On the Design and Performance Analysis of Flexible Planar Monopole Ultra-Wideband Antennas for Wearable Wireless Applications

With the promising developments in wearable communication technology, attention towards flexible electronics is increasing day-by-day. This study presents flexible low-profile ultra-wideband (UWB) antennas for wearable applications. The antenna comprised of a modified dewdrop-inspired radiator and a defected ground plane and has an impedance bandwidth of 3.1–10.6 GHz. The antenna flexibility is investigated using four different substrates (polyester, polyamide, denim, and Teslin) and tested on a cotton shirt and a high-end Res-Q jacket to evaluate their performance stability for body-worn applications. The fabricated planar dewdrop-shaped radiator (PDSR) antennas have a radiation efficiency of >90%, a gain of >4 dBi, and a group delay variation of fewer than 0.5 ns. The antenna conformability is measured by placing the fabricated antennas on various curved and nonplanar parts of the human body. The aforementioned antennas offer better flexibility for different bent conditions. The specific absorption rate (SAR) of the designed antennas is investigated to determine their wearability, and values are found to be less than 0.2 W/Kg. Also, the received signal strength (RSS) is discussed in order to analyze signal attenuation, and the performance analysis of the antennas is compared.

[1]  Richa Bharadwaj,et al.  Design and Performance Analysis of Compact Wearable Textile Antennas for IoT and Body-Centric Communication Applications , 2021, International Journal of Antennas and Propagation.

[2]  S. Palaniswamy,et al.  Reduced specific absorption rate compact flexible monopole antenna system for smart wearable wireless communications , 2021 .

[3]  H. Andre,et al.  A Wideband Rectangular Patch Microstrip Antenna using Quad-Slotted Ground Plane , 2020, IOP Conference Series: Materials Science and Engineering.

[4]  M. N. Osman,et al.  Flexible Co-Planar Waveguide (CPW)-Fed Y-Shaped Patch UWB Antenna for Off-Body Communication , 2020, Journal of Physics: Conference Series.

[5]  Qingyue Chen,et al.  Flexible UWB antenna fabricated on polyimide substrate by surface modification and in situ self-metallization technique , 2019, Microelectronic Engineering.

[6]  Bin Hu,et al.  A Wearable PIFA With an All-Textile Metasurface for 5 GHz WBAN Applications , 2019, IEEE Antennas and Wireless Propagation Letters.

[7]  B. T. P. Madhav,et al.  Circular ring structured ultra‐wideband antenna for wearable applications , 2018, International Journal of RF and Microwave Computer-Aided Engineering.

[8]  Mengjun Wang,et al.  CPW‐fed flexible monopole antenna with H and two concentric C slots on textile substrate, backed by EBG for WBAN , 2018, International Journal of RF and Microwave Computer-Aided Engineering.

[9]  T. Lasri,et al.  Flexible UWB organic antenna for wearable technologies application , 2018 .

[10]  Luciano Tarricone,et al.  Wearable Antennas for Remote Health Care Monitoring Systems , 2017 .

[11]  Carlos Mendes,et al.  A Dual-Mode Single-Band Wearable Microstrip Antenna for Body Area Networks , 2017, IEEE Antennas and Wireless Propagation Letters.

[12]  Bappaditya Mandal,et al.  Wearable tri-band SIW based antenna on leather substrate , 2015 .

[13]  Chang Won Jung,et al.  A flexible and transparent antenna on a polyamide substrate for laptop computers , 2015 .

[14]  Saou-Wen Su,et al.  Integrated Metal-Frame Antenna for Smartwatch Wearable Device , 2015, IEEE Transactions on Antennas and Propagation.

[15]  T. I. Yuk,et al.  Design of a textile ultra-wideband antenna with stable performance for body-centric wireless communications , 2014 .

[16]  Haider Raad Khaleel,et al.  Design and Fabrication of Compact Inkjet Printed Antennas for Integration Within Flexible and Wearable Electronics , 2014, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[17]  C. Person,et al.  A Novel Investigation of a Broadband Integrated Inverted-F Antenna Design; Application for Wearable Antenna , 2014, IEEE Transactions on Antennas and Propagation.

[18]  Duixian Liu,et al.  Wearable and RFID Antennas , 2013 .

[19]  A. K. Skrivervik,et al.  System Fidelity Factor: A New Method for Comparing UWB Antennas , 2011, IEEE Transactions on Antennas and Propagation.

[20]  P. Capece,et al.  Active SAR Antennas: Design, Development, and Current Programs , 2009 .

[21]  B. Madhav,et al.  A CIRCULARLY POLARIZED QUAD-BAND WEARABLE TEXTILE ANTENNA INTEGRATED WITH TRIPLE BAND AMC REFLECTOR FOR WBAN APPLICATIONS , 2022, Progress In Electromagnetics Research C.

[22]  Md. Shazzadul Islam,et al.  A low-profile flexible planar monopole antenna for biomedical applications , 2022, Engineering Science and Technology, an International Journal.

[23]  T. Rao,et al.  DESIGN AND ANALYSIS OF WIDEBAND MONOPOLE ANTENNAS FOR FLEXIBLE/WEARABLE WIRELESS DEVICE APPLICATIONS , 2017 .

[24]  R Zahran Sherif,et al.  How Bending Affects a Flexible UWB Antenna , 2017 .

[25]  S. Noghanian,et al.  AMC Integrated Textile Monopole Antenna for Wearable Applications , 2016 .

[26]  Yen-Sheng Chen,et al.  A Low-Profile Wearable Antenna Using a Miniature High Impedance Surface for Smartwatch Applications , 2016, IEEE Antennas and Wireless Propagation Letters.

[27]  Yingsong Li,et al.  A Quadruple Band-Notched UWB Antenna by Using Arc-Shaped Slot and Rotated E-shaped Resonator , 2016 .