The energy consumption and environmental impacts of SCR technology in China
暂无分享,去创建一个
Zengying Liang | Xiaoqian Ma | Hai Lin | YuTing Tang | Xiaoqian Ma | Yuting Tang | Hai-Ping Lin | Zengying Liang
[1] Hey-Suk Kim,et al. Numerical study of SNCR application to a full-scale stoker incinerator at Daejon 4th industrial complex , 2004 .
[2] Shien Hui,et al. NOx emission and thermal efficiency of a 300 MWe utility boiler retrofitted by air staging , 2009 .
[3] Peng Jin-hu. An Analysis on Energy Consumption in Sponge Titanium Production and a Suggested New Technology , 2002 .
[4] Xiao Qian Ma,et al. The energy consumption and environmental impacts of a color TV set in China , 2009 .
[5] Jost O.L. Wendt,et al. Hybrid SNCR‐SCR technologies for NOx control: Modeling and experiment , 2001 .
[6] Sarma V. Pisupati,et al. Evaluation of the use of coal volatiles as reburning fuel for NOx reduction , 2007 .
[7] Zhu Fahu. Electric power industry development and environmental protection , 2006 .
[8] Mário Costa,et al. NOx control through reburning using biomass in a laboratory furnace: Effect of particle size , 2009 .
[9] Anthony Paul Roskilly,et al. Application of the Miller cycle to reduce NOx emissions from petrol engines , 2008 .
[10] Martin Denison,et al. Towards comprehensive computational fluid dynamics modeling of pyrolysis furnaces with next generation low-NOx burners using finite-rate chemistry , 2009 .
[11] Ma Xiao-qian. Life cycle assessment on the solar thermal power generation , 2004 .
[12] Gengqiang Pu,et al. Life cycle inventory and energy analysis of cassava-based Fuel ethanol in China , 2008 .
[13] Hans-Jürgen Dr. Klüppel,et al. The Revision of ISO Standards 14040-3 - ISO 14040: Environmental management Life cycle assessment Principles and framework - ISO 14044: Environmental management Life cycle assessment Requirements and guidelines , 2005 .
[14] Steven A. Benson,et al. SCR catalyst performance in flue gases derived from subbituminous and lignite coals , 2005 .
[15] Kefa Cen,et al. Characteristics of sodium compounds on NO reduction at high temperature in NOx control technologies , 2008 .
[16] Walter Klöpffer,et al. The Role of SETAC in the Development of LCA , 2006 .
[17] M. Hauschild,et al. Environmental assessment of products , 1997 .
[18] Wenying Chen,et al. Clean coal technology development in China , 2010 .
[19] Walter Klöpffer,et al. Life cycle assessment , 1997, Environmental science and pollution research international.
[20] Pauli Dernjatin,et al. Reducing the minimum load and NOx emissions for lignite-fired boiler by applying a stable-flame concept , 2003 .
[21] Zhichao Chen,et al. Measurement of gas species, temperatures, char burnout, and wall heat fluxes in a 200-MWe lignite-fired boiler at different loads , 2010 .
[22] Hans-Jürgen Dr. Klüppel,et al. ISO 14041: Environmental management — life cycle assessment — goal and scope definition — inventory analysis , 1998 .
[23] P. Nielsen,et al. Chinese life cycle impact assessment factors. , 2001, Journal of environmental sciences.
[24] Antonello Barresi,et al. Simulation of an industrial-scale process for the SCR of NOx based on the loop reactor concept , 2009 .
[25] M. S. Hegde,et al. Catalysis for NOx abatement , 2009 .
[26] Judith Gurney. BP Statistical Review of World Energy , 1985 .
[27] Derek J. Fray,et al. Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride , 2000, Nature.
[28] Adisa Azapagic,et al. Life cycle Assessment and its Application to Process Selection, Design and Optimisation , 1999 .
[29] S. C. Hill,et al. Modeling of nitrogen oxides formation and destruction in combustion systems , 2000 .
[30] Nobuhiro Misawa,et al. NOx emission from a 71 MWe pressurized fluidized bed combustor , 2002 .
[31] Miroslav Radojevic,et al. Reduction of nitrogen oxides in flue gases , 1998 .
[32] Bas de Leeuw. Life Cycle Management in Developing Countries: State of the Art and Outlook , 2006 .
[33] Ahmed Mostafa Elkady,et al. On the Performance and Operability of GE’s Dry Low NOx Combustors utilizing Exhaust Gas Recirculation for PostCombustion Carbon Capture , 2009 .