Effects of mechanical properties and surface friction on elasto-plastic sliding contact

[1]  A. Minor,et al.  Indentation across size scales and disciplines: Recent developments in experimentation and modeling , 2007 .

[2]  P. Larsson,et al.  Journal of Mechanics of Materials and Structures vol. 10 (2015), no. 1 , 2008 .

[3]  Subra Suresh,et al.  The frictional sliding response of elasto-plastic materials in contact with a conical indenter , 2007 .

[4]  P. Wriggers.  Introduction to Contact Mechanics , 2006 .

[5]  N. Chiba,et al.  Representative strain of indentation analysis , 2005 .

[6]  S. Rokhlin,et al.  Inverse scaling functions in nanoindentation with sharp indenters: Determination of material properties , 2005 .

[7]  Kun Sun,et al.  FEM computation of groove ridge and Monte Carlo simulation in two-body abrasive wear , 2005 .

[8]  S. Youn,et al.  A study of nanoscratch experiments of the silicon and borosilicate in air , 2004 .

[9]  Yang-Tse Cheng,et al.  Scaling, dimensional analysis, and indentation measurements , 2004 .

[10]  Jian Lu,et al.  Depth-sensing instrumented indentation with dual sharp indenters: stability analysis and corresponding regularization schemes , 2004 .

[11]  Christopher A. Schuh,et al.  A survey of instrumented indentation studies on metallic glasses , 2004 .

[12]  G. Pharr,et al.  Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology , 2004 .

[13]  J. Alcalá,et al.  The role of friction on sharp indentation , 2004 .

[14]  Subra Suresh,et al.  Some critical experiments on the strain-rate sensitivity of nanocrystalline nickel , 2003 .

[15]  M. Bolduc,et al.  Optimum tribological improvement of aluminum using oxygen plasma source ion implantation , 2003 .

[16]  S. Suresh,et al.  Depth-sensing instrumented indentation with dual sharp indenters , 2003 .

[17]  Mark R. VanLandingham,et al.  Review of Instrumented Indentation , 2003, Journal of research of the National Institute of Standards and Technology.

[18]  Johann Michler,et al.  Determination of plastic properties of metals by instrumented indentation using different sharp indenters , 2003 .

[19]  J. Alcalá,et al.  A hardness equation for sharp indentation of elastic-power-law strain-hardening materials , 2002 .

[20]  K. Matsuda.  Prediction of stress-strain curves of elastic-plastic materials based on the Vickers indentation , 2002 .

[21]  E. Felder,et al.  Finite-element analysis of deformation during indentation and scratch tests on elastic-perfectly plastic materials , 2002 .

[22]  Noel P. O’Dowd,et al.  Determination of the mechanical properties of metallic thin films and substrates from indentation tests , 2002 .

[23]  Ghatu Subhash,et al.  Investigation of the overall friction coefficient in single-pass scratch test , 2002 .

[24]  Subra Suresh,et al.  Computational modeling of the forward and reverse problems in instrumented sharp indentation , 2001 .

[25]  E. Felder,et al.  Mechanical analysis of the scratch test on elastic and perfectly plastic materials with the three-dimensional finite element modeling , 2001 .

[26]  T. Troczynski,et al.  Sliding and abrasive wear of composite sol)gel alumina coated Al alloys , 2000 .

[27]  Stefan Carlsson,et al.  On frictional effects at inelastic contact between spherical bodies , 2000 .

[28]  Norman A. Fleck,et al.  Spherical indentation of elastic–plastic solids , 1999, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[29]  J. Barbera,et al.  Contact mechanics , 1999 .

[30]  C. Subramanian,et al.  Abrasive wear of aluminium composites—a review , 1996 .

[31]  John A. Williams,et al.  Analytical models of scratch hardness , 1996 .

[32]  Yiu-Wing Mai,et al.  Particle effects on friction and wear of aluminium matrix composites , 1995 .

[33]  J. Bi,et al.  Effect of particle size on wear behaviour of SiC particulate-reinforced aluminum alloy composites , 1995 .

[34]  Mai Yiu-wing,et al.  Modelling friction and wear of scratching ceramic particle-reinforced metal composites , 1994 .

[35]  I. Hutchings.  Tribology: Friction and Wear of Engineering Materials , 1992 .

[36]  H. Shi,et al.  A friction effect in low-load hardness testing of copper and aluminium , 1990 .

[37]  H. Shi,et al.  Friction effect in low load hardness testing of iron , 1989 .

[38]  C. A. Brookes.  Scratch and indentation hardness of crystals , 1981 .

[39]  C. A. Brookes,et al.  Anisotropy in the scratch hardness of cubic crystals , 1979, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[40]  D. Tabor.  Hardness of Metals , 1937, Nature.