on Electrocatalysis of Oxygen Reduction An In Situ XANES and EXAFS Investigation , 1995 .

[39]  P. Bertrand,et al.  Is nitrogen important in the formulation of Fe-based catalysts for oxygen reduction in solid polymer fuel cells? , 1997 .

[40]  Michel Lefèvre,et al.  Fe-based catalysts for the reduction of oxygen in polymer electrolyte membrane fuel cell conditions: determination of the amount of peroxide released during electroreduction and its influence on the stability of the catalysts , 2003 .

[41]  P. Bertrand,et al.  Molecular oxygen reduction in PEM fuel cell conditions: ToF-SIMS analysis of co-based electrocatalysts. , 2005, The journal of physical chemistry. B.

[42]  B. Popov,et al.  Studies on Co-based catalysts supported on modified carbon substrates for PEMFC cathodes , 2006 .

[43]  Jean-Pol Dodelet,et al.  Oxygen Reduction in PEM Fuel Cell Conditions: Heat-Treated Non-Precious Metal-N4 Macrocycles and Beyond , 2006 .