A two and three-dimensional CFD investigation into performance prediction and wake characterisation of a vertical axis turbine

The emergence of tidal energy as a key renewable energy source requires the development of computational design models for accurate prediction of turbine performance and wake effects whilst also being computationally efficient. In this paper, we develop and validate a three-dimensional CFD model for vertical axis turbines, which achieves high accuracy. We also investigate the limitations of two-dimensional models and present a blockage correction for improved prediction. The two-dimensional blockage correction model is potentially attractive for preliminary design studies due to its computational advantage over three-dimensional models.The emergence of tidal energy as a key renewable energy source requires the development of computational design models for accurate prediction of turbine performance and wake effects whilst also being computationally efficient. In this paper, we develop and validate a three-dimensional CFD model for vertical axis turbines, which achieves high accuracy. We also investigate the limitations of two-dimensional models and present a blockage correction for improved prediction. The two-dimensional blockage correction model is potentially attractive for preliminary design studies due to its computational advantage over three-dimensional models.

[1]  M. Wosnik,et al.  Modeling the near-wake of a vertical-axis cross-flow turbine with 2-D and 3-D RANS , 2016, 1604.02611.

[2]  Sander M. Calisal,et al.  A Discrete Vortex Method for Simulating a Stand-Alone Tidal-Current Turbine: Modeling and Validation , 2010 .

[3]  Rajat Gupta,et al.  Computational fluid dynamics analysis of a twisted three-bladed H-Darrieus rotor , 2010 .

[4]  A. Ghosh,et al.  Computational analysis of flow physics of a combined three bladed Darrieus Savonius wind rotor , 2015 .

[5]  Stephen Nash,et al.  A review of the current understanding of the hydro-environmental impacts of energy removal by tidal turbines , 2017 .

[6]  Abdolrahim Rezaeiha,et al.  Effect of pitch angle on power performance and aerodynamics of a vertical axis wind turbine , 2017 .

[7]  M. H. Mohamed.  Impacts of solidity and hybrid system in small wind turbines performance , 2013 .

[8]  C. Osorio,et al.  Simulation and evaluation of a straight-bladed Darrieus-type cross flow marine turbine , 2010 .

[9]  J. H. Strickland,et al.  A Vortex Model of the Darrieus Turbine: An Analytical and Experimental Study , 1979 .

[10]  Gábor Janiga,et al.  Optimal blade shape of a modified Savonius turbine using an obstacle shielding the returning blade , 2011 .

[11]  Sander M. Calisal,et al.  Three-dimensional effects and arm effects on modeling a vertical axis tidal current turbine , 2010 .

[12]  Valentina Motta,et al.  Three-dimensional simulation of a complete Vertical Axis Wind Turbine using overlapping grids , 2014, J. Comput. Appl. Math..

[13]  Didier Imbault,et al.  A design methodology for cross flow water turbines , 2010 .

[14]  J. Spurk.  Boundary Layer Theory , 2019, Fluid Mechanics.

[15]  M. H. Mohamed,et al.  Performance investigation of H-rotor Darrieus turbine with new airfoil shapes , 2012 .

[16]  Giles Thomas,et al.  Three dimensional numerical simulations of a straight-bladed vertical axis tidal turbine , 2012 .

[17]  F. Trivellato,et al.  On the Courant–Friedrichs–Lewy criterion of rotating grids in 2D vertical-axis wind turbine analysis , 2014 .

[18]  Chao Li,et al.  2.5D large eddy simulation of vertical axis wind turbine in consideration of high angle of attack flow , 2013 .

[19]  Qi Wang,et al.  Three-dimensional numerical analysis on blade response of a vertical-axis tidal current turbine under operational conditions , 2014 .

[20]  Ion Paraschivoiu.  Predicted and experimental aerodynamic forces on the Darrieus rotor , 1983 .

[21]  Santiago Laín,et al.  Numerical simulations of active flow control with synthetic jets in a Darrieus turbine , 2017 .

[22]  Ye Li,et al.  Three-dimensional Improved Delayed Detached Eddy Simulation of a two-bladed vertical axis wind turbine , 2017 .

[23]  Ernesto Benini,et al.  The Darrieus wind turbine: Proposal for a new performance prediction model based on CFD , 2011 .

[24]  Ning Qin,et al.  Wind tunnel and numerical study of a small vertical axis wind turbine , 2008 .

[25]  Giovanni Ferrara,et al.  Critical issues in the CFD simulation of Darrieus wind turbines , 2016 .

[26]  R. Templin.  Aerodynamic performance theory for the NRC vertical-axis wind turbine , 1974 .

[27]  Stefano Mauro,et al.  2D CFD Modeling of H-Darrieus Wind Turbines Using a Transition Turbulence Model , 2014 .

[28]  M. Wosnik,et al.  Effects of Reynolds Number on the Energy Conversion and Near-Wake Dynamics of a High Solidity Vertical-Axis Cross-Flow Turbine , 2016 .

[29]  Antonio Messineo,et al.  3D CFD Analysis of a Vertical Axis Wind Turbine , 2015 .

[30]  L. Ferrari,et al.  Dimensionless numbers for the assessment of mesh and timestep requirements in CFD simulations of Darrieus wind turbines , 2016 .

[31]  A. Simonović,et al.  Numerical and Analytical Investigation of Vertical Axis Wind Turbine , 2013 .

[32]  Bo Yang,et al.  Fluid dynamic performance of a vertical axis turbine for tidal currents , 2011 .

[33]  Derek B. Ingham,et al.  CFD Sensitivity Analysis of a Straight-Blade Vertical Axis Wind Turbine , 2012 .

[34]  Mahdi Zamani,et al.  Starting torque improvement using J-shaped straight-bladed Darrieus vertical axis wind turbine by means of numerical simulation , 2016 .

[35]  Jin-Hak Yi,et al.  On the natural frequency of tidal current power systems—A discussion of sea testing , 2014 .

[36]  Yingxue Yao,et al.  Effect of Camber Airfoil on Self Starting of Vertical Axis Wind Turbine , 2011 .

[37]  Giles Thomas,et al.  Three-dimensional numerical simulations of straight-bladed vertical axis tidal turbines investigating power output, torque ripple and mounting forces , 2015 .

[38]  Mahdi Zamani,et al.  Three dimensional simulation of J-shaped Darrieus vertical axis wind turbine , 2016 .

[39]  R. E. Sheldahl,et al.  Aerodynamic Characteristics of Seven Symmetrical Airfoil Sections Through 180-Degree Angle of Attack for Use in Aerodynamic Analysis of Vertical Axis Wind Turbines , 1981 .

[40]  T. N. Croft,et al.  Performance assessment of a vertical axis turbine in a marine current flume tank and CFD modelling , 2015 .

[41]  Stefania Zanforlin,et al.  3D URANS analysis of a vertical axis wind turbine in skewed flows , 2015 .

[42]  Thierry Maître,et al.  Modeling of the flow in a Darrieus water turbine: Wall grid refinement analysis and comparison with experiments , 2013 .

[43]  Flavien Billard,et al.  Turbulence modelling of low Reynolds number flow effects around a vertical axis turbine at a range of tip-speed ratios , 2014 .

[44]  Peter Bachant,et al.  Effectiveness of two-dimensional CFD simulations for Darrieus VAWTs: a combined numerical and experimental assessment , 2017 .

[45]  Fernando L. Ponta,et al.  A vortex model for Darrieus turbine using finite element techniques , 2001 .

[46]  Hester Bijl,et al.  Simulating dynamic stall in a two‐dimensional vertical‐axis wind turbine: verification and validation with particle image velocimetry data , 2010 .

[47]  M. Wosnik,et al.  Characterising the near-wake of a cross-flow turbine , 2015 .

[48]  J. Gordon Leishman,et al.  COMPARISON OF MOMENTUM AND VORTEX METHODS FOR THE AERODYNAMIC ANALYSIS OF WIND TURBINES , 2005 .

[49]  H. Lam,et al.  Study of wake characteristics of a vertical axis wind turbine by two- and three-dimensional computational fluid dynamics simulations , 2016 .

[50]  H. Glauert.  The elements of aerofoil and airscrew theory , 1926 .