DC temperature measurements for power gain monitoring in RF power amplifiers

In this paper we demonstrate that the steady state temperature increase due to the power dissipated by the circuit under test can be used as observable to test the gain of a 2GHz linear class A Power Amplifier. As a proof of concept, we use two strategies to monitor the temperature: a temperature sensor embedded within the same silicon die, which can be used for a BIST approach, and an Infra Red camera, with applications to failure analysis and product debugging.

[1]  E. Aldrete-Vidrio,et al.  Strategies for built-in characterization testing and performance monitoring of analog RF circuits with temperature measurements , 2010 .

[2]  Marvin Onabajo,et al.  Analog Circuit Design for Process Variation-Resilient Systems-on-a-Chip , 2012 .

[3]  José Silva-Martínez,et al.  Survey of Robustness Enhancement Techniques for Wireless Systems-on-a-Chip and Study of Temperature as Observable for Process Variations , 2011, J. Electron. Test..

[4]  J. Soden,et al.  IC failure analysis: techniques and tools for quality reliability improvement , 1993, Proc. IEEE.

[5]  Baudouin Martineau,et al.  Non-invasive monitoring of CMOS power amplifiers operating at RF and mmW Frequencies using an on-chip thermal sensor , 2011, 2011 IEEE Radio Frequency Integrated Circuits Symposium.

[6]  Tony S. H. Lee,et al.  The design of cmos radio-frequency integrated circuits"cambridge university press , 1998 .

[7]  V. d'Alessandro,et al.  Extraction and modeling of self-heating and mutual thermal coupling impedance of bipolar transistors , 2004, IEEE Journal of Solid-State Circuits.

[8]  Salvador Mir,et al.  Testing RF circuits with true non-intrusive built-in sensors , 2012, 2012 Design, Automation & Test in Europe Conference & Exhibition (DATE).

[9]  Joe Kelly,et al.  Production Testing of Rf and System-On-A-Chip Devices for Wireless Communications (Artech House Microwave Library) , 2004 .

[10]  D. Blackburn.  Temperature measurements of semiconductor devices - a review , 2004, Twentieth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (IEEE Cat. No.04CH37545).

[11]  Richard E. Anderson,et al.  IC failure analysis: techniques and tools for quality and reliability improvement , 1995 .

[12]  Diego Mateo,et al.  On the Use of Static Temperature Measurements as Process Variation Observable , 2012, J. Electron. Test..

[13]  Abhijit Chatterjee,et al.  Use of embedded sensors for built-in-test RF circuits , 2004, 2004 International Conferce on Test.

[14]  José Luis González,et al.  Electro-thermal coupling analysis methodology for RF circuits , 2010, 2010 16th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC).

[15]  Antonio Rubio,et al.  Thermal coupling in integrated circuits: application to thermal testing , 2001, IEEE J. Solid State Circuits.

[16]  José Silva-Martínez,et al.  Electrothermal Design Procedure to Observe RF Circuit Power and Linearity Characteristics With a Homodyne Differential Temperature Sensor , 2011, IEEE Transactions on Circuits and Systems I: Regular Papers.

[17]  Abhijit Chatterjee,et al.  Use of embedded sensors for built-in-test RF circuits , 2004 .

[18]  X. Perpina,et al.  Electro-thermal characterization of a differential temperature sensor and the thermal coupling in a 65nm CMOS IC , 2012, 18th International Workshop on THERMal INvestigation of ICs and Systems.