Recovery rate prediction in lunar regolith simulant drilling

Abstract Drilling and coring, as an effective way to acquire lunar regolith along the depth, is widely used in the field of planetary explorations. Because there is no relative sliding between the lunar regolith and the flexible tube, using the flexible tube coring method can acquire high recovery rate and keep the stratification of regolith samples. Very little work has been done to analyze the flexible tube coring process. A proper understanding of the coring process is necessary to develop the drilling strategy and verify whether the designed drill tool is appropriate. In this paper, two models are developed to analyze stress distribution in lunar regolith simulant during coring. Based on the developed models, a prediction method of recovery rate is developed to analyze the influence of the drilling parameters on the recovery rate. Comparison of the model calculation results with data of drilling and coring experiments demonstrated that the model based on the Terzaghi bearing theory can effectively predict the tendency when the recovery rate begins to decrease.

[1]  W. D. Carrier,et al.  Lunar soil grain size distribution , 1973 .

[2]  É. Clément,et al.  Pressure screening and fluctuations at the bottom of a granular column , 1999, cond-mat/9904090.

[3]  Yoseph Bar-Cohen,et al.  Drilling and Excavation for Construction and In-Situ Resource Utilization , 2009 .

[4]  Shi Xiaomeng,et al.  Analysis and test research on influencing factors of drilling and coring quantity of lunar soil simulant , 2015 .

[5]  A. Ercoli Finzi,et al.  SD2 – How To Sample A Comet , 2007 .

[6]  R. M. Nedderman.  Statics and Kinematics of Granular Materials: The method of differential slices , 1992 .

[7]  R. Chand,et al.  Influence of spontaneous percolation on apparent mass at the bottom of a Janssen granular column , 2014 .

[8]  Haibo Wang.  Effect of the Solving Method of Parameters on the Description Ability of the Yield Criterion about the Anisotropic Behavior , 2013 .

[9]  Yang Gao,et al.  Investigation of the properties of icy lunar polar regolith simulants , 2016 .

[10]  Judith Haley Allton,et al.  Catalog of Apollo lunar surface geological sampling tools and containers , 1989 .

[11]  Gale Paulsen,et al.  Robotics and Automation for “Icebreaker” , 2014, J. Field Robotics.

[12]  Zongquan Deng,et al.  Vibratory compaction method for preparing lunar regolith drilling simulant , 2016 .

[13]  James K. Mitchell,et al.  Mechanical properties of lunar soil - Density, porosity, cohesion, and angle of internal friction. , 1972 .

[14]  Q. Shi,et al.  Bottom stresses of static packing of granular chains , 2015, 1903.10664.

[15]  I. Crawford,et al.  Lunar exploration: opening a window into the history and evolution of the inner Solar System , 2014, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[16]  Wei Chen,et al.  Numerical studies of seismically induced slope deformation using smoothed particle hydrodynamics method , 2012 .

[17]  Sathya Hanagud,et al.  Automated, Real-Time Health Monitoring of Structures for Interplanetary Exploration Systems , 2012 .

[18]  Christopher Brunskill,et al.  Regolith simulant preparation methods for hardware testing , 2010 .

[19]  Rolando Gelmi,et al.  Seismic While Drilling (SWD) methodology in support to Moon subsurface stratigraphy investigations , 2015 .

[20]  Deng Zong-qua.  Research on New Structure Coring Bit for Extraterrestrial Bodies Exploration , 2013 .

[21]  Stewart Sherrit,et al.  Extraterrestrial Drilling and Excavation , 2009 .

[22]  I. I. Cherkasov,et al.  Automatic stations for investigation of the lunar surface. , 1976 .