Multi-Island Genetic-Algorithm-Based Approach to Uniquely Calibrate Polycrystal Plasticity Models for Magnesium Alloys

[1]  Hao Lu,et al.  A Novel Method Based on Multi-Island Genetic Algorithm Improved Variational Mode Decomposition and Multi-Features for Fault Diagnosis of Rolling Bearing , 2020, Entropy.

[2]  X. Mao,et al.  Twinning and detwinning behaviors of commercially pure titanium sheets , 2019, International Journal of Plasticity.

[3]  B. Zhang,et al.  Investigation of the In-Plane Mechanical Anisotropy of Magnesium Alloy AZ31B-O by VPSC–TDT Crystal Plasticity Model , 2019, Materials.

[4]  Ying-hong Peng,et al.  Strain rate sensitivities of deformation mechanisms in magnesium alloys , 2018 .

[5]  R. Mccabe,et al.  Experimentally quantifying critical stresses associated with basal slip and twinning in magnesium using micropillars , 2017 .

[6]  S. Agnew,et al.  Twin-induced hardening in extruded Mg alloy AM30 , 2017 .

[7]  S. Agnew,et al.  Modeling twinning and detwinning behavior of Mg alloy ZK60A during monotonic and cyclic loading , 2015 .

[8]  M. Worswick,et al.  Constitutive Behavior of Commercial Grade ZEK100 Magnesium Alloy Sheet over a Wide Range of Strain Rates , 2014, Metallurgical and Materials Transactions A.

[9]  U. Ramamurty,et al.  Micropillar and macropillar compression responses of magnesium single crystals oriented for single slip or extension twinning , 2014 .

[10]  Jian Wang,et al.  A crystal plasticity model for hexagonal close packed (HCP) crystals including twinning and de-twinning mechanisms , 2013 .

[11]  A. Minor,et al.  Reducing deformation anisotropy to achieve ultrahigh strength and ductility in Mg at the nanoscale , 2013, Proceedings of the National Academy of Sciences.

[12]  K. T. Ramesh,et al.  Effects of the initial dislocation density on size effects in single-crystal magnesium , 2013 .

[13]  C. Tomé,et al.  Studying the effect of stress relaxation and creep on lattice strain evolution of stainless steel under tension , 2013 .

[14]  Jian Wang,et al.  Study of lattice strains in magnesium alloy AZ31 based on a large strain elastic-viscoplastic self-consistent polycrystal model , 2012 .

[15]  M. Daymond,et al.  On the determination of single-crystal plasticity parameters by diffraction: optimization of a polycrystalline plasticity model using a genetic algorithm , 2012 .

[16]  J. Jonas,et al.  Effect of dynamic strain aging on the appearance of the rare earth texture component in magnesium alloys , 2011 .

[17]  S. Agnew,et al.  Incorporation of Solid Solution Alloying Effects into Polycrystal Modeling of Mg Alloys , 2011 .

[18]  X. Li,et al.  Sheet texture modification in magnesium-based alloys by selective rare earth alloying , 2011 .

[19]  Huamiao Wang,et al.  On crystal plasticity formability analysis for magnesium alloy sheets , 2011 .

[20]  A. Minor,et al.  In situ TEM compression testing of Mg and Mg–0.2 wt.% Ce single crystals , 2011 .

[21]  C. Tomé,et al.  Evaluation of self-consistent polycrystal plasticity models for magnesium alloy AZ31B sheet , 2010 .

[22]  K. Kainer,et al.  Effect of rare earth elements on the microstructure and texture development in magnesium-manganese alloys during extrusion , 2010 .

[23]  K. Kainer,et al.  Effect of rare earth additions on microstructure and texture development of magnesium alloy sheets , 2010 .

[24]  T. Pollock.  Weight Loss with Magnesium Alloys , 2010, Science.

[25]  S. Choi,et al.  Simulation of deformation twins and deformation texture in an AZ31 Mg alloy under uniaxial compression , 2007 .

[26]  S. Agnew,et al.  The texture and anisotropy of magnesium–zinc–rare earth alloy sheets , 2007 .

[27]  C. Tomé,et al.  Modeling Texture, Twinning and Hardening Evolution during Deformation of Hexagonal Materials , 2005 .

[28]  S. Agnew,et al.  Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B , 2005 .

[29]  C. Tomé,et al.  Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y , 2001 .

[30]  S. Kalidindi.  Incorporation of deformation twinning in crystal plasticity models , 1998 .

[31]  Ricardo A. Lebensohn,et al.  A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals : application to zirconium alloys , 1993 .

[32]  U. F. Kocks,et al.  The relation between macroscopic and microscopic strain hardening in F.C.C. polycrystals , 1984 .

[33]  P. Houtte,et al.  Simulation of the rolling and shear texture of brass by the Taylor theory adapted for mechanical twinning , 1978 .

[34]  Yang Zhou,et al.  Multi-Island Genetic Algorithm and Kriging Model-Based Design of Vehicle Product Comprising Multi-Material , 2018, IEEE Access.

[35]  Omkar Kulkarni,et al.  Genetic Algorithm and its Applications to Mechanical Engineering: A Review , 2015 .

[36]  R. H. Wagoner,et al.  Formability of a more randomly textured magnesium alloy sheet: Application of an improved warm sheet formability test , 2010 .