Optimization of fin arrangement and channel configuration in an airfoil fin PCHE for supercritical CO2 cycle

Abstract As a new type of discontinuous fin, airfoil fin (AFF) can bring a better thermal-hydraulic performance than Zigzag fin and S-shaped fin when applied to PCHE using supercritical CO 2 as a working fluid. In this study, the effects of AFF arrangements on heat transfer and flow resistance are investigated. The results show that a sparser staggered arrangement of fins can lead to a better thermal-hydraulic performance in an AFF PCHE and the flow resistance plays a major role in determining the overall performance. It concludes that reducing the flow resistance needs to be considered first in the optimal design of a PCHE using supercritical CO 2 as working fluid. Furthermore, a new fin structure (modified AFF) is proposed for flow resistance reduction and is proved to be better than the AFF.

[1]  Kazuhiko Kunitomi,et al.  Feasibility study on the applicability of a diffusion-welded compact intermediate heat exchanger to next-generation high temperature gas-cooled reactor , 1997 .

[2]  Yasuyoshi Kato,et al.  Thermal-Hydraulic Characteristics of a Printed Circuit Heat Exchanger in a Supercritical CO2 loop , 2005 .

[3]  F. Menter.  Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[5]  H. No,et al.  Thermal hydraulic performance analysis of a printed circuit heat exchanger using a helium–water test loop and numerical simulations , 2011 .

[6]  Y. Kato,et al.  Printed circuit heat exchanger thermal–hydraulic performance in supercritical CO2 experimental loop , 2006 .

[7]  Richard N. Christensen,et al.  Investigation of High-Temperature Printed Circuit Heat Exchangers for Very High Temperature Reactors , 2009 .

[8]  Francesc Reventos,et al.  International Course to Support Nuclear Licensing by User Training in the Areas of Scaling, Uncertainty, and 3D Thermal-Hydraulics/Neutron-Kinetics Coupled Codes: 3D S.UN.COP Seminars , 2008 .

[9]  Nasir Hayat,et al.  CFD applications in various heat exchangers design: A review , 2012 .

[10]  Shigenao Maruyama,et al.  Numerical investigation of near-critical fluid convective flow mixing in microchannels , 2013 .

[11]  Richard N. Christensen,et al.  Fabrication and design aspects of high-temperature compact diffusion bonded heat exchangers , 2012 .

[12]  N. Tsuzuki,et al.  Nusselt number correlations for a microchannel heat exchanger hot water supplier with S-shaped fins , 2009 .

[13]  Henryk Anglart,et al.  Theoretical and Numerical Study of Heat Transfer Deterioration in High Performance Light Water Reactor , 2008 .

[14]  Motoaki Utamura,et al.  A generalised mean temperature difference method for thermal design of heat exchangers , 2008 .

[15]  M. Anderson,et al.  Development of a new forced convection heat transfer correlation for CO2 in both heating and cooling modes at supercritical pressures , 2011 .

[16]  Yasuyoshi Kato,et al.  High performance printed circuit heat exchanger , 2007 .

[17]  Jae Eun Cha,et al.  Numerical investigation on thermal–hydraulic performance of new printed circuit heat exchanger model ☆ , 2008 .

[18]  Konstantin Nikitin,et al.  New printed circuit heat exchanger with S-shaped fins for hot water supplier , 2006 .

[19]  Chang Oh,et al.  Simplified Optimum Sizing and Cost Analysis for Compact heat Exchanger in VHTR , 2008 .

[20]  Y. Kato,et al.  Heat transfer and pressure drop correlations of microchannel heat exchangers with S-shaped and zigzag fins for carbon dioxide cycles , 2007 .

[21]  Jan Fokkens,et al.  Promising designs of compact heat exchangers for modular HTRs using the Brayton cycle , 2008 .

[22]  Kwang-Yong Kim,et al.  Optimization of zigzag flow channels of a printed circuit heat exchanger for nuclear power plant application , 2012 .