Realistic Trench Film Cooling With a Thermal Barrier Coating and Deposition

[1]  J. Dees,et al.  An Experimental Study of Thermal Barrier Coatings and Film Cooling on an Internally Cooled Simulated Turbine Vane , 2011 .

[2]  Jason E. Albert,et al.  Experimental Simulation of Contaminant Deposition on a Film Cooled Turbine Airfoil Leading Edge , 2012 .

[3]  Jason E. Dees,et al.  Experimental Measurements and Computational Predictions for an Internally Cooled Simulated Turbine Vane , 2012 .

[4]  F. Soechting.  A design perspective on thermal barrier coatings , 1999 .

[5]  J. Bons,et al.  Coal Ash Deposition on Nozzle Guide Vanes: Part I—Experimental Characteristics of Four Coal Ash Types , 2013 .

[6]  Scott Lewis,et al.  Effects of Temperature and Particle Size on Deposition in Land Based Turbines , 2008 .

[7]  Ann Bolcavage,et al.  Technical and Economical Aspects of Current Thermal Barrier Coating Systems for Gas Turbine Engines by Thermal Spray and EBPVD: A Review , 2008 .

[8]  Widen Tabakoff,et al.  Erosion and Deposition in Turbomachinery , 2006 .

[9]  Karen A. Thole,et al.  Simulations of Multiphase Particle Deposition on Endwall Film-Cooling , 2012 .

[10]  Jason Edward Albert.  Experimental simulation and mitigation of contaminant deposition on film cooled gas turbine airfoils , 2011 .

[11]  Ronald Scott Bunker,et al.  The Effects of Manufacturing Tolerances on Gas Turbine Cooling , 2009 .

[12]  Scott Lewis,et al.  Film Cooling Effectiveness and Heat Transfer Near Deposit-Laden Film Holes , 2011 .

[13]  Jason E. Dees,et al.  Overall and Adiabatic Effectiveness Values on a Scaled Up, Simulated Gas Turbine Vane , 2013 .

[14]  D. Bogard,et al.  High-Resolution Film Cooling Effectiveness Measurements of Axial Holes Embedded in a Transverse Trench With Various Trench Configurations , 2007 .

[15]  J. M. Cutbirth,et al.  Effects of Showerhead Cooling on Turbine Vane Suction Side Film Cooling Effectiveness , 2000, Heat Transfer: Volume 3.

[16]  Jason E. Albert,et al.  Measurements of adiabatic film and overall cooling effectiveness on a turbine vane pressure side with a trench , 2013 .

[17]  Karen A. Thole,et al.  Gas Turbine Film Cooling , 2006 .

[18]  Jeffrey P. Bons,et al.  Effect of Particle Size and Trench Configuration on Deposition From Fine Coal Flyash near Film Cooling Holes , 2011 .

[19]  M. L. Laucks,et al.  Aerosol Technology Properties, Behavior, and Measurement of Airborne Particles , 2000 .

[20]  D. V. Rigney,et al.  PVD thermal barrier coating applications and process development for aircraft engines , 1997 .

[21]  Jason E. Albert,et al.  Experimental Simulation of Contaminant Deposition on a Film-Cooled Turbine Vane Pressure Side With a Trench , 2013 .

[22]  E. Jordan,et al.  Thermal Barrier Coatings for Gas-Turbine Engine Applications , 2002, Science.

[23]  Terry Wall,et al.  Thermal conductivity of coal ash and slags and models used , 2000 .

[24]  Robert J. Moffat,et al.  Describing the Uncertainties in Experimental Results , 1988 .

[25]  Jason E. Dees,et al.  Overall and Adiabatic Effectiveness Values on a Scaled Up, Simulated Gas Turbine Vane: Part I—Experimental Measurements , 2011 .

[26]  Jeffrey P. Bons,et al.  High-Pressure Turbine Deposition in Land-Based Gas Turbines From Various Synfuels , 2007 .

[27]  S. J. Kline,et al.  Describing Uncertainties in Single-Sample Experiments , 1953 .