Creating anti-viral high-touch surfaces using photocatalytic transparent films.

Antimicrobial and self-cleaning surface coatings are promising tools to combat the growing global threat of infectious diseases and related healthcare-associated infections (HAIs). Although many engineered TiO2-based coating technologies are reporting antibacterial performance, the antiviral performance of these coatings has not been explored. Furthermore, previous studies have underscored the importance of the "transparency" of the coating for surfaces such as the touch screens of medical devices. Hence, in this study, we fabricated a variety of nanoscale TiO2-based transparent thin films (anatase TiO2, anatase/rutile mixed phase TiO2, silver-anatase TiO2 composite, and carbon nanotube-anatase TiO2 composite) via dipping and airbrush spray coating technologies and evaluated their antiviral performance (Bacteriophage MS2 as the model) under dark and illuminated conditions. The thin films showed high surface coverage (ranging from 40 to 85%), low surface roughness (maximum average roughness 70 nm), super-hydrophilicity (water contact angle 6-38.4°), and high transparency (70-80% transmittance under visible light). Antiviral performance of the coatings revealed that silver-anatase TiO2 composite (nAg/nTiO2) coated samples achieved the highest antiviral efficacy (5-6 log reduction) while the other TiO2 coated samples showed fair antiviral results (1.5-3.5 log reduction) after 90 min LED irradiation at 365 nm. Those findings indicate that TiO2-based composite coatings are effective in creating antiviral high-touch surfaces with the potential to control infectious diseases and HAIs.

[1]  M. Sagir,et al.  Spinach-derived boron-doped g-C3N4/TiO2 composites for efficient photo-degradation of methylene blue (MB) dye. , 2023, Chemosphere.

[2]  Kirtiraj K. Gaikwad,et al.  Bio-based materials for barrier coatings on paper packaging , 2022, Biomass conversion and biorefinery.

[3]  L. Poon,et al.  Transparent Anti-SARS-CoV-2 and Antibacterial Silver Oxide Coatings , 2022, ACS applied materials & interfaces.

[4]  T. Gyulavári,et al.  Immobilization of highly active titanium dioxide and zinc oxide hollow spheres on ceramic paper and their applicability for photocatalytic water treatment , 2022, Journal of Photochemistry and Photobiology A: Chemistry.

[5]  A. Cabral,et al.  Cotton Fabrics Decorated with Antimicrobial Ag-Coated TiO2 Nanoparticles Are Unable to Fully and Rapidly Eradicate SARS-CoV-2 , 2021, ACS applied nano materials.

[6]  L. Poon,et al.  Transparent and Sprayable Surface Coatings that Kill Drug-Resistant Bacteria Within Minutes and Inactivate SARS-CoV-2 Virus , 2021, ACS applied materials & interfaces.

[7]  K. Gray,et al.  The key to maximizing the benefits of antimicrobial and self-cleaning coatings is to fully determine their risks , 2021, Current opinion in chemical engineering.

[8]  V. Rodríguez-González,et al.  Photocatalytic TiO2 thin films and coatings prepared by sol–gel processing: a brief review , 2021, Journal of Sol-Gel Science and Technology.

[9]  Gabrielle M. String,et al.  Selection of a SARS-CoV-2 Surrogate for Use in Surface Disinfection Efficacy Studies with Chlorine and Antimicrobial Surfaces , 2021, Environmental science & technology letters.

[10]  F. Fraternali,et al.  Rapid inactivation of SARS-CoV-2 by titanium dioxide surface coating , 2021, Wellcome open research.

[11]  A. Turak,et al.  Antiviral nanoparticles for sanitizing surfaces: A roadmap to self-sterilizing against COVID-19 , 2021, Nano Today.

[12]  Anjalu Ramchiary,et al.  Evaluation of Ag@TiO2/WO3 heterojunction photocatalyst for enhanced photocatalytic activity towards methylene blue degradation. , 2021, Chemosphere.

[13]  S. Parapini,et al.  Oxidative Inactivation of SARS-CoV-2 on Photoactive AgNPs@TiO2 Ceramic Tiles , 2021, International journal of molecular sciences.

[14]  R. O’Toole.  The interface between COVID-19 and bacterial healthcare-associated infections , 2021, Clinical Microbiology and Infection.

[15]  P. Rakowska,et al.  Antiviral surfaces and coatings and their mechanisms of action , 2021, Communications Materials.

[16]  G. Fongaro,et al.  Trends in the Antiviral Chemical Activity of Material Surfaces Associated With the SARS-CoV-2 Outbreak , 2021, Frontiers in Chemical Engineering.

[17]  G. Hwang,et al.  Implication of Surface Properties, Bacterial Motility, and Hydrodynamic Conditions on Bacterial Surface Sensing and Their Initial Adhesion , 2021, Frontiers in Bioengineering and Biotechnology.

[18]  D. Lewis.  COVID-19 rarely spreads through surfaces. So why are we still deep cleaning? , 2021, Nature.

[19]  T. Didar,et al.  Antimicrobial Nanomaterials and Coatings: Current Mechanisms and Future Perspectives to Control the Spread of Viruses Including SARS-CoV-2 , 2020, ACS nano.

[20]  Felipe García,et al.  Incidence of co-infections and superinfections in hospitalized patients with COVID-19: a retrospective cohort study , 2020, Clinical Microbiology and Infection.

[21]  D. MacFadden,et al.  Bacterial co-infection and secondary infection in patients with COVID-19: a living rapid review and meta-analysis , 2020, Clinical Microbiology and Infection.

[22]  J. O’Grady,et al.  Co-infections: potentially lethal and unexplored in COVID-19 , 2020, The Lancet Microbe.

[23]  Utsav Raj,et al.  Covid-19 and mobile phone hygiene in healthcare settings , 2020, BMJ Global Health.

[24]  L. Poon,et al.  Stability of SARS-CoV-2 in different environmental conditions , 2020, The Lancet Microbe.

[25]  Kun Chen,et al.  Incorporation of functionalized carbon nanotubes into hydrophobic drug crystals for enhancing aqueous dissolution. , 2019, Colloids and surfaces. B, Biointerfaces.

[26]  T. Luxbacher,et al.  MS2 bacteriophage inactivation using a N-doped TiO2-coated photocatalytic membrane reactor: Influence of water-quality parameters , 2018, Chemical Engineering Journal.

[27]  M. Toborek,et al.  Effects of coating materials on antibacterial properties of industrial and sunscreen-derived titanium-dioxide nanoparticles on Escherichia coli. , 2018, Chemosphere.

[28]  K. Gray,et al.  TiO2-based transparent coatings create self-cleaning surfaces. , 2018, Chemosphere.

[29]  H. Olmez,et al.  Surface modifications for antimicrobial effects in the healthcare setting: a critical overview. , 2018, The Journal of hospital infection.

[30]  M. Goiato,et al.  In vitro evaluation of microbial adhesion on the different surface roughness of acrylic resin specific for ocular prosthesis , 2018, European Journal of Dentistry.

[31]  H. Ding,et al.  The Preparation of TiO2 Film by the Sol-Gel Method and Evaluation of Its Self-Cleaning Property , 2018, Materials.

[32]  K. Gray,et al.  Synergistic Bacterial Stress Results from Exposure to Nano-Ag and Nano-TiO2 Mixtures under Light in Environmental Media. , 2018, Environmental science & technology.

[33]  I. Fratoddi.  Hydrophobic and Hydrophilic Au and Ag Nanoparticles. Breakthroughs and Perspectives , 2017, Nanomaterials.

[34]  Ki‐Hyun Kim,et al.  TiO2‐based photocatalytic disinfection of microbes in aqueous media: A review , 2017, Environmental research.

[35]  Jinju Chen,et al.  Influence of surface roughness on the initial formation of biofilm , 2015 .

[36]  Justin M. Notestein,et al.  Size-Selective Synthesis and Stabilization of Small Silver Nanoparticles on TiO2 Partially Masked by SiO2 , 2015 .

[37]  M. Batzill,et al.  Why is anatase a better photocatalyst than rutile? - Model studies on epitaxial TiO2 films , 2014, Scientific Reports.

[38]  Jean-François Gaillard,et al.  Cytotoxicity of commercial nano-TiO2 to Escherichia coli assessed by high-throughput screening: effects of environmental factors. , 2013, Water research.

[39]  H. E. Çamurlu,et al.  Sol-gel thin films with anti-reflective and self-cleaning properties , 2012, Chemické zvesti.

[40]  K. Tsai,et al.  Effectiveness and Limitations of Hand Hygiene Promotion on Decreasing Healthcare–Associated Infections , 2011, PloS one.

[41]  Richard M. Lueptow,et al.  Single-walled carbon nanotube-facilitated dispersion of particulate TiO2 on ZrO2 ceramic membrane filters. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[42]  Richard M. Lueptow,et al.  Photoreactive TiO2/carbon nanotube composites: synthesis and reactivity. , 2008, Environmental science & technology.

[43]  J. Georgiadis,et al.  Science and technology for water purification in the coming decades , 2008, Nature.

[44]  Carsten Rockstuhl,et al.  A plasmonic photocatalyst consisting of silver nanoparticles embedded in titanium dioxide. , 2008, Journal of the American Chemical Society.

[45]  K. Gray,et al.  The solid–solid interface: Explaining the high and unique photocatalytic reactivity of TiO2-based nanocomposite materials , 2007 .

[46]  A. R. Cestari,et al.  Kinetic and calorimetric study of the adsorption of dyes on mesoporous activated carbon prepared from coconut coir dust. , 2006, Journal of colloid and interface science.

[47]  S. Bilgili,et al.  Sanitary/hygienic processing equipment design , 2006 .

[48]  Liang Hong,et al.  Sol gel derived photocatalytic porous TiO2 thin films , 2005 .

[49]  C. O’Connell,et al.  Bacteriophage MS2: molecular weight and spatial distribution of the protein and RNA components by small-angle neutron scattering and virus counting. , 2003, Structure.

[50]  Kimberly A. Gray,et al.  Explaining the Enhanced Photocatalytic Activity of Degussa P25 Mixed-Phase TiO2 Using EPR , 2003 .

[51]  Jae‐Hyun Kim,et al.  Ultrasonic spray pyrolysis synthesis of reduced graphene oxide/anatase TiO2 composite and its application in the photocatalytic degradation of methylene blue in water. , 2018, Chemosphere.

[52]  R. Shaffer,et al.  MS2 Coliphage as a Surrogate for 2009 Pandemic Influenza A (H1N1) Virus (pH1N1) in Surface Survival Studies on N95 Filtering Facepiece Respirators. , 2014, Journal of the International Society for Respiratory Protection.