Tribological performance of a polyethersulfone (PESU)-based nanocomposite with potential surface changes of the metallic counterbody

[1]  Bin Huang,et al.  Electrochemical performance of Fe2(SO4)3 as a novel anode material for lithium-ion batteries , 2021 .

[2]  G. Takacs,et al.  Surface Modification of Polyethersulfone (PES) with UV Photo-Oxidation , 2021 .

[3]  A. Schlarb,et al.  Effects of the Velocity Sequences on the Friction and Wear Performance of PEEK-Based Materials , 2021, Tribology Letters.

[4]  D. Burris,et al.  Polymers Tribology Exposed: Eliminating Transfer Film Effects to Clarify Ultralow Wear of PTFE , 2020, Tribology Letters.

[5]  H. Schürmann,et al.  Kunststoffe , 2018, Dubbel Taschenbuch für den Maschinenbau 1: Grundlagen und Tabellen.

[6]  Shicheng Yan,et al.  Tribological behavior of graphite oxide reinforced polyethersulfone composite under drying sliding condition , 2018 .

[7]  Weigang Zhang,et al.  Mechanical and tribological properties of short glass fiber and short carbon fiber reinforced polyethersulfone composites: A comparative study , 2018, Composites Communications.

[8]  Noof A. Alenazi,et al.  Nanocomposite-Based Aminated Polyethersulfone and Carboxylate Activated Carbon for Environmental Application. A Real Sample Analysis , 2018 .

[9]  Pradeep L. Menezes,et al.  Mechanical, physical and tribological characterization of nano-cellulose fibers reinforced bio-epoxy composites: An attempt to fabricate and scale the 'Green' composite. , 2016, Carbohydrate polymers.

[10]  Yulin Yang,et al.  Tribological behavior of polyethersulfone-reinforced polytetrafluoroethylene composite under dry sliding condition , 2015 .

[11]  N. Soin,et al.  Influence of plasma pre-treatment of polytetrafluoroethylene (PTFE) micropowders on the mechanical and tribological performance of Polyethersulfone (PESU)–PTFE composites , 2015 .

[12]  W. Ke,et al.  Effect of sulphur dioxide on the corrosion of a low alloy steel in simulated coastal industrial atmosphere , 2014 .

[13]  H. Liao,et al.  Investigation of surface properties and mechanical and tribological behaviors of polyimide based composite coatings , 2013 .

[14]  Q. Guo,et al.  Thermal, crystalline, and tribological properties of PEEK/PEI/PES plastics alloys , 2013 .

[15]  J. Madaan,et al.  Tribological behavior of natural fiber reinforced PLA composites , 2013 .

[16]  B. Lavédrine,et al.  Raman and FTIR spectroscopy applied to the conservation report of paleontological collections: identification of Raman and FTIR signatures of several iron sulfate species such as ferrinatrite and sideronatrite , 2012 .

[17]  Gottfried W. Ehrenstein,et al.  Polymer Werkstoffe , 2011 .

[18]  M. Cho.  The role of transfer film and back transfer behavior on the tribological performance of polyoxymethylene in sliding , 2009 .

[19]  L. Chang,et al.  The roles of nano-SiO2 particles on the tribological behavior of short carbon fiber reinforced PEEK , 2009 .

[20]  Tongsheng Li,et al.  Comparative Study of Tribological Properties of Polyphenylene Sulfide (PPS), Polyethersulfone (PES), and Polysulfone (PSU) , 2009 .

[21]  Haojie Song,et al.  Tribological behavior of polyurethane-based composite coating reinforced with TiO2 nanotubes , 2008 .

[22]  L. Ye,et al.  Tribological properties of high temperature resistant polymer composites with fine particles , 2007 .

[23]  Li Chang,et al.  On the sliding wear of nanoparticle filled polyamide 66 composites , 2006 .

[24]  N. S. McIntyre,et al.  Investigation of multiplet splitting of Fe 2p XPS spectra and bonding in iron compounds , 2004 .

[25]  W. Sawyer,et al.  A study on the friction and wear behavior of PTFE filled with alumina nanoparticles , 2003 .

[26]  P. J. Reucroft,et al.  XPS study of carbon fiber surfaces treated by thermal oxidation in a gas mixture of O2/(O2+N2) , 2001 .

[27]  Youwei Du,et al.  Preparation of ZnS nanoparticles by ultrasonic radiation method , 1998 .

[28]  S. Bahadur,et al.  Investigation of the influence of CaS, CaO and CaF2 fillers on the transfer and wear of nylon by microscopy and XPS analysis , 1996 .

[29]  J. Karger‐Kocsis,et al.  Effects of steel counterface roughness and temperature on the friction and wear of PE(E)K composites under dry sliding conditions , 1991 .

[30]  G. López,et al.  XPS O 1s binding energies for polymers containing hydroxyl, ether, ketone and ester groups , 1991 .

[31]  Tribologie-Handbuch , 2020 .

[32]  Zeynep,et al.  The Effect of Counter-face Roughness on the Tribological Behavior of Filled and Unfilled PTFE , 2015 .

[33]  S. S. Senthil Kumar,et al.  Sulfonated polyethersulfone-based membranes for metal ion removal via a hybrid process , 2013, Journal of Materials Science.

[34]  S. Syed.  ATMOSPHERIC CORROSION OF MATERIALS , 2006 .

[35]  E. R. Fisher,et al.  Membrane Surface Modification by Plasma-Induced Polymerization of Acrylamide for Improved Surface Properties and Reduced Protein Fouling , 2003 .

[36]  M. Ashby,et al.  Temperature Maps for Frictional Heating in Dry Sliding , 1991 .

[37]  K. Ludema,et al.  Mechanisms of formation of polymeric transfer films , 1978 .