Optical properties and thermal stability of pulsed-sputter-deposited AlxOy/Al/AlxOy multilayer absorber coatings

Spectrally selective AlxOy/Al/AlxOy multilayer absorber coatings were deposited on copper (Cu) and molybdenum (Mo) substrates using a pulsed sputtering system. The Al targets were sputtered using asymmetric bipolar-pulsed DC generators in Ar+O2 and Ar plasmas to deposit an AlxOy/Al/AlxOy coating. The compositions and thicknesses of the individual component layers were optimized to achieve high solar absorptance (a ¼ 0.950–0.970) and low thermal emittance (e ¼ 0.05–0.08). The X-ray diffraction data in thin film mode showed an amorphous structure of the AlxOy/Al/AlxOy coating. The X-ray photoelectron spectroscopy data of the AlxOy/Al/AlxOy multilayer absorber indicated that the AlxOy layers present in the coating were non-stoichiometric. The optical constants (n and k) of the multilayer absorber were determined from the spectroscopic ellipsometric data. Drude’s free-electron model was used for generating the theoretical dispersion of optical constants for Al films, while the Tauc–Lorentz model was used for modeling optical properties of the dielectric AlxOy layers. In order to study the thermal stability of the AlxOy/Al/AlxOy coatings, they were subjected to heat treatment (in air and vacuum) at different temperatures and durations. The multilayer absorber deposited on Cu substrates exhibited high solar selectivity (a/e) of 0.901/0.06 even after heat-treatment in air up to 400 1C for 2h. At 450 1C, the solar selectivity decreased significantly on Cu substrates (e.g., a/e ¼ 0.790/0.07). The coatings deposited on Mo substrates were thermally stable up to 800 1C in vacuum with a solar selectivity of 0.934/0.05. The structural stability of the absorber coatings heat treated in air (up to 400 1C) and vacuum (up to 800 1C) was confirmed by micro-Raman spectroscopymeasurements. Studies on the accelerated aging tests suggested that the absorber coatings on Cu were stable in air up to 75 h at 300 1C and the service lifetime of the multilayer absorber was predicted to be more than 25 years. Further, the activation energy for the degradation of the multilayer absorber heat treated for longer durations in air is of the order of 64 kJ/mol.

[1]  C. D. Wagner,et al.  Auger and photoelectron line energy relationships in aluminum–oxygen and silicon–oxygen compounds , 1982 .

[2]  Harish C. Barshilia,et al.  Reactive sputtering of hard nitride coatings using asymmetric-bipolar pulsed DC generator , 2006 .

[3]  H. Barshilia,et al.  TiAlN∕TiAlON∕Si3N4 tandem absorber for high temperature solar selective applications , 2006 .

[4]  B. O. Seraphin,et al.  Solar energy conversion : solid-state physics aspects , 1979 .

[5]  H. D. Bist,et al.  Thin film of aluminum oxide through pulsed laser deposition: a micro-Raman study , 2001 .

[6]  M. Köhl,et al.  Accelerated ageing test procedures for selective absorber coatings including lifetime estimation and comparison with outdoor test results , 1989 .

[7]  H. Barshilia,et al.  Raman spectroscopy studies on the thermal stability of TiN, crN, TiAlN coatings and nanolayered TiN/CrN, TiAlN/CrN multilayer coatings , 2004 .

[8]  H. Craighead,et al.  Metal/insulator composite selective absorbers , 1979 .

[9]  F. Fietzke,et al.  The deposition of hard crystalline Al2O3 layers by means of bipolar pulsed magnetron sputtering , 1996 .

[10]  J. Fierro,et al.  Nature of Copper Active Sites in the Carbon Monoxide Oxidation on CuAl2O4and CuCr2O4Spinel Type Catalysts , 1998 .

[11]  H. Barshilia,et al.  Superhard nanocomposite coatings of TiN/Si3N4 prepared by reactive direct current unbalanced magnetron sputtering , 2006 .

[12]  Harish C. Barshilia,et al.  Structure and optical properties of pulsed sputter deposited CrxOy∕Cr∕Cr2O3 solar selective coatings , 2008 .

[13]  O. S. Heavens,et al.  Optical Properties of Thin Solid Films , 2011 .

[14]  Alex Ignatiev,et al.  Refinement of solar absorbing black chrome microstructure and its relationship to optical degradation mechanisms , 1980 .

[15]  A. Walsh,et al.  Electronic origins of structural distortions in post-transition metal oxides: experimental and theoretical evidence for a revision of the lone pair model. , 2006, Physical review letters.

[16]  H. Arashi.  Pressure-induced phase transformation of HfO2 , 1992 .

[17]  Bo Carlsson,et al.  Qualification test procedure for solar absorber surface durability , 2000 .

[18]  B. Tay,et al.  Oxygen lone-pair states near the valence band edge of aluminum oxide thin films , 2004 .

[19]  G. Jellison,et al.  Parameterization of the optical functions of amorphous materials in the interband region , 1996 .

[20]  David R. Mills,et al.  New cermet film structures with much improved selectivity for solar thermal applications , 1992 .

[21]  M. Köhl,et al.  Accelerated life testing of solar absorber coatings:: Testing procedure and results , 2000 .

[22]  Shen Yue,et al.  High-temperature optical properties and stability of AlxOy–AlNx–Al solar selective absorbing surface prepared by DC magnetron reactive sputtering , 2003 .

[23]  P. Oelhafen,et al.  Accelerated aging tests of chromium containing amorphous hydrogenated carbon coatings for solar collectors , 1998 .

[24]  H. Barshilia,et al.  Spectroscopic ellipsometric characterization of TiAlN/TiAlON/Si3N4 tandem absorber for solar selective applications , 2008 .

[25]  E. Pedersen,et al.  Raman spectra of amorphous Al2O3 and Al2O3/MoO3 obtained by visible and infrared excitation , 1991 .

[26]  S. Berthier,et al.  Pt-Al2O3 selective cermet coatings on superalloy substrates for photothermal conversion up to 600°C , 1985 .

[27]  R. Grigorovici,et al.  Optical Properties and Electronic Structure of Amorphous Germanium , 1966, 1966.

[28]  S. Lau,et al.  Bond contraction and lone pair interaction at nitride surfaces , 2001 .

[29]  Influence of thermal annealing on optical properties and structure of aluminium oxide thin films by filtered cathodic vacuum arc , 2004 .

[30]  A. Atkinson.  Transport processes during the growth of oxide films at elevated temperature , 1985 .

[31]  F. Wooten,et al.  Optical Properties of Solids , 1972 .

[32]  D. Bhattacharyya,et al.  Spectroscopic ellipsometric study on dispersion of optical constants of Gd2O3 films , 2005 .

[33]  M. C. Bhatnagar,et al.  Ni-Al2O3 selective cermet coatings for photothermal conversion up to 500°C , 1990 .