Ultimate Strength Assessment of Ship Stiffened Panel under Arctic Conditions

Environmental changes, especially global climate change, are creating new routes to reduce a shipping service distance in Arctic area. The Arctic routes are shorter than 60% of existing ways Panama or Suez canal). For this reason, ship owners prefer to navigate in Arctic area and a transportation of goods though the Arctic area is increasing. But the low temperature in Arctic condition changes the material properties. Especially, the material will be brittle and strength will increase. And an ultimate strength analysis of ship stiffened panels is changed depending on temperatures. In present study, the ultimate strength analysis of stiffened panels in double hull oil tankers is performed under various low temperatures with the material properties obtained by tensile coupon test. The analytical method as named ALPS/ULSAP was used for analysis method and 6 kinds of temperature (20, 0, -20, -40, -60 and -80℃) were considered to investigate the effect of Arctic conditions.

[1]  이승재,et al.  하이브리드 입자-격자 방법에서의 압력장 계산 , 2014 .

[2]  Jeom Kee Paik,et al.  Nonlinear finite element method models for ultimate strength analysis of steel stiffened-plate structures under combined biaxial compression and lateral pressure actions—Part I: Plate elements , 2009 .

[3]  Yim S.J.,et al.  Buckling Analysis of Stiffened Plates , 1981 .

[4]  Jin-Won Yu,et al.  Improvement in Resistance Performance of a Medium-Sized Passenger Ship with Variation of Bulbous Bow Shape , 2014 .

[5]  Jeom Kee Paik,et al.  Methods for ultimate limit state assessment of ships and ship-shaped offshore structures: Part II stiffened panels , 2008 .

[6]  Jeom Kee Paik,et al.  Effects of Low Temperature on ASTM A131: An Experimental and Numerical Study , 2012 .

[7]  Jeom Kee Paik,et al.  Ultimate strength formulations for stiffened panels under combined axial load, in-plane bending and lateral pressure: a benchmark study , 2002 .

[8]  Lee J.S..  Compressive Ultimate Strength Analysis of Plates with Initial Imperfections , 1985 .

[9]  박웅섭,et al.  A Comparative Study on Mechanical Behavior of Low Temperature Application Materials for Ships and Offshore Structures , 2011 .

[10]  D. K. Lee.  The Use of Rankine Source to Evaluate Velocities around a Ship Hull , 1981 .

[11]  Jeom Kee Paik,et al.  Ultimate limit state design of steel-plated structures , 2003 .

[12]  Jeom Kee Paik,et al.  Effect of corrosion on the ultimate strength of double hulloil tankers – Part I: stiffened panels , 2012 .

[13]  Joonmo Choung,et al.  Average Compressive Strengths of Stiffened Plates for In-Service Vessels Under Lateral Pressure , 2011 .

[14]  Chun-Sik Shim,et al.  On the Mechanical Properties at Low Temperatures for Steels of Ice-Class Vessels , 2011 .

[15]  Jeom Kee Paik,et al.  Ship Structural Analysis and Design , 2010 .

[16]  Hyung-Zune Park,et al.  Ultimate Strength Analysis of Curved Stiffened Shells of Container Bilge Strakes , 2007 .