Design, fabrication, and control of MEMS-based actuator arrays for air-flow distributed micromanipulation

This paper reports the design, fabrication and control of arrayed microelectromechanical systems (MEMS)-based actuators for distributed micromanipulation by generation and control of an air-flow force field. The authors present an original design of pneumatic microactuator, improving reliability and durability of a distributed planar micromanipulator described in the previous study. The fabrication process is based on silicon-on-insulator (SOI) wafer and HF (hydroflouric acid) vapor release, which also significantly increases the production yield of the 560 microactuator array device of 35times35 mm2. Minimization of the electrostatic actuation pull-in voltage through suspension shaping fabrication was also studied, and successfully validated for electrical efficiency improvement. A distributed control method to achieve good conveyance performance and reduce motion control instability was investigated. An emulation approach was chosen to validate a decentralized control strategy on the distributed active surface in order to conduct a proof-of-concept of a future smart structure, integrating sensors, intelligence, and microactuators. Thus, a centralized/decentralized control flow, inspired by autonomous mobile robot principles, was applied. It was modeled and implemented using C-programming language. Experimental and characterization results validate the control method for feedback micromanipulation with good velocity and load capacity performance

[1]  O. Guenat,et al.  A pneumatic air table realized by micro-EDM , 1998 .

[2]  Craig D. McGray,et al.  Power delivery and locomotion of untethered microactuators , 2003 .

[3]  H. I. Bozma,et al.  Sequential and parallel models in noncooperative games for decentralized decision making in vision systems , 1991, Conference Proceedings 1991 IEEE International Conference on Systems, Man, and Cybernetics.

[4]  Y.A. Chapuis,et al.  A MEMS array for pneumatic conveyor and its control based on distributed system , 2005, 18th IEEE International Conference on Micro Electro Mechanical Systems, 2005. MEMS 2005..

[5]  Mark S. Nixon,et al.  Feature Extraction and Image Processing , 2002 .

[6]  N. C. MacDonald,et al.  Upper and Lower Bounds for Programmable Vector Fields with Applications to MEMS and Vibratory Plate Parts Feeders , 1996 .

[7]  H. Fujita,et al.  Vapor Hydrofluoric Acid Sacrificial Release Technique for Micro Electro Mechanical Systems Using Labware , 2003 .

[8]  J. M. Kim,et al.  SOI-based fabrication processes of the scanning mirror having vertical comb fingers , 2002 .

[9]  David Plummer,et al.  Surface-Micromachined Mechanisms , 2001 .

[10]  K. Pister,et al.  A planar air levitated electrostatic actuator system , 1990, IEEE Proceedings on Micro Electro Mechanical Systems, An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots..

[11]  Hiroyuki Fujita,et al.  Bulk Micromachined Durable Air-Flow Microactuator Array for Robust Conveyance Systems , 2001 .

[12]  Hiroyuki Fujita,et al.  A conveyance system using air flow based on the concept of distributed micro motion systems , 1994 .

[13]  H. Nathanson,et al.  The resonant gate transistor , 1967 .

[14]  B. Donald,et al.  A Distributed, Universal Device For Planar Parts Feeding: Unique Part Orientation in Programmable Force Fields , 2000 .

[15]  N. C. MacDonald,et al.  Single-crystal silicon actuator arrays for micro manipulation tasks , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[16]  Hiroyuki Fujita,et al.  System design for cooperative control of a microactuator array , 1995, IEEE Trans. Ind. Electron..

[17]  H. Fujita,et al.  Pneumatic two-dimensional conveyance system for autonomous distributed MEMS , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[18]  Hyungpil Moon,et al.  Distributed manipulation with passive air flow , 2001, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180).

[19]  Patrick C P Cheung,et al.  AirJet paper mover , 2000 .

[20]  Hiroyuki Fujita,et al.  Fabrication and operation of polyimide bimorph actuators for a ciliary motion system , 1993 .

[21]  Yui-Lam Chan,et al.  Edge oriented block motion estimation for video coding , 1997 .

[22]  Suzana Uran,et al.  Control of rigid and flexible objects on a pneumatic active surface device , 2004 .

[23]  Mark H. Yim,et al.  Two Approaches to Distributed Manipulation , 2000 .

[24]  Hiroyuki Fujita,et al.  Conveyor for Pneumatic Two-Dimensional Manipulation Realized by Arrayed MEMS and its Control , 2004, J. Robotics Mechatronics.

[25]  Markus P. J. Fromherz,et al.  Force allocation in a large-scale distributed active surface , 2003, IEEE Trans. Control. Syst. Technol..

[26]  J. Seeger,et al.  Stabilization of electrostatically actuated mechanical devices , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).