Microcapsules filled with reactive solutions for self-healing materials

Abstract Microcapsules containing a solvent and reactive epoxy resin are a critical component for the development of cost-effective, low toxicity, and low flammability self-healing materials. We report a robust in situ encapsulation method for protection of a variety of oil soluble solvents and reactive epoxy resins surrounded by a thin, polymeric, urea–formaldehyde (UF) shell. Resin–solvent capsules are produced in high yield with diameters ranging from 10 to 300 μm by controlling agitation rates. These capsules have a continuous inner shell wall and a rough exterior wall that promotes bonding to a polymer matrix. Capsules as small as 300 nm in diameter are achieved through sonication and stabilization procedures. The presence of both the epoxy resin and solvent core components is confirmed by differential scanning calorimetry (DSC) measurements, and the relative amount of epoxy and solvent in the liquid core is determined by thermogravimetric analysis (TGA). The capsules are shown to satisfy the requirements for use in self-healing materials including processing survivability, thermal stability, and efficient in situ rupture for delivery of healing agent.

[1]  H. D. H. Stöver,et al.  Polymer microcapsules by interfacial polyaddition between styrene-maleic anhydride copolymers and amines , 2002 .

[2]  Simon Benita,et al.  Microencapsulation : methods and industrial applications , 1996 .

[3]  Li Yuan,et al.  Synthesis and characterization of microencapsulated dicyclopentadiene with melamine–formaldehyde resins , 2007 .

[4]  K. Landfester,et al.  Magnetic Polystyrene Nanoparticles with a High Magnetite Content Obtained by Miniemulsion Processes , 2003 .

[5]  Ming Qiu Zhang,et al.  Preparation and characterization of microencapsulated polythiol , 2008 .

[6]  Markus Antonietti,et al.  Preparation of polymeric nanocapsules by miniemulsion polymerization. , 2001 .

[7]  Nancy R. Sottos,et al.  A Self‐Healing Poly(Dimethyl Siloxane) Elastomer , 2007 .

[8]  J. Argillier,et al.  Preparation of oily core polyamide microcapsules via interfacial polycondensation , 2003 .

[9]  N. Sottos,et al.  In situ poly(urea-formaldehyde) microencapsulation of dicyclopentadiene , 2003, Journal of microencapsulation.

[10]  M. R. Rao,et al.  Trends in food science and technology. , 1989 .

[11]  B. Sillion,et al.  Some aspects of reaction between epoxy and bisphenol , 1988 .

[12]  Yu Zhu,et al.  Macromolecular Chemistry and Physics , 2006 .

[13]  H. V. POTTER,et al.  Modern Plastics , 2022, Nature.

[14]  S. Cosco,et al.  Properties of poly(urea-formaldheyde) microcapsules containing an epoxy resin , 2007 .

[15]  Xing Liu,et al.  Synthesis and characterization of melamine-urea-formaldehyde microcapsules containing ENB-based self-healing agents , 2007, International Conference on Smart Materials and Nanotechnology in Engineering.

[16]  M. Márquez,et al.  Production of Cocoa Butter Microcapsules Using an Electrospray Process , 2005 .

[17]  N. Sottos,et al.  Wax‐Protected Catalyst Microspheres for Efficient Self‐Healing Materials , 2005 .

[18]  Journal of Applied Polymer Science , 1959, Nature.

[19]  Kolloid-Gesellschaft Colloid and Polymer Science , 1960, Nature.

[20]  Journal of agricultural and food chemistry-2000 , 2000, Journal of agricultural and food chemistry.

[21]  D. T. McQuade,et al.  Polyurea microcapsules from oil-in-oil emulsions via interfacial polymerization , 2006 .

[22]  E. M. Elliot Plastics in engineering , 1945 .

[23]  N. Sottos,et al.  In situ poly(urea-formaldehyde) microencapsulation of dicyclopentadiene , 2003 .

[24]  Geoffrey Ingram Taylor,et al.  The Viscosity of a Fluid Containing Small Drops of Another Fluid , 1932 .

[25]  Proceedings of the Royal Society (London) , 1906, Science.

[26]  N. Sottos,et al.  Fracture testing of a self-healing polymer composite , 2002 .

[27]  Hiroshi Yokoyama,et al.  Preparation of PCM microcapsules by using oil absorbable polymer particles , 2007 .

[28]  Nancy R. Sottos,et al.  Polydimethylsiloxane‐Based Self‐Healing Materials , 2006 .

[29]  M. Miura,et al.  Retention of a European pear aroma model mixture using different types of saccharides. , 2006, Journal of agricultural and food chemistry.

[30]  W. M. Haynes CRC Handbook of Chemistry and Physics , 1990 .

[31]  ScienceDirect,et al.  Composites science and technology , 1985 .

[32]  Scott R White,et al.  A new self-healing epoxy with tungsten (VI) chloride catalyst , 2008, Journal of The Royal Society Interface.

[33]  Nancy R. Sottos,et al.  Effect of microcapsule size on the performance of self-healing polymers , 2007 .

[34]  R. C. Weast CRC Handbook of Chemistry and Physics , 1973 .

[35]  Nancy R. Sottos,et al.  Nanocapsules for self-healing materials , 2008 .

[36]  Syed Sakhawat Shah,et al.  Colloids and Surfaces A , 1999 .

[37]  S. Ghosh Functional coatings : by polymer microencapsulation , 2006 .

[38]  J. Mcginity Journal of Microencapsulation , 2004, Clinical & Experimental Metastasis.

[39]  Li Yuan,et al.  Preparation and characterization of poly(urea-formaldehyde) microcapsules filled with epoxy resins , 2006 .

[40]  C. Tanford Macromolecules , 1994, Nature.

[41]  E. Mathiowitz,et al.  Polyamide microcapsules for controlled release. IV. Effects of swelling , 1989 .

[42]  C. Quan,et al.  Experimental Mechanics , 1881, Nature.

[43]  R. Rosenfeld Nature , 2009, Otolaryngology--head and neck surgery : official journal of American Academy of Otolaryngology-Head and Neck Surgery.

[44]  Nancy R. Sottos,et al.  Solvent-Promoted Self-Healing Epoxy Materials , 2007 .

[45]  Edward M. Petrie,et al.  Epoxy Adhesive Formulations , 2005 .

[46]  R. Wool Self-healing materials: a review. , 2008, Soft matter.

[47]  N. Sottos,et al.  Autonomic Healing of Epoxy Vinyl Esters via Ring Opening Metathesis Polymerization , 2008 .

[48]  Gustavo V. Barbosa-Cánovas,et al.  Fundamental aspects of controlled release in foods , 1995 .

[49]  N. Sottos,et al.  Autonomic healing of polymer composites , 2001, Nature.

[50]  W. M. Nelson Green solvents for chemistry : perspectives and practice , 2003 .

[51]  Tim A. Osswald,et al.  The History of Tomorrow's Materials : Protein-Based Biopolymers , 2008 .

[52]  Matthew J. Rosseinsky,et al.  Advanced Functional Materials , 2015, Materials Science Forum.

[53]  A. Kondō Microcapsule processing and technology , 1979 .

[54]  Nancy R. Sottos,et al.  Full Recovery of Fracture Toughness Using a Nontoxic Solvent‐Based Self‐Healing System , 2008 .