Study on an Optimal Control Method for Energy Injection Resonant AC/AC High Frequency Converters

In energy injection resonant AC-AC converters, due to the low frequency effect of the AC input envelope and the low energy injection losses requirement, the constant and steady control of the high frequency AC output envelope is still a problem that has not been solved very well. With the aid of system modeling, this paper analyzes the mechanism of the envelope pit on the resonant AC current. The computing methods for the critical damping point, the falling time and the bottom value of the envelope pit are presented as well. Furthermore, this paper concludes the stability precondition of the system AC output. Accordingly, an optimal control method for the AC output envelope is put forward based on the envelope prediction model. This control method can predict system responses dynamically under different series of control decisions. In addition, this control method can select best series of control decisions to make the AC output envelope stable and constant. Simulation and experimental results for a contactless power transfer system verify the control method.

[1]  Tsuyoshi Higuchi,et al.  Optimization of input and output filters in matrix converter drive system , 2008 .

[2]  Hao Leo Li,et al.  Development of a Direct AC-AC Converter Based on a DSPACE Platform , 2006, 2006 International Conference on Power System Technology.

[3]  Minh-Khai Nguyen,et al.  Single-Phase Z-Source AC/AC Converter with Wide Range Output Voltage Operation , 2009 .

[4]  Chen Daolian Reference sinusoid circuit of grid-connected photovoltaic system based on software phase lock technique , 2009 .

[5]  Jian Liu,et al.  The uni-polarity phase-shifted controlled voltage mode AC–AC converters with high frequency AC link , 2006, IEEE Transactions on Power Electronics.

[6]  S. Rama Reddy Closed Loop Controlled AC-AC Converter for Induction Heating , 2009 .

[7]  Lee Empringham,et al.  Control Design of a Three-Phase Matrix-Converter-Based AC–AC Mobile Utility Power Supply , 2008, IEEE Transactions on Industrial Electronics.

[8]  Grant Anthony Covic,et al.  An AC Processing Pickup for IPT Systems , 2010, IEEE Transactions on Power Electronics.

[9]  Aiguo Patrick Hu,et al.  Primary Current Generation for a Contactless Power Transfer System Using Free Oscillation and Energy Injection Control , 2011 .

[10]  J. Acero,et al.  Multiple-output resonant matrix converter for multiple-inductive-load systems , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[11]  Lei Li,et al.  Bi-polarity phase-shifted controlled voltage mode AC/AC converters with high frequency AC link , 2003, IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03..

[12]  S. Rama Reddy,et al.  Embedded Controlled Pulse converter Fed Induction heater , 2010, J. Circuits Syst. Comput..

[13]  Jang-Mok Kim,et al.  An Optimal Current Distribution Method of Dual-Rotor BLDC Machines , 2013 .

[14]  Zhiqiang Guo,et al.  Parallel Connected High Frequency AC Link Inverters Based on Full Digital Control , 2012 .

[15]  Bhim Singh,et al.  Improved Power Quality IHQRR-BIFRED Converter Fed BLDC Motor Drive , 2013 .