Carrier generation and transport in bulk heterojunction films processed with 1,8-octanedithiol as a processing additive

Improved performance of polymer-based solar cells based on poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b′]dithiophene)-alt-4,7-(2,1,3-benzo-thiadiazole)] PCPDTBT has been obtained by using 1,8-octanedithiol (ODT) as a processing additive in the polymer solution used to spin cast the bulk heterojunction films. Although ultrafast spectroscopy studies indicate that the carrier losses are reduced in the films processed with ODT [similar to the reduced carrier losses after thermal annealing of bulk heterojunction (BHJ) materials made from P3HT:PCBM], the magnitude of the reduction is not sufficient to explain the observed factor of 2 increase in the power conversion efficiency. From the analysis of carrier transport in field effect transistors, we find increased electron mobility in the PCPDTBT:PC70BM composites when fabricated with ODT, which is indicative of enhanced connectivity of PC70BM networks. The improved electron mobility appears to be the primary origin of the improved power conversion ...

[1]  Daniel Moses,et al.  Photoinduced Carrier Generation in P3HT/PCBM Bulk Heterojunction Materials , 2008 .

[2]  Daniel Moses,et al.  Ultrafast Electron Transfer and Decay Dynamics in a Small Band Gap Bulk Heterojunction Material , 2007 .

[3]  A J Heeger,et al.  Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols. , 2007, Nature materials.

[4]  Christoph J. Brabec,et al.  Panchromatic Conjugated Polymers Containing Alternating Donor/Acceptor Units for Photovoltaic Applications , 2007 .

[5]  Daniel Moses,et al.  Method for increasing the photoconductive response in conjugated polymer/fullerene composites , 2006 .

[6]  Christoph J. Brabec,et al.  High Photovoltaic Performance of a Low‐Bandgap Polymer , 2006 .

[7]  Shinuk Cho,et al.  Ambipolar organic field-effect transistors fabricated using a composite of semiconducting polymer and soluble fullerene , 2006 .

[8]  Xiong Gong,et al.  New Architecture for High‐Efficiency Polymer Photovoltaic Cells Using Solution‐Based Titanium Oxide as an Optical Spacer , 2006 .

[9]  V. Sundström,et al.  Recombination studies in a polyfluorene copolymer for photovoltaic applications , 2005 .

[10]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[11]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[12]  O. Inganäs,et al.  Enhanced Photocurrent Spectral Response in Low‐Bandgap Polyfluorene and C70‐Derivative‐Based Solar Cells , 2005 .

[13]  David L. Carroll,et al.  High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1- phenyl-(6,6)C61 blends , 2005 .

[14]  V. Mihailetchi,et al.  Photocurrent generation in polymer-fullerene bulk heterojunctions. , 2004, Physical review letters.

[15]  Vladimir Dyakonov,et al.  Influence of nanomorphology on the photovoltaic action of polymer–fullerene composites , 2004 .

[16]  C. Winder,et al.  Low bandgap polymers for photon harvesting in bulk heterojunction solar cells , 2004 .

[17]  Mats Andersson,et al.  High‐Performance Polymer Solar Cells of an Alternating Polyfluorene Copolymer and a Fullerene Derivative , 2003 .

[18]  Christoph J. Brabec,et al.  A low-bandgap semiconducting polymer for photovoltaic devices and infrared emitting diodes , 2002 .

[19]  Ronald Österbacka,et al.  Spectroscopic Studies of Photoexcitations in Regioregular and Regiorandom Polythiophene Films , 2002 .

[20]  Christoph J. Brabec,et al.  Sensitization of low bandgap polymer bulk heterojunction solar cells , 2002 .

[21]  Jiang,et al.  Two-dimensional electronic excitations in self-assembled conjugated polymer nanocrystals , 2000, Science.

[22]  Moses,et al.  Ultrafast spectroscopic studies of photoinduced electron transfer from semiconducting polymers to C60. , 1994, Physical review. B, Condensed matter.

[23]  Mats Andersson,et al.  Substituted polythiophenes designed for optoelectronic devices and conductors , 1999 .