A review on current advances in the energy and environmental performance of buildings towards a more sustainable built environment
暂无分享,去创建一个
Eugénio Rodrigues | Adélio Rodrigues Gaspar | Ana Rita Amaral | Ehsan Asadi | Francisco B. Lamas | Marta B. Lopes | N. Soares | Joana Bastos | L. Dias Pereira | Amadeu M.V.M. Soares | H. Monteiro | Eugénio Rodrigues | E. Asadi | N. Soares | J. Bastos | A. Amaral | H. Monteiro | A. Gaspar | L. D. Pereira | Ana Soares | F. B. Lamas | Joana Bastos
[1] P. Torcellini,et al. Getting to Net Zero , 2009 .
[2] W. F. V. Raaij,et al. A behavioral model of residential energy use , 1983 .
[3] Paulo Peixoto,et al. The potential of energy behaviours in a smart(er) grid: Policy implications from a Portuguese exploratory study , 2016 .
[4] Hans-Jürgen Dr. Klüppel,et al. The Revision of ISO Standards 14040-3 - ISO 14040: Environmental management Life cycle assessment Principles and framework - ISO 14044: Environmental management Life cycle assessment Requirements and guidelines , 2005 .
[5] P. L. Gaspar,et al. Embodied energy on refurbishment vs. demolition: A southern Europe case study , 2015 .
[6] B. Olesen. Indoor environmental input parameters for the design and assessment of energy performance of buildings , 2015 .
[7] Carlos Henggeler Antunes,et al. Towards more effective behavioural energy policy: An integrative modelling approach to residential energy consumption in Europe , 2015 .
[8] Victor M. Ferreira,et al. Experimental testing and numerical modelling of masonry wall solution with PCM incorporation: A passive construction solution , 2012 .
[9] Ali Hajiah,et al. Simulation-based analysis of the use of PCM-wallboards to reduce cooling energy demand and peak-loads in low-rise residential heavyweight buildings in Kuwait , 2017 .
[10] Koen Steemers,et al. Energy retrofit and occupant behaviour in protected housing: A case study of the Brunswick Centre in London , 2014 .
[11] Chi-Chuan Wang,et al. System performance of R-1234yf refrigerant in air-conditioning and heat pump system – An overview of current status , 2014 .
[12] Ludger Fischer,et al. Rigid polyurethane foams incorporated with phase change materials: A state-of-the-art review and future research pathways , 2015 .
[13] Shady Attia,et al. Simulation-based decision support tool for early stages of zero-energy building design , 2012 .
[14] K. Sagara,et al. Latent Heat Storage Materials and Systems: A Review , 2005 .
[15] Maria Wall,et al. A planning process map for solar buildings in urban environments , 2016 .
[16] Michael Wimmer,et al. Instant architecture , 2003, ACM Trans. Graph..
[17] Zhonghao Rao,et al. Energy saving latent heat storage and environmental friendly humidity-controlled materials for indoor climate , 2012 .
[18] Chris Bales,et al. Combining thermal energy storage with buildings – a review , 2015 .
[19] L. Gustavsson,et al. Variability in energy and carbon dioxide balances of wood and concrete building materials , 2006 .
[20] Paolo Maria Congedo,et al. Multi-criteria optimization analysis of external walls according to ITACA protocol for zero energy buildings in the mediterranean climate , 2014 .
[21] Gloria P. Gerilla,et al. An environmental assessment of wood and steel reinforced concrete housing construction , 2007 .
[22] P. Wargocki,et al. Literature survey on how different factors influence human comfort in indoor environments , 2011 .
[23] Brian Norton,et al. Phase change materials for photovoltaic thermal management , 2015 .
[24] Jonathan A. Wright,et al. Optimization of building thermal design and control by multi-criterion genetic algorithm , 2002 .
[25] Georgios Kokogiannakis,et al. Thermal management systems for Photovoltaics (PV) installations: A critical review , 2013 .
[26] T. Kousksou,et al. Energy storage: Applications and challenges , 2014 .
[27] J. DeWaters,et al. Energy literacy among middle and high school youth , 2008, 2008 38th Annual Frontiers in Education Conference.
[28] Ning Gu,et al. Towards an integrated generative design framework , 2012 .
[29] Steven Beyerlein,et al. Review of district heating and cooling systems for a sustainable future , 2017 .
[30] Weimin Wang,et al. Applying multi-objective genetic algorithms in green building design optimization , 2005 .
[31] Luis C. Dias,et al. A multi-objective optimization model for building retrofit strategies using TRNSYS simulations, GenOpt and MATLAB , 2012 .
[32] Saeed Kamali,et al. Review of free cooling system using phase change material for building , 2014 .
[33] Ray Galvin,et al. Introducing the prebound effect: the gap between performance and actual energy consumption , 2012 .
[34] Appu Haapio,et al. Towards sustainable urban communities , 2012 .
[35] Saffa Riffat,et al. Phase change material developments: a review , 2015 .
[36] Ambrose Dodoo,et al. Life cycle primary energy use and carbon footprint of wood-frame conventional and passive houses with biomass-based energy supply , 2013 .
[37] Ayyoob Sharifi,et al. A critical review of seven selected neighborhood sustainability assessment tools , 2013 .
[38] Jungki Seo,et al. Application of PCM thermal energy storage system to reduce building energy consumption , 2012, Journal of Thermal Analysis and Calorimetry.
[39] António Samagaio,et al. Numerical Simulation of a PCM Shutter for Buildings Space Heating During the Winter , 2011 .
[40] Margaret Jollands,et al. Life cycle assessment and life cycle cost implication of residential buildings - A review , 2015 .
[41] S. C. Kaushik,et al. DEVELOPMENT OF PHASE CHANGE MATERIALS BASED MICROENCAPSULATED TECHNOLOGY FOR BUILDINGS: A REVIEW , 2011 .
[42] Nick Baker,et al. Energy and Environment in Architecture: A Technical Design Guide , 2000 .
[43] Sébastien Lasvaux,et al. NativeLCA - a systematic approach for the selection of environmental datasets as generic data: application to construction products in a national context , 2015, The International Journal of Life Cycle Assessment.
[44] Zia Ud Din,et al. Phase change material (PCM) storage for free cooling of buildings—A review , 2013 .
[45] A. Sharma,et al. Review on thermal energy storage with phase change materials and applications , 2009 .
[46] S. Sharples,et al. A comparative analysis of short-term and long-term thermal comfort surveys in Iran , 2002 .
[47] Jonas Allegrini,et al. A review of modelling approaches and tools for the simulation of district-scale energy systems , 2015 .
[48] Zhenjun Ma,et al. An optimal control strategy for complex building central chilled water systems for practical and real-time applications , 2009 .
[49] Alessandra Scognamiglio,et al. Design of Net Zero Energy Buildings: Feedback from international projects , 2014 .
[50] Wei-Mon Yan,et al. Study on thermal conductivity of water-based nanofluids with hybrid suspensions of CNTs/Al2O3 nanoparticles , 2015, Journal of Thermal Analysis and Calorimetry.
[51] R. Velraj,et al. Review of solar cooling methods and thermal storage options , 2011 .
[52] Guiyin Fang,et al. Preparation and heat transfer characteristics of microencapsulated phase change material slurry: A review , 2011 .
[53] Parfait Tatsidjodoung,et al. A review of potential materials for thermal energy storage in building applications , 2013 .
[54] Fausto Freire,et al. Environmental impact trade-offs in building envelope retrofit strategies , 2017, The International Journal of Life Cycle Assessment.
[55] Muhammad Abdul Mujeebu. Indoor Environmental Quality , 2019 .
[56] Enrico Benetto,et al. Life cycle assessment and data envelopment analysis approach for the selection of building components according to their environmental impact efficiency: a case study for external walls , 2015 .
[57] Fausto Freire,et al. Life-cycle assessment of a house with alternative exterior walls: Comparison of three impact assessment methods , 2012 .
[58] José M. Corberán,et al. Analysis and optimisation of different two-stage transcritical carbon dioxide cycles for heating applications , 2016 .
[59] Fausto Freire,et al. Integrated life-cycle assessment and thermal dynamic simulation of alternative scenarios for the roof retrofit of a house , 2014 .
[60] Frédéric Kuznik,et al. A review on phase change materials integrated in building walls , 2011 .
[61] Targo Kalamees,et al. Cost optimal and nearly zero (nZEB) energy performance calculations for residential buildings with R , 2011 .
[62] Liwu Fan,et al. Thermal conductivity enhancement of phase change materials for thermal energy storage: A review , 2011 .
[63] Luisa F. Cabeza,et al. Materials used as PCM in thermal energy storage in buildings: A review , 2011 .
[64] Lefteris Virirakis. GENETICA: A computer language that supports general formal expression with evolving data structures , 2003, IEEE Trans. Evol. Comput..
[65] Ralph Evins,et al. A review of computational optimisation methods applied to sustainable building design , 2013 .
[66] Brian Norton,et al. Evaluation of phase change materials for thermal regulation enhancement of building integrated photovoltaics , 2010 .
[67] Dan Zhou,et al. Review on thermal energy storage with phase change materials (PCMs) in building applications , 2012 .
[68] K. Krizek. Residential Relocation and Changes in Urban Travel: Does Neighborhood-Scale Urban Form Matter? , 2003 .
[69] T. M. Leung,et al. A review on Life Cycle Assessment, Life Cycle Energy Assessment and Life Cycle Carbon Emissions Assessment on buildings , 2015 .
[70] Pramod B. Salunkhe,et al. A review on effect of phase change material encapsulation on the thermal performance of a system , 2012 .
[71] R. K. Sharma,et al. Developments in organic solid–liquid phase change materials and their applications in thermal energy storage , 2015 .
[72] O. Ortíz-Rodriguez,et al. Life cycle assessment of two dwellings: one in Spain, a developed country, and one in Colombia, a country under development. , 2010, The Science of the total environment.
[73] Ambrose Dodoo,et al. Effect of thermal mass on life cycle primary energy balances of a concrete- and a wood-frame building , 2012 .
[74] Kristel de Myttenaere,et al. A comprehensive assessment of the life cycle energy demand of passive houses , 2013 .
[75] M. Chandrasekar,et al. A review on the thermal regulation techniques for non integrated flat PV modules mounted on building top , 2015 .
[76] Wei-Mon Yan,et al. Erratum to: Study on thermal conductivity of water-based nanofluids with hybrid suspensions of CNTs/Al2O3 nanoparticles , 2016, Journal of Thermal Analysis and Calorimetry.
[77] R. Compagnon. Solar and daylight availability in the urban fabric , 2004 .
[78] Eric Johnson. Handbook on Life Cycle Assessment Operational Guide to the ISO Standards , 2003 .
[79] James M. Calm,et al. The next generation of refrigerants – Historical review, considerations, and outlook , 2008 .
[80] Zhang Xu,et al. Inventory analysis of LCA on steel- and concrete-construction office buildings , 2008 .
[81] Robert Ries,et al. Comparative environmental life cycle assessment of green roofs , 2007 .
[82] Jacques Teller,et al. Towards sustainable neighbourhoods: a new handbook and its application , 2014 .
[83] Robert H. Crawford,et al. Impact of past and future residential housing development patterns on energy demand and related emissions , 2011 .
[84] Georgios Kokogiannakis,et al. Review of phase change emulsions (PCMEs) and their applications in HVAC systems , 2015 .
[85] C. H. Antunes,et al. Categorization of residential electricity consumption as a basis for the assessment of the impacts of demand response actions , 2014 .
[86] L. Cabeza,et al. Heat and cold storage with PCM: An up to date introduction into basics and applications , 2008 .
[87] Amar M. Khudhair,et al. A review on phase change energy storage: materials and applications , 2004 .
[88] Hongfa Di,et al. Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook , 2007 .
[89] Ravi Prakash,et al. Life cycle energy analysis of a residential building with different envelopes and climates in Indian context , 2012 .
[90] Luisa F. Cabeza,et al. Modeling phase change materials behavior in building applications: Comments on material characterization and model validation , 2012 .
[91] Margaret Jollands,et al. Life cycle assessment and life cycle cost implications of wall assemblages designs , 2014 .
[92] Sylvie Duvernoy,et al. Architecture’s New Media:Principles, Theories, and Methods of Computer-Aided Design , 2005 .
[93] Luísa Maria Dias Pereira,et al. Modernised Portuguese Schools - From IAQ and Thermal Comfort towards Energy Efficiency Plans , 2016 .
[94] English Version,et al. Sustainability of construction works - Assessment of environmental performance of buildings - Calculation method , 2010 .
[95] Luisa F. Cabeza,et al. Review on phase change materials (PCMs) for cold thermal energy storage applications , 2012 .
[96] Carlos Henggeler Antunes,et al. Energy behaviours as promoters of energy efficiency: A 21st century review , 2012 .
[97] Kari Alanne,et al. A multi-objective life cycle approach for optimal building design: A case study in Finnish context , 2017 .
[98] Kai Zhang,et al. Review of nanofluids for heat transfer applications , 2009 .
[99] Hongxing Yang,et al. Using phase change materials in photovoltaic systems for thermal regulation and electrical efficiency improvement: A review and outlook , 2015 .
[100] Gumersindo Verdú,et al. A review of refrigerant R1234ze(E) recent investigations , 2016 .
[101] John S. Gero,et al. Energy in context: A multicriteria model for building design , 1983 .
[102] Emmanuel Rey,et al. Review and critical analysis of early-design phase evaluation metrics for the solar potential of neighborhood designs , 2015 .
[103] Leif Gustavsson,et al. Life cycle primary energy use and carbon emission of an eight-storey wood-framed apartment building , 2010 .
[104] G. Domairry,et al. Experimental investigation of preparing and using the H2O based nanofluids in the heating process of HVAC system model , 2017 .
[105] Changying Zhao,et al. Review on microencapsulated phase change materials (MEPCMs): Fabrication, characterization and applications , 2011 .
[106] Maneesh Agrawala,et al. Interactive furniture layout using interior design guidelines , 2011, SIGGRAPH 2011.
[107] J. Darkwa,et al. Review of solid–liquid phase change materials and their encapsulation technologies , 2015 .
[108] Carlos Henggeler Antunes,et al. Estimating energy savings from behaviours using building performance simulations , 2017 .
[109] Somchai Wongwises,et al. Enhancement of heat transfer using nanofluids—An overview , 2010 .
[110] Daniela Belziti,et al. The French eco-neighbourhood evaluation model: Contributions to sustainable city making and to the evolution of urban practices. , 2016, Journal of environmental management.
[111] Jennifer Whyte. Towards a new craft of architecture , 2015 .
[112] Vítor Leal,et al. Envelope-related energy demand: A design indicator of energy performance for residential buildings in early design stages , 2013 .
[113] Parham A. Mirzaei,et al. A Review of District Heating Systems: Modeling and Optimization , 2016, Front. Built Environ..
[114] S. Kakaç,et al. Review of convective heat transfer enhancement with nanofluids , 2009 .
[115] Lei Cao,et al. Properties evaluation and applications of thermal energystorage materials in buildings , 2015 .
[116] K. Steemers. Energy and the city: density, buildings and transport , 2003 .
[117] Miguel Brito,et al. Modelling solar potential in the urban environment: State-of-the-art review , 2015 .
[118] Luis Pérez-Lombard,et al. A review of HVAC systems requirements in building energy regulations , 2011 .
[119] Gang Liu,et al. Solar potential in urban residential buildings , 2015 .
[120] Subrata Mondal,et al. Phase change materials for smart textiles – An overview , 2008 .
[121] Edmundas Kazimieras Zavadskas,et al. Multivariant design and multiple criteria analysis of building refurbishments , 2005 .
[122] John E. Anderson,et al. Energy analysis of the built environment—A review and outlook , 2015 .
[123] Simon Johannes Bley,et al. Smarter, greener, more inclusive? Indicators to support the Europe 2020 strategy - 2017 edition , 2017 .
[124] M. Filippini,et al. A new approach to measuring the rebound effect associated to energy efficiency improvements: An application to the US residential energy demand , 2015 .
[125] Shuli Liu,et al. Review on Heat Transfer Mechanisms and Characteristics in Encapsulated PCMs , 2015 .
[126] Johan Braet,et al. Life cycle assessment in the construction sector: A review , 2013 .
[127] Joshua D. Kneifel,et al. Life-cycle carbon and cost analysis of energy efficiency measures in new commercial buildings , 2010 .
[128] S. M. Sadrameli,et al. A review of microencapsulation methods of phase change materials (PCMs) as a thermal energy storage (TES) medium , 2014 .
[129] R. Velraj,et al. Review on free cooling of buildings using phase change materials , 2010 .
[130] Angelina H.M.E. Reinders,et al. Empowering the end-user in smart grids: Recommendations for the design of products and services , 2013 .
[131] Monjur Mourshed,et al. A critical review of environmental assessment tools for sustainable urban design , 2015 .
[132] I. Sârbu,et al. A review on substitution strategy of non-ecological refrigerants from vapour compression-based refrigeration, air-conditioning and heat pump systems , 2014 .
[133] Peter Lund,et al. Multivariate optimization of design trade-offs for solar low energy buildings , 1999 .
[134] W. Tao,et al. Fatty acids as phase change materials: A review , 2014 .
[135] José Dinis Silvestre,et al. From the new European Standards to an environmental, energy and economic assessment of building assemblies from cradle-to-cradle (3E-C2C) , 2013 .
[136] Stirling Howieson. Housing and Asthma , 2005 .
[137] Corinna Fischer. Feedback on household electricity consumption: a tool for saving energy? , 2008 .
[138] Arno Schlueter,et al. Integrated model for characterization of spatiotemporal building energy consumption patterns in neighborhoods and city districts , 2015 .
[139] G. Fang,et al. Preparation, thermal properties and applications of shape-stabilized thermal energy storage materials , 2014 .
[140] J. Darkwa,et al. Development of a novel phase change material emulsion for cooling systems , 2016 .
[141] C. Kennedy,et al. Comparing High and Low Residential Density: Life-Cycle Analysis of Energy Use and Greenhouse Gas Emissions , 2006 .
[142] Jon Sargent,et al. Solar zoning and energy in detached residential dwellings , 2011, SpringSim.
[143] Mohammed M. Farid,et al. A Review on Energy Conservation in Building Applications with Thermal Storage by Latent Heat Using Phase Change Materials , 2021, Thermal Energy Storage with Phase Change Materials.
[144] Jonathan Cagan,et al. Computer-Based Design Synthesis Research: An Overview , 2011, J. Comput. Inf. Sci. Eng..
[145] Françoise Thellier,et al. Impact of occupant's actions on energy building performance and thermal sensation , 2014 .
[146] Evangelos Grigoroudis,et al. A multi-objective decision model for the improvement of energy efficiency in buildings , 2010 .
[147] Jorma Railio,et al. REHVA nZEB technical definition and system boundaries for nearly zero energy buildings , 2013 .
[148] S. D. Pohekar,et al. Performance enhancement in latent heat thermal storage system: A review , 2009 .
[149] Arild Gustavsen,et al. Phase Change Materials for Building Applications: A State-of-the-Art Review , 2010 .
[150] Bjørn Petter Jelle,et al. Phase Change Materials and Products for Building Applications: A State-of-the-Art Review and Future Research Opportunities , 2015 .
[151] André Stephan,et al. Reducing the total life cycle energy demand of recent residential buildings in Lebanon , 2014 .
[152] Buick Davison,et al. An environmental impact comparison of external wall insulation types , 2015 .
[153] Enio Pedone Bandarra Filho,et al. Experimental evaluation of CNT nanofluids in single-phase flow , 2015 .
[154] Ambrose Dodoo,et al. Lifecycle primary energy analysis of low-energy timber building systems for multi-storey residential buildings , 2014 .
[155] Shabbir H. Gheewala,et al. Life cycle energy assessment of a typical office building in Thailand , 2009 .
[156] K. Sopian,et al. Review of solar air collectors with thermal storage units , 2011 .
[157] Shanti Pless,et al. Definition of a 'Zero Net Energy' Community , 2009 .
[158] Barbara Rossi,et al. Life-cycle assessment of residential buildings in three different European locations, basic tool , 2012 .
[159] Kamaruzzaman Sopian,et al. Review of thermal energy storage for air conditioning systems , 2012 .
[160] Zhiqiang Zhai,et al. Modeling phase change materials embedded in building enclosure: A review , 2013 .
[161] Fausto Freire,et al. Life-cycle energy and greenhouse gas analysis of three building types in a residential area in Lisbon , 2014 .
[162] Stirling Howieson. Are our homes making us ill? The impact of energy efficiency on indoor air quality , 2014, Perspectives in public health.
[163] R. Pacheco-Torres,et al. Towards successful environmental performance of sustainable cities: Intervening sectors. A review , 2016 .
[164] Luisa F. Cabeza,et al. Economic impact of integrating PCM as passive system in buildings using Fanger comfort model , 2016 .
[165] John Palmer,et al. Energy performance indoor environmental quality retrofit — a European diagnosis and decision making method for building refurbishment , 2000 .
[166] Monica Paciuk,et al. Improving energy performance of school buildings while ensuring indoor air quality ventilation , 2007 .
[167] William O'Brien,et al. Modelling, Design, and Optimization of Net-Zero Energy Buildings , 2015 .
[168] Edgar G. Hertwich,et al. Life cycle assessment of a single-family residence built to either conventional- or passive house standard , 2012 .
[169] Peng Xu,et al. Energy and behavioral impacts of integrative retrofits for residential buildings: What is at stake for building energy policy reforms in northern China? , 2013 .
[170] Ingvar Holmér,et al. Personal factors in thermal comfort assessment: clothing properties and metabolic heat production , 2002 .
[171] Paulo Santos,et al. Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency , 2013 .
[172] Francesco Castellani,et al. Life Cycle Assessment of a passive house in a seismic temperate zone , 2013 .
[173] Yaochu Jin,et al. A comprehensive survey of fitness approximation in evolutionary computation , 2005, Soft Comput..
[174] William J. Mitchell,et al. Techniques of automated design in architecture: A survey and evaluation , 1975 .
[175] Christian Inard,et al. Short-term storage systems of thermal energy for buildings: a review , 2013 .
[176] Xin Wang,et al. Energy-Efficient Building Envelopes with Phase-Change Materials: New Understanding and Related Research , 2014 .
[177] Mei Zhao,et al. Methods and tools for community energy planning: A review , 2015 .
[178] P. Torcellini,et al. Zero Energy Buildings: A Critical Look at the Definition; Preprint , 2006 .
[179] Paris A. Fokaides,et al. European smart cities: The role of zero energy buildings , 2015 .
[180] Geert Deconinck,et al. Demand response flexibility and flexibility potential of residential smart appliances: Experiences from large pilot test in Belgium , 2015 .
[181] D. Fernandes,et al. Thermal energy storage: “How previous findings determine current research priorities” , 2012 .
[182] Bjarne W. Olesen,et al. Indoor Climate Quality Assessment , 2011 .
[183] Ravikanth S. Vajjha,et al. Application of nanofluids in heating buildings and reducing pollution , 2009 .
[184] L. Gustavsson,et al. Life cycle primary energy analysis of residential buildings , 2010 .
[185] Paulo Santos,et al. A macro-component approach for the assessment of building sustainability in early stages of design , 2014 .
[186] J. Virgone,et al. Design of buildings shape and energetic consumption , 2001 .
[187] Christoph F. Reinhart,et al. Urban building energy modeling – A review of a nascent field , 2015 .
[188] André De Herde,et al. Impacts of occupant behaviours on residential heating consumption for detached houses in a temperate climate in the northern part of Europe , 2013 .
[189] Graeme Maidment,et al. The novel use of phase change materials in refrigeration plant. Part 2: Dynamic simulation model for the combined system , 2007 .
[190] Sunil Kumar Singal,et al. Review of mathematical modeling on latent heat thermal energy storage systems using phase-change material , 2008 .
[191] Fausto Freire,et al. Comparative life-cycle energy analysis of a new and an existing house: The significance of occupant’s habits, building systems and embodied energy , 2016 .
[192] Joao P. Trovao,et al. Integration of the Electric Vehicle as a Manageable Load in a Residential Energy Management System , 2015, 2015 IEEE Vehicle Power and Propulsion Conference (VPPC).
[193] Manuel Gameiro da Silva,et al. Indoor Air Quality and Thermal Comfort Assessment of Two Portuguese Secondary Schools: Main Results , 2014 .
[194] Inês L. Azevedo,et al. Estimating direct and indirect rebound effects for U.S. households with input-output analysis. Part 2: Simulation , 2013 .
[195] Małgorzata Jurkowska,et al. Review on properties of microencapsulated phase change materials slurries (mPCMS) , 2016 .
[196] Maria Teresa Lucarelli,et al. Gli edifici scolastici e l’indoor air quality: procedure diagnostiche e criteri di intervento , 2015 .
[197] Luisa F. Cabeza,et al. Unconventional experimental technologies available for phase change materials (PCM) characterization. Part 1. Thermophysical properties , 2015 .
[198] Kathryn B. Janda,et al. Buildings don't use energy: people do , 2011 .
[199] Ala Hasan,et al. Applying a multi-objective optimization approach for Design of low-emission cost-effective dwellings , 2011 .
[200] Marc A. Rosen,et al. District heating and cooling: Review of technology and potential enhancements , 2012 .
[201] Ehsan Firouzfar,et al. Energy saving in HVAC systems using nanofluid , 2011 .
[202] Ambrose Dodoo,et al. Lifecycle carbon implications of conventional and low-energy multi-storey timber building systems , 2014 .
[203] Roberto Lollini,et al. Nearly Zero, Net Zero, and Plus Energy Buildings – Theory, Terminology, Tools, and Examples , 2013 .
[204] Som S Shrestha,et al. A protocol for lifetime energy and environmental impact assessment of building insulation materials , 2014 .
[205] Badea Nicolae,et al. Life cycle analysis in refurbishment of the buildings as intervention practices in energy saving , 2015 .
[206] Manuel Gameiro da Silva,et al. An integrated approach on energy consumption and indoor environmental quality performance in six Portuguese secondary schools , 2017 .
[207] Ruzhu Wang,et al. A review on phase change cold storage in air-conditioning system: Materials and applications , 2013 .
[208] Omar S. Asfour,et al. Effect of housing density on energy efficiency of buildings located in hot climates , 2015 .
[209] Francis Agyenim,et al. A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS) , 2010 .
[210] Eugénio Rodrigues,et al. An approach to the multi-level space allocation problem in architecture using a hybrid evolutionary technique , 2013 .
[211] Jonathan A. Wright,et al. Multi-objective optimization of cellular fenestration by an evolutionary algorithm , 2014 .
[212] Hugo Hens,et al. Life cycle inventory of buildings: A contribution analysis , 2010 .
[213] Kristel de Myttenaere,et al. Multi-scale life cycle energy analysis of a low-density suburban neighbourhood in Melbourne, Australia , 2013 .
[214] S. Jayaraj,et al. Environment friendly alternatives to halogenated refrigerants—A review , 2009 .
[215] Marjorie Musy,et al. Simulation tools to assess microclimate and building energy – A case study on the design of a new district , 2016 .
[216] Derek Clements-Croome,et al. Ventilation rates in schools and pupils' performance , 2012 .
[217] Zs. Bakó-Birób,et al. Ventilation rates in schools and pupils performance , 2011 .
[218] Yongjun Sun,et al. Recent Developments in HVAC System Control and Building Demand Management , 2017 .
[219] Luis C. Dias,et al. State of the Art on Retrofit Strategies Selection Using Multi-objective Optimization and Genetic Algorithms , 2013 .
[220] Lavinia Socaciu,et al. Thermal Energy Storage with Phase Change Material , 2012 .
[221] Ray Galvin,et al. Making the ‘rebound effect’ more useful for performance evaluation of thermal retrofits of existing homes: Defining the ‘energy savings deficit’ and the ‘energy performance gap’ , 2014 .
[222] Seppo Junnila,et al. A Carbon Consumption Comparison of Rural and Urban Lifestyles , 2011 .
[223] A. Malkawi,et al. Optimizing building form for energy performance based on hierarchical geometry relation , 2009 .
[224] S. Kalaiselvam,et al. Sustainable thermal energy storage technologies for buildings: A review , 2012 .
[225] Khamid Mahkamov,et al. Solar energy storage using phase change materials , 2007 .
[226] Yuan Wang,et al. Green building evaluation from a life-cycle perspective in Australia: A critical review , 2017 .
[227] Romeu Vicente,et al. Numerical evaluation of a phase change material–shutter using solar energy for winter nighttime indoor heating , 2014 .
[228] Ray Galvin,et al. Estimating broad-brush rebound effects for household energy consumption in the EU 28 countries and Norway: some policy implications of Odyssee data , 2014 .
[229] Kristel de Myttenaere,et al. Towards a comprehensive life cycle energy analysis framework for residential buildings , 2012 .
[230] Xianxu Hu,et al. Novel insight and numerical analysis of convective heat transfer enhancement with microencapsulated phase change material slurries: laminar flow in a circular tube with constant heat flux , 2002 .
[231] Pawel Wargocki,et al. The Effects of Outdoor Air Supply Rate and Supply Air Filter Condition in Classrooms on the Performance of Schoolwork by Children (RP-1257) , 2007 .
[232] Matti Jantunen,et al. Promoting actions for healthy indoor air (IAIAQ) , 2011 .
[233] Álvaro Gomes,et al. Integrated Management of Energy Resources in the Residential Sector Using Evolutionary Computation: A Review , 2015 .
[234] Javier Neila,et al. Applications of Phase Change Material in highly energy-efficient houses , 2012 .
[235] Tim Grant,et al. Quantifying the greenhouse benefits of the use of wood products in two popular house designs in Sydney, Australia , 2013, The International Journal of Life Cycle Assessment.
[236] Eike Musall,et al. Zero Energy Building A review of definitions and calculation methodologies , 2011 .
[237] Per Heiselberg,et al. Review of thermal energy storage technologies based on PCM application in buildings , 2013 .
[238] Agis M. Papadopoulos,et al. Environmental performance evaluation of thermal insulation materials and its impact on the building , 2007 .
[239] Michal Kraus. INDOOR AIR QUALITY ANALYSIS OF RESIDENTIAL BUILDINGS , 2017 .
[240] Mark S. Fox,et al. Spatial synthesis by disjunctive constraint satisfaction , 1997, Artificial Intelligence for Engineering Design, Analysis and Manufacturing.
[241] Paul Fazio,et al. Solar optimized residential neighborhoods: Evaluation and design methodology , 2013 .
[242] Karsten Voss,et al. Net zero energy buildings: A consistent definition framework , 2012 .
[243] Jiming Chen,et al. A Survey on Demand Response in Smart Grids: Mathematical Models and Approaches , 2015, IEEE Transactions on Industrial Informatics.
[244] Pierre Villon,et al. Urban layout optimization framework to maximize direct solar irradiation , 2015, Comput. Environ. Urban Syst..
[245] Uniben Yao Ayikoe Tettey,et al. Effects of different insulation materials on primary energy and CO2 emission of a multi-storey residential building , 2014 .
[246] Paulo Santos,et al. Multi-dimensional optimization of the incorporation of PCM-drywalls in lightweight steel-framed residential buildings in different climates , 2014 .
[247] Abhijit Date,et al. In Press) A new house wall system for residential buildings , 2013 .
[248] Jan Carmeliet,et al. Brick Cavity Walls: A Performance Analysis Based on Measurements and Simulations , 2007 .
[249] Aris Tsangrassoulis,et al. Algorithms for optimization of building design: A review , 2014 .
[250] Gongsheng Huang,et al. Multiplexed real-time optimization of HVAC systems with enhanced control stability , 2017 .
[251] Jianlei Niu,et al. Heat transfer characteristics of microencapsulated phase change material slurry in laminar flow under constant heat flux , 2009 .
[252] K. Pielichowski,et al. Phase change materials for thermal energy storage , 2014 .
[253] P. Chandrasekaran,et al. Role of PCM based nanofluids for energy efficient cool thermal storage system , 2013 .
[254] L. Norford,et al. The urban weather generator , 2013 .
[255] Carlos Alberto Conceição António,et al. Optimal topology of urban buildings for maximization of annual solar irradiation availability using a genetic algorithm , 2014 .
[256] Michael H. Mazor,et al. Life Cycle Greenhouse Gas Emissions Reduction From Rigid Thermal Insulation Use in Buildings , 2011 .
[257] Martin Tenpierik,et al. Review of the impact of urban block form on thermal performance, solar access and ventilation , 2014 .
[258] C. Doetsch,et al. State of the art on phase change material slurries , 2013 .
[259] Maria Wall,et al. The impact of urban design decisions on net zero energy solar buildings in Sweden , 2014 .
[260] Na Zhu,et al. Dynamic characteristics and energy performance of buildings using phase change materials: A review , 2009 .
[261] Michael Duncan,et al. 'Which Reduces Vehicle Travel More: Jobs-Housing Balance or Retail-Housing Mixing? , 2006 .
[262] Yvan Dutil,et al. A review on phase-change materials: Mathematical modeling and simulations , 2011 .
[263] Seppo Junnila,et al. Residential energy consumption patterns and the overall housing energy requirements of urban and rural households in Finland , 2014 .
[264] R. Velraj,et al. Phase change material-based building architecture for thermal management in residential and commercial establishments , 2008 .
[265] Adisa Azapagic,et al. Environmental impacts of the UK residential sector: Life cycle assessment of houses , 2012 .
[266] S. C. Solanki,et al. Heat transfer characteristics of thermal energy storage system using PCM capsules: A review , 2008 .
[267] Eugénio Rodrigues,et al. How reliable are geometry-based building indices as thermal performance indicators? , 2015 .
[268] K. Steemers,et al. Solar energy and urban morphology: Scenarios for increasing the renewable energy potential of neighbourhoods in London , 2015 .
[269] Luisa F. Cabeza,et al. Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .
[270] Changying Zhao,et al. A review of solar collectors and thermal energy storage in solar thermal applications , 2013 .
[271] Jing Liu,et al. Low melting point liquid metal as a new class of phase change material: An emerging frontier in energy area , 2013 .
[272] Daniel Castro-Lacouture,et al. GA-based decision support system for housing condition assessment and refurbishment strategies , 2009 .
[273] Evangelos Grigoroudis,et al. Towards a multi-objective optimization approach for improving energy efficiency in buildings , 2008 .
[274] Omar Khattab,et al. Occupants’ behavior and activity patterns influencing the energy consumption in the Kuwaiti residences , 2003 .
[275] Eugénio Rodrigues,et al. Automated approach for design generation and thermal assessment of alternative floor plans , 2014 .
[276] Christoph F. Reinhart,et al. UMI - AN URBAN SIMULATION ENVIRONMENT FOR BUILDING , 2013 .
[277] Fariborz Haghighat,et al. Multiobjective optimization of building design using TRNSYS simulations, genetic algorithm, and Artificial Neural Network , 2010 .
[278] Emmanuel Rey,et al. Office building retrofitting strategies: multicriteria approach of an architectural and technical issue , 2004 .
[279] M. K. Rathod,et al. Thermal stability of phase change materials used in latent heat energy storage systems: A review , 2013 .
[280] K. Sopian,et al. Review of the application of phase change material for heating and domestic hot water systems , 2015 .
[281] Lei Wang,et al. Review on thermal management systems using phase change materials for electronic components, Li-ion batteries and photovoltaic modules , 2014 .
[282] Mónica Delgado,et al. Review on phase change material emulsions and microencapsulated phase change material slurries: Materials, heat transfer studies and applications , 2012 .
[283] A. Melikov,et al. Indoor Climate Quality Assessment -: Evaluation of indoor thermal and indoor air quality , 2011 .
[284] Nazanin Nasrollahi,et al. Daylight illuminance in urban environments for visual comfort and energy performance , 2016 .
[285] Stephen Pullen,et al. Transport, Housing and Urban Form: The Life Cycle Energy Consumption and Emissions of City Centre Apartments Compared with Suburban Dwellings , 2009 .
[286] Binjiao Chen,et al. An experimental study of convective heat transfer with microencapsulated phase change material suspension: Laminar flow in a circular tube under constant heat flux , 2008 .
[287] Shazim Ali Memon,et al. Phase change materials integrated in building walls: A state of the art review , 2014 .
[288] Mark Schneider,et al. Do School Facilities Affect Academic Outcomes , 2002 .
[289] Claude-Alain Roulet,et al. Elaboration of retrofit scenarios , 2002 .
[290] D. Assouline,et al. Effects of urban compactness on solar energy potential , 2016 .
[291] Fausto Freire,et al. Significance of mobility in the life-cycle assessment of buildings , 2016 .
[292] Michael F Blackhurst,et al. Energy savings and the rebound effect with multiple energy services and efficiency correlation , 2014 .
[293] Anikó Ekárt,et al. Genetic algorithms in computer aided design , 2003, Comput. Aided Des..
[294] Norbert Müller,et al. A comparative study of water as a refrigerant with some current refrigerants , 2005 .
[295] José M. Corberán,et al. Evaluation of different heat pump systems for sanitary hot water production using natural refrigerants , 2017 .
[296] C. Ratti,et al. Energy consumption and urban texture , 2005 .
[297] N. Kochhar,et al. Ventilation Rates in Schools and Learning Performance , 2007 .
[298] Edmundas Kazimieras Zavadskas,et al. Importance of occupancy information when simulating energy demand of energy efficient house: A case study , 2015 .
[299] Álvaro Gomes,et al. Simulation‐based assessment of electric load management programs , 1999 .
[300] Rivka Oxman,et al. Performance-Based Design: Current Practices and Research Issues , 2008 .
[301] David Oliver. Phase-change materials for thermal energy storage , 2015 .
[302] Saffa Riffat,et al. A review of PCM technology for thermal energy storage in the built environment: Part I , 2013 .
[303] Siddig Omer,et al. Advancements in hybrid photovoltaic systems for enhanced solar cells performance , 2015 .
[304] Kristina Shea,et al. Towards integrated performance-driven generative design tools , 2004 .
[305] Giovanni Andrea Blengini,et al. The changing role of life cycle phases, subsystems and materials in the LCA of low energy buildings , 2010 .
[306] Dominique Derome,et al. Using life cycle assessment to derive an environmental index for light-frame wood wall assemblies , 2010 .
[307] Peter E.D. Love,et al. Analysing the life-cycle energy of an Australian residential building and its householders , 2000 .
[308] Vítor Leal,et al. Building envelope shape design in early stages of the design process: Integrating architectural design systems and energy simulation , 2013 .
[309] Fariborz Haghighat,et al. Thermal energy storage with phase change material—A state-of-the art review , 2014 .
[310] Sigrid Reiter,et al. A simplified framework to assess the feasibility of zero-energy at the neighbourhood/community scale , 2014 .
[311] Patrícia P. Silva,et al. Energy Efficiency of Higher Education Buildings: A Case Study. , 2015 .
[312] Luis C. Dias,et al. Multi-objective optimization for building retrofit strategies: A model and an application , 2012 .
[313] Hugo Hens,et al. Life Cycle Optimization of Extremely Low Energy Dwellings , 2007 .
[314] Tarik Kousksou,et al. Exergy based performance evaluation of latent heat thermal storage system: A review , 2010 .
[315] Paulo Santos,et al. Experimental evaluation of the heat transfer through small PCM-based thermal energy storage units for building applications , 2016 .
[316] Jamie Meil,et al. Prospects for carbon-neutral housing: the influence of greater wood use on the carbon footprint of a single-family residence , 2009 .
[317] Leslie K. Norford,et al. A design optimization tool based on a genetic algorithm , 2002 .
[318] J. Healy,et al. Excess winter mortality in Europe: a cross country analysis identifying key risk factors , 2003, Journal of epidemiology and community health.
[319] Massimiliano Manfren,et al. Building Automation and Control Systems and performance optimization: A framework for analysis , 2017 .
[320] Gregory A. Keoleian,et al. Life cycle energy and environmental performance of a new university building: modeling challenges and design implications , 2003 .
[321] Bill Bordass,et al. Making feedback and post-occupancy evaluation routine 2: Soft landings – involving design and building teams in improving performance , 2005 .
[322] Yi-Hsuan Hung,et al. Assessment of heat dissipation performance for nanofluid , 2012 .
[323] P. Rickwood,et al. Urban Structure and Energy—A Review , 2008 .
[324] John Holmberg,et al. Quantifying the rebound effects of energy efficiency improvements and energy conserving behaviour in Sweden , 2009 .
[325] Subbu Sethuvenkatraman,et al. A review of thermal energy storage technologies and control approaches for solar cooling , 2015 .
[326] Luisa F. Cabeza,et al. Life cycle assessment (LCA) and life cycle energy analysis (LCEA) of buildings and the building sector: A review , 2014 .
[327] Shabbir H. Gheewala,et al. A decision making matrix with life cycle perspective of materials for roofs in Sri Lanka , 2007 .
[328] Antonio García-Martínez,et al. Life cycle assessment (LCA) of building refurbishment: A literature review , 2017 .
[329] V. V. Tyagi,et al. PCM thermal storage in buildings: A state of art , 2007 .
[330] Luisa Caldas,et al. Generation of energy-efficient architecture solutions applying GENE_ARCH: An evolution-based generative design system , 2008, Adv. Eng. Informatics.
[331] Paul Fazio,et al. Evaluation of energy supply and demand in solar neighborhood , 2012 .
[332] Manuel Gameiro da Silva,et al. Assessment of indoor air quality and thermal comfort in Portuguese secondary classrooms: Methodology and results , 2014 .
[333] Nasrudin Abd Rahim,et al. Review of PCM based cooling technologies for buildings , 2012 .
[334] Kamaruzzaman Sopian,et al. CFD applications for latent heat thermal energy storage: a review , 2013 .
[335] Ambrose Dodoo,et al. Life cycle primary energy implication of retrofitting a wood-framed apartment building to passive house standard , 2010 .
[336] Eugénio Rodrigues,et al. Improving thermal performance of automatically generated floor plans using a geometric variable sequential optimization procedure , 2014 .
[337] Bhupendra K. Gandhi,et al. Hydraulic performance and erosive wear of centrifugal slurry pumps - A review , 2017 .
[338] José Pinto Duarte,et al. A Discursive Grammar for Customizing Mass Housing - The case of Siza´s houses at Malagueira , 2005, eCAADe proceedings.
[339] Jlm Jan Hensen,et al. Development of surrogate models using artificial neural network for building shell energy labelling , 2014 .
[340] Koen Vanthournout,et al. An automated residential demand response pilot experiment, based on day-ahead dynamic pricing , 2015 .
[341] Elisabeth Dütschke,et al. A Brighter Future? Quantifying the Rebound Effect in Energy Efficient Lighting , 2014 .
[342] Yekang Ko,et al. Socio-technical evolution of Decentralized Energy Systems: A critical review and implications for urban planning and policy , 2016 .
[343] Paulo Carvalho,et al. Influence of weather and indoor climate on clothing of occupants in naturally ventilated school buildings , 2013 .
[344] Yehuda E. Kalay,et al. Performance-based design , 1999 .
[345] Paulo Santos,et al. Experimental study of the heat transfer through a vertical stack of rectangular cavities filled with phase change materials , 2015 .
[346] Fausto Freire,et al. Environmental Life-Cycle Impacts of a Single-family House in Portugal: Assessing Alternative Exterior Walls with two Methods , 2011 .
[347] José Manuel Cejudo López,et al. A decision-making LCA for energy refurbishment of buildings: Conditions of comfort , 2014 .
[348] N. Soares,et al. Thermal energy storage with phase change materials (PCMs) for the improvement of the energy performance of buildings , 2016 .
[349] João Dias Carrilho,et al. Towards sustainable, energy-efficient and healthy ventilation strategies in buildings: A review , 2016 .
[350] H. Takebayashi,et al. Study to examine the potential for solar energy utilization based on the relationship between urban morphology and solar radiation gain on building rooftops and wall surfaces , 2015 .
[351] Kristel de Myttenaere,et al. Towards a more holistic approach to reducing the energy demand of dwellings , 2011 .