Spray-deposited PEDOT:PSS for inverted organic solar cells

The method of spray-depositing PEDOT:PSS allows the fabrication of thin films with controlled thickness on polymer layers. PEDOT:PSS is used in inverted ITO/TiO2/P3HT:PCBM/PEDOT:PSS/Ag solar cells to optimize the work function of the hole-collecting electrode. The interlayer is also found to protect the organic layer during metal top deposition and improve the contact between P3HT–PCBM and the Ag electrode, which is confirmed using two different metal-deposition techniques; thermal evaporation and sputtering. Cells with PEDOT:PSS show full VOC and efficiency immediately after fabrication, whereas devices without PEDOT:PSS exhibit low performance in the beginning and improve significantly during the first 10 days after production. Devices are long-term stable if stored in the dark and in ambient air and show no significant performance decrease after 80 days. No inert nitrogen atmosphere is needed for any fabrication step, thus reducing the potential production costs since no glove box has to be used.

[1]  Bert de Boer,et al.  Tuning of metal work functions with self-assembled monolayers , 2004, SPIE Photonics Europe.

[2]  Mikkel Jørgensen,et al.  Upscaling of polymer solar cell fabrication using full roll-to-roll processing. , 2010, Nanoscale.

[3]  C. Tang.  Two‐layer organic photovoltaic cell , 1986 .

[4]  Valentin D. Mihailetchi,et al.  Charge Transport and Photocurrent Generation in Poly(3‐hexylthiophene): Methanofullerene Bulk‐Heterojunction Solar Cells , 2006 .

[5]  Christoph J. Brabec,et al.  Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency , 2006 .

[6]  W. M. Haynes.  CRC Handbook of Chemistry and Physics , 1990 .

[7]  John E. Anthony,et al.  Spray-deposited poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) top electrode for organic solar cells , 2008 .

[8]  Christoph J. Brabec,et al.  Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact , 2006 .

[9]  Shijun Jia,et al.  Polymer–Fullerene Bulk‐Heterojunction Solar Cells , 2009, Advanced materials.

[10]  F. Krebs,et al.  Stability/degradation of polymer solar cells , 2008 .

[11]  Jan Fyenbo,et al.  Grid-connected polymer solar panels: initial considerations of cost, lifetime, and practicality. , 2010, Optics express.

[12]  J. Nelson.  The physics of solar cells , 2003 .

[13]  Y. Yoshida,et al.  Organic thin-film solar cells with a Cu anode: Improvement of the photovoltaic properties on aging in air , 2009 .

[14]  H. Hesse,et al.  Discotic materials for organic solar cells: Effects of chemical structure on assembly and performance , 2010 .

[15]  P. Würfel,et al.  Physics of solar cells , 2005 .

[16]  F. Faupel,et al.  Diffusion of gold and silver in Bisphenol A polycarbonate , 1997 .

[17]  Wolfgang Kowalsky,et al.  Inverted hybrid organic light-emitting device with polyethylene dioxythiophene-polystyrene sulfonate as an anode buffer layer , 2003 .

[18]  F. Krebs,et al.  A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies , 2009 .

[19]  Miss A.O. Penney.  (b) , 1974, The New Yale Book of Quotations.

[20]  Takayuki Kuwabara,et al.  Inverted type bulk-heterojunction organic solar cell using electrodeposited titanium oxide thin films as electron collector electrode , 2009 .

[21]  A. C. Dürr,et al.  Morphology and Thermal Stability of Metal Contacts on Crystalline Organic Thin Films , 2002 .

[22]  F. Faupel,et al.  Diffusion of gold and silver in bisphenol trimethylcyclohexanen polycarbonate , 1997 .

[23]  Nerayo P. Teclemariam,et al.  Charge transport in hybrid nanorod-polymer composite photovoltaic cells , 2002 .

[24]  R. C. Weast.  CRC Handbook of Chemistry and Physics , 1973 .