CFD-DEM modelling and simulation of pneumatic conveying: A review

[1]  A. Yu,et al.  Prediction of separation performance of hydrocyclones by a PC-based model , 2019, Separation and Purification Technology.

[2]  A. Yu,et al.  Lattice Boltzmann investigation of non-Newtonian fluid flow through a packed bed of uniform spheres , 2019, Powder Technology.

[3]  A. Levy,et al.  Collision Characteristics for Predicting Particle Attrition and Pipe Wear in Conveying Systems , 2018 .

[4]  K. Cen,et al.  Multiscale investigation of tube erosion in fluidized bed based on CFD-DEM simulation , 2018 .

[5]  A. Yu,et al.  Modeling the Multiphase Flow in Hydrocyclones Using the Coarse-Grained Volume of Fluid—Discrete Element Method and Mixture-Discrete Element Method Approaches , 2018, Industrial & Engineering Chemistry Research.

[6]  A. Levy,et al.  Energy absorption by the particle and the surface during impact , 2018 .

[7]  A. Yu,et al.  Investigation on vertical plug formation of coarse particles in a non-mechanical feeder by CFD-DEM coupling method , 2018, Powder Technology.

[8]  George E. Klinzing,et al.  A review of pneumatic conveying status, advances and projections , 2018, Powder Technology.

[9]  J. Tu,et al.  A fine LES-DEM coupled simulation of gas-large particle motion in spouted bed using a conservative virtual volume fraction method , 2018 .

[10]  S. Zigan,et al.  Particle attrition mechanisms, their characterisation, and application to horizontal lean phase pneumatic conveying systems: A review , 2018, Powder Technology.

[11]  A. Yu,et al.  Model A vs. Model B in the modelling of particle-fluid flow , 2018 .

[12]  Kun Luo,et al.  Numerical prediction of wear in SAG mills based on DEM simulations , 2018 .

[13]  B. Moghtaderi,et al.  Computational investigation of particle flow characteristics in pressurised dense phase pneumatic conveying systems , 2018 .

[14]  Hongjun Zhu,et al.  Investigation of erosion behaviors of sulfur-particle-laden gas flow in an elbow via a CFD-DEM coupling method , 2018 .

[15]  A. Yu,et al.  Lattice Boltzmann investigation of the wake effect on the interaction between particle and power-law fluid flow , 2018 .

[16]  Aibing Yu,et al.  Review on Modeling and Simulation of Blast Furnace , 2018 .

[17]  Jianping Li,et al.  Numerical study of coarse coal particle breakage in pneumatic conveying , 2017, Particuology.

[18]  Lei Xu,et al.  An erosion model for the discrete element method , 2017 .

[19]  Ruixue Cheng,et al.  Effect of particle degradation on electrostatic sensor measurements and flow characteristics in dilute pneumatic conveying , 2017 .

[20]  Songyong Liu,et al.  Effect of the particle shape and swirling intensity on the breakage of lump coal particle in pneumatic conveying , 2017 .

[21]  M. Papalexandris,et al.  Numerical Study of the Influence of the Powder and Pipe Properties on Electrical Charging During Pneumatic Conveying , 2017 .

[22]  Jianping Li,et al.  Effects of particle shape and swirling intensity on elbow erosion in dilute-phase pneumatic conveying , 2017 .

[23]  M. Ye,et al.  Experimental and numerical study of particle velocity distribution in the vertical pipe after a 90° elbow , 2017 .

[24]  A. Yu,et al.  DEM-based virtual experimental blast furnace: A quasi-steady state model , 2017 .

[25]  Aibing Yu,et al.  A DEM-based approach for analyzing energy transitions in granular and particle-fluid flows , 2017 .

[26]  M. Crapper,et al.  CFD–DEM simulation of turbulence modulation in horizontal pneumatic conveying , 2017 .

[27]  Avi Uzi,et al.  Erosion prediction of industrial conveying pipelines , 2017 .

[28]  Yongzhi Zhao,et al.  CFD–DEM simulation of tube erosion in a fluidized bed , 2017 .

[29]  Aibing Yu,et al.  A GPU-based DEM approach for modelling of particulate systems , 2016 .

[30]  Aibing Yu,et al.  DEM/CFD-DEM Modelling of Non-spherical Particulate Systems: Theoretical Developments and Applications , 2016 .

[31]  Qian Zhang,et al.  Numerical prediction of erosion in elbow based on CFD-DEM simulation , 2016 .

[32]  Haim Kalman,et al.  A novel particle attrition model for conveying systems , 2016 .

[33]  Aibing Yu,et al.  Applicability of a coarse-grained CFD–DEM model on dense medium cyclone , 2016 .

[34]  M. Crapper,et al.  Numerical and experimental study of horizontal pneumatic transportation of spherical and low-aspect-ratio cylindrical particles , 2016 .

[35]  George E. Klinzing,et al.  Review of unusual and some unexplained phenomena in pneumatic conveying , 2016 .

[36]  A. Yu,et al.  Lattice–Boltzmann simulation of fluid flow through packed beds of uniform ellipsoids , 2015 .

[37]  Junwei Su,et al.  A two‐layer mesh method for discrete element simulation of gas‐particle systems with arbitrarily polyhedral mesh , 2015 .

[38]  W. George,et al.  Four-way coupled simulations of small particles in turbulent channel flow: The effects of particle shape and Stokes number , 2015 .

[39]  Harald Kruggel-Emden,et al.  Numerical study of rope formation and dispersion of non-spherical particles during pneumatic conveying in a pipe bend , 2014 .

[40]  Siamack A. Shirazi,et al.  A comprehensive review of solid particle erosion modeling for oil and gas wells and pipelines applications , 2014 .

[41]  Qiaoqun Sun,et al.  A DEM simulation of dry and wet particle flow behaviors in riser , 2014 .

[42]  Yingke Liu,et al.  CFD–DEM simulation of the pneumatic conveying of fine particles through a horizontal slit , 2014 .

[43]  A. Yu,et al.  Lattice-Boltzmann simulation of fluid flow through packed beds of spheres: Effect of particle size distribution , 2014 .

[44]  S. Dash,et al.  Two-fluid modeling of turbulent particle-gas suspensions in vertical pipes , 2014 .

[45]  Heng Xiao,et al.  Diffusion-Based Coarse Graining in Hybrid Continuum-Discrete Solvers: Theoretical Formulation and A Priori Tests , 2014, 1409.0001.

[46]  Jam Hans Kuipers,et al.  Integrated DEM–CFD modeling of the contact charging of pneumatically conveyed powders , 2014 .

[47]  Haim Kalman,et al.  Friction forces of particulate plugs moving in vertical and horizontal pipes , 2014 .

[48]  Martin Crapper,et al.  Experimental and Simulation Studies of Dilute Horizontal Pneumatic Conveying , 2014 .

[49]  Karl Sommer,et al.  Application of the principles of gas permeability and stochastic particle agitation to predict the pressure loss in slug flow pneumatic conveying systems , 2014 .

[50]  Aibing Yu,et al.  Prediction of wear and its effect on the multiphase flow and separation performance of dense medium cyclone , 2014 .

[51]  Niranjana Behera,et al.  Modeling and analysis of dilute phase pneumatic conveying of fine particles , 2013 .

[52]  Danesh K. Tafti,et al.  A novel two-grid formulation for fluid–particle systems using the discrete element method , 2013 .

[53]  A. Yu,et al.  Lattice-Boltzmann simulation of fluid flow through packed beds of uniform spheres: Effect of porosity , 2013 .

[54]  Aibing Yu,et al.  Application of periodic boundary conditions to CFD-DEM simulation of gas–solid flow in pneumatic conveying , 2013 .

[55]  Runyu Yang,et al.  DEM study of the transverse mixing of wet particles in rotating drums , 2013 .

[56]  Haim Kalman,et al.  Impact velocity and compression force relationship — Equivalence function , 2013 .

[57]  Aibing Yu,et al.  Gas–Solid Flow and Energy Dissipation in Inclined Pneumatic Conveying , 2012 .

[58]  Aibing Yu,et al.  Finite element analysis of the contact forces between a viscoelastic sphere and rigid plane , 2012 .

[59]  Aibing Yu,et al.  Prediction of the performance of dense medium cyclones in coal preparation , 2012 .

[60]  Bruno C. Hancock,et al.  Numerical simulation of dilute turbulent gas‐particle flow with turbulence modulation , 2012 .

[61]  Jun Yao,et al.  Pneumatic transport of granular materials with electrostatic effects , 2012 .

[62]  Christopher M. Wensrich,et al.  Horizontal slug flow pneumatic conveying: numerical simulation and analysis of a thin slice approximation , 2011 .

[63]  E. Michaelides,et al.  A reinterpretation of the Odar and Hamilton data on the unsteady equation of motion of particles , 2011 .

[64]  Aibing Yu,et al.  Micromechanic modeling and analysis of the flow regimes in horizontal pneumatic conveying , 2011 .

[65]  M. Sommerfeld,et al.  Multiphase Flows with Droplets and Particles , 2011 .

[66]  Wei Ge,et al.  Quasi-real-time simulation of rotating drum using discrete element method with parallel GPU computing , 2011 .

[67]  Haim Kalman,et al.  DEM simulation of particle attrition in dilute-phase pneumatic conveying , 2011 .

[68]  Paul Zulli,et al.  Gas–solid flow in an ironmaking blast furnace-II: Discrete particle simulation , 2011 .

[69]  Aibing Yu,et al.  Finite element analysis of the rolling friction of a viscous particle on a rigid plane , 2011 .

[70]  P. Cleary,et al.  The influence of particle shape on flow modes in pneumatic conveying , 2011 .

[71]  A. Yu,et al.  Discrete particle simulation of particle–fluid flow: model formulations and their applicability , 2010, Journal of Fluid Mechanics.

[72]  Changsui Zhao,et al.  Numerical simulation on dense phase pneumatic conveying of pulverized coal in horizontal pipe at high pressure , 2010 .

[73]  Jiansheng Xiang,et al.  An investigation of segregation and mixing in dense phase pneumatic conveying , 2010 .

[74]  P. Cleary,et al.  Dynamics of gas–solid fluidised beds with non-spherical particle geometry , 2010 .

[75]  Kunn Hadinoto,et al.  Reynolds number dependence of gas-phase turbulence in particle-laden flows: Effects of particle inertia and particle loading , 2009 .

[76]  Soumya Suddha Mallick,et al.  Minimum transport boundaries for pneumatic conveying of powders , 2009 .

[77]  I. Lecreps,et al.  Stress States and Porosity within Horizontal Slug by Dense-Phase Pneumatic Conveying , 2009 .

[78]  Aibing Yu,et al.  Computational Study of Flow Regimes in Vertical Pneumatic Conveying , 2009 .

[79]  Haim Kalman,et al.  A new method to implement comminution functions into DEM simulation of a size reduction system due to particle-wall collisions , 2009 .

[80]  Abdallah S. Berrouk,et al.  Accurate void fraction calculation for three-dimensional discrete particle model on unstructured mesh , 2009 .

[81]  Seiichi Koshizuka,et al.  Large-scale discrete element modeling in pneumatic conveying , 2009 .

[82]  A. Yu,et al.  Stress fields of solid flow in a model blast furnace , 2009 .

[83]  Runyu Yang,et al.  Discrete particle simulation of particulate systems: A review of major applications and findings , 2008 .

[84]  Aibing Yu,et al.  A new point-locating algorithm under three-dimensional hybrid meshes , 2008 .

[85]  Aibing Yu,et al.  Numerical Simulation of the Gas-Solid Flow in Three-Dimensional Pneumatic Conveying Bends , 2008 .

[86]  Andreas Hölzer,et al.  New simple correlation formula for the drag coefficient of non-spherical particles , 2008 .

[87]  John R. Pugh,et al.  Bend Pressure Drop Predictions Using the Euler-Euler Model in Dense Phase Pneumatic Conveying , 2007 .

[88]  Edmund F. Rybicki,et al.  Comparison of computed and measured particle velocities and erosion in water and air flows , 2007 .

[89]  A. Yu,et al.  Discrete particle simulation of particulate systems: Theoretical developments , 2007 .

[90]  Yan Zhang,et al.  Pneumatic Transport of Granular Materials in an Inclined Conveying Pipe: Comparison of Computational Fluid Dynamics−Discrete Element Method (CFD−DEM), Electrical Capacitance Tomography (ECT), and Particle Image Velocimetry (PIV) Results , 2007 .

[91]  Benny Kuan,et al.  Dilute gas–solid two-phase flows in a curved 90∘ duct bend: CFD simulation with experimental validation , 2007 .

[92]  Harald Kruggel-Emden,et al.  Review and extension of normal force models for the Discrete Element Method , 2007 .

[93]  J. Kuipers,et al.  Drag force of intermediate Reynolds number flow past mono- and bidisperse arrays of spheres , 2007 .

[94]  Yan Zhang,et al.  Effects of an electrostatic field in pneumatic conveying of granular materials through inclined and vertical pipes , 2006 .

[95]  R. Chhabra,et al.  Flow of Power-Law Fluids Past a Sphere at Intermediate Reynolds Numbers , 2006 .

[96]  Satoru Watano,et al.  Mechanism and control of electrification in pneumatic conveying of powders , 2006 .

[97]  Eldin Wee Chuan Lim,et al.  Diffusion Modeling of Bulk Granular Attrition , 2006 .

[98]  P. Langston,et al.  Horizontal pneumatic conveying: a 3d distinct element model , 2006 .

[99]  Aibing Yu,et al.  Discrete element simulation for pneumatic conveying of granular material , 2006 .

[100]  Zhulin Yuan,et al.  Three-dimensional numerical simulation method for gas–solid injector , 2005 .

[101]  John R. Pugh,et al.  Axial and Radial Pressure Drops of Dense Phase Plugs , 2005 .

[102]  Hans Jürgen Herrmann,et al.  Plug conveying in a horizontal tube , 2005, cond-mat/0501719.

[103]  P. Cundall,et al.  A bonded-particle model for rock , 2004 .

[104]  Madhumita B. Ray,et al.  Pneumatic transport of granular materials through a 90° bend , 2004 .

[105]  Gerhard Niederreiter,et al.  Modeling and experimental validation of pressure drop for pneumatic plug conveying , 2004 .

[106]  Chun Kit Wong,et al.  Pneumatic conveying of granular solids in horizontal and inclined pipes , 2004 .

[107]  Hans Jürgen Herrmann,et al.  Plug conveying in a vertical tube , 2004, cond-mat/0407757.

[108]  M. G. Jones,et al.  Stress-Field Modeling and Pressure Drop Prediction for Slug-Flow Pneumatic Conveying in an Aerated Radial Stress Chamber , 2004 .

[109]  Arun S. Mujumdar,et al.  A Numerical Study of Heat Transfer Mechanisms in Gas–Solids Flows Through Pipes Using a Coupled CFD and DEM Model , 2003 .

[110]  Shrikant Dhodapkar,et al.  Friction measurement in dense phase plug flow analysis , 2003 .

[111]  Seiji Saito,et al.  Numerical simulation of electrostatic charge in powder pneumatic conveying process , 2003 .

[112]  Tom Dyakowski,et al.  Solids deposition in low-velocity slug flow pneumatic conveying , 2003 .

[113]  Peter W Wypych,et al.  Minimum transport boundary for horizontal dense-phase pneumatic conveying of granular materials , 2003 .

[114]  Haim Kalman,et al.  DEM simulation for attrition of salt during dilute-phase pneumatic conveying , 2003 .

[115]  M. G. Jones,et al.  Analysis of Gas-Solids Feeding and Slug Formation in Low-Velocity Pneumatic Conveying , 2003 .

[116]  A. Yu,et al.  Averaging method of granular materials. , 2002, Physical review. E, Statistical, nonlinear, and soft matter physics.

[117]  P. A. Jayantha, I. W. Turner.  A COMPARISON OF GRADIENT APPROXIMATIONS FOR USE IN FINITE-VOLUME COMPUTATIONAL MODELS FOR TWO-DIMENSIONAL DIFFUSION EQUATIONS , 2001 .

[118]  Edward K. Levy,et al.  Formation and dispersion of ropes in pneumatic conveying , 2001 .

[119]  Avi Levy,et al.  Two-fluid approach for plug flow simulations in horizontal pneumatic conveying , 2000 .

[120]  R. Pan,et al.  Material properties and flow modes in pneumatic conveying , 1999 .

[121]  A. Yu,et al.  Rolling friction in the dynamic simulation of sandpile formation , 1999 .

[122]  T. Schwager,et al.  Coefficient of restitution of colliding viscoelastic spheres. , 1999, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[123]  B. Oesterlé,et al.  Experiments on the lift of a spinning sphere in a range of intermediate Reynolds numbers , 1998 .

[124]  Aibing Yu,et al.  Numerical simulation of the gas-solid flow in a fluidized bed by combining discrete particle method with computational fluid dynamics , 1997 .

[125]  O. Molerus,et al.  Overview: Pneumatic transport of solids , 1996 .

[126]  P. A. Langston,et al.  Discrete element simulation of internal stress and flow fields in funnel flow hoppers , 1995 .

[127]  K. Ludema,et al.  Wear models and predictive equations: their form and content , 1995 .

[128]  P. A. Langston,et al.  Discrete element simulation of granular flow in 2D and 3D hoppers: Dependence of discharge rate and wall stress on particle interactions , 1995 .

[129]  Peter W Wypych,et al.  Pressure drop prediction in low-velocity pneumatic conveying , 1994 .

[130]  P. Langston,et al.  Continuous potential discrete particle simulations of stress and velocity fields in hoppers: transition from fluid to granular flow , 1994 .

[131]  R. D. Felice,et al.  The voidage function for fluid-particle interaction systems , 1994 .

[132]  Y. Tsuji,et al.  Discrete particle simulation of two-dimensional fluidized bed , 1993 .

[133]  Yutaka Tsuji,et al.  Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe , 1992 .

[134]  K. Konrad,et al.  Dense-phase pneumatic conveying: A review , 1986 .

[135]  K. Konrad,et al.  The gas—liquid analogy in horizontal dense-phase pneumatic conveying , 1984 .

[136]  A. Gosman,et al.  Aspects of Computer Simulation of Liquid-Fueled Combustors , 1983 .

[137]  Kazuo Ohmi,et al.  Numerical processing of flow-visualization pictures – measurement of two-dimensional vortex flow , 1983, Journal of Fluid Mechanics.

[138]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[139]  P. Saffman.  The lift on a small sphere in a slow shear flow , 1965, Journal of Fluid Mechanics.

[140]  S. I. Rubinow,et al.  The transverse force on a spinning sphere moving in a viscous fluid , 1961, Journal of Fluid Mechanics.

[141]  I. Finnie.  Erosion of surfaces by solid particles , 1960 .

[142]  Chandana Ratnayake,et al.  A review of CFD modelling studies on pneumatic conveying and challenges in modelling offshore drill cuttings transport , 2017 .

[143]  Behdad Moghtaderi,et al.  A modified direct method for void fraction calculation in CFD–DEM simulations , 2016 .

[144]  Yuanquan Xiong,et al.  Effect of moisture content on dense-phase pneumatic conveying of pulverized lignite under high pressure , 2016 .

[145]  Berend van Wachem,et al.  Modelling of gas–solid turbulent channel flow with non-spherical particles with large Stokes numbers , 2015 .

[146]  K. Vollmari,et al.  Numerical Investigation of the Mixing of Non-spherical Particles in Fluidized Beds and during Pneumatic Conveying☆ , 2015 .

[147]  Aibing Yu,et al.  Numerical study of horizontal pneumatic conveying: Effect of material properties , 2014 .

[148]  Aibing Yu,et al.  Computational investigation of horizontal slug flow in pneumatic conveying , 2008 .

[149]  Hans J. Herrmann,et al.  Simulations of Dense-phase Pneumatic Conveying , 2006 .

[150]  T. ORourke,et al.  Practical Approaches to Sand Management , 2004 .

[151]  B.P.B. Hoomans,et al.  Comments on the paper "Numerical simulation of the gas-solid flow in a fluidized bed by combining discrete particle method with computational fluid dynamics" , 1998 .

[152]  Clayton T. Crowe,et al.  Numerical models for two-phase turbulent flows , 1996 .

[153]  Joel H. Ferziger,et al.  Computational methods for fluid dynamics , 1996 .

[154]  R. Mei.  An approximate expression for the shear lift force on a spherical particle at finite reynolds number , 1992 .

[155]  I. Finnie.  Some observations on the erosion of ductile metals , 1972 .

[156]  C. Wen.  Mechanics of Fluidization , 1966 .

[157]  S. Ergun.  Fluid flow through packed columns , 1952 .