Synthesis and characterisation of novel fluorinated polymers bearing pendant imidazole groups and blend membranes: New materials for PEMFC operating at low relative humidity

A novel route to copolymers comprising a chlorotrifluorinated backbone and imidazole terminated pendant ethylene oxide groups has been developed for use of the resultant high molecular weight polymer as a component of proton conducting membranes in polymer electrolyte fuel cells. The synthesis route makes use of the radical initiated copolymerisation of chlorotrifluoroethylene (CTFE) with 2-chloroethylvinylether (CEVE). The resultant alternating copolymer retains vinyl side groups that are used in a second stage to graft 1-benzyl-2-(hydroxymethyl)imidazole, and the degree of grafting is controlled by the reactant ratios. Deprotection by hydrogenation generates pendant imidazole functions that are grafted through carbon, such as to leave available the –NH and –N– functions for participation in proton transfer. The polymer was subsequently used to form blend membranes with sulfonated poly(ether ether ketone) (sPEEK), and the ratio –NH/–SO3H varied between 1 and 100. Very low amounts of water (5–15 wt%) were taken up by the pure (non-blended) imidazole functionalised polymer membrane and even in the blend membranes water uptake remains remarkably low (<25 wt%) in membranes having an imidazole content ≥1 mmol g−1. The conductivity has been determined under a range of temperatures (25–120 °C) and relative humidities (25–100% RH). At 120 °C, the conductivity follows the trend of the content of grafted imidazole. Further, the dependence of conductivity on RH becomes significantly less marked as the grafted imidazole content increases, i.e. as the ratio NH/SO3H increases.

[1]  B. Améduri,et al.  Functional fluoropolymers for fuel cell membranes , 2005 .

[2]  Deborah J. Jones,et al.  Advances in the Development of Inorganic-Organic Membranes for Fuel Cell Applications , 2008 .

[3]  G. Wegner,et al.  PAA/imidazol-based proton conducting polymer electrolytes , 2003 .

[4]  I. Honma,et al.  Anhydrous proton conducting polymer electrolytes based on poly(vinylphosphonic acid)-heterocycle composite material , 2005 .

[5]  Deborah J. Jones,et al.  Non-Fluorinated Polymer Materials for Proton Exchange Membrane Fuel Cells , 2003 .

[6]  G. Wegner,et al.  Effects of different acid functional groups on proton conductivity of polymer-1,2,4-triazole blends , 2006 .

[7]  Deborah J. Jones,et al.  Synthesis and properties of new fluorinated polymers bearing pendant imidazole groups for fuel cell membranes operating over a broad relative humidity range , 2010 .

[8]  F. E. Karasz,et al.  The sodium salts of sulphonated poly(aryl-ether-ether-ketone) (PEEK): Preparation and characterization , 1987 .

[9]  B. Améduri,et al.  Synthesis and Modification of Alternating Copolymers Based on Vinyl Ethers, Chlorotrifluoroethylene, and Hexafluoropropylene† , 2009 .

[10]  K. Kreuer.  Membrane Materials for PEM-Fuel-Cells: A Microstructural Approach , 1995 .

[11]  G. Wegner,et al.  Anhydrous Polymeric Proton Conductors Based on Imidazole Functionalized Polysiloxane , 2006 .

[12]  J. Maier,et al.  New fully polymeric proton solvents with high proton mobility , 2003 .

[13]  S. Thayumanavan,et al.  Proton Conduction in 1H-1,2,3-triazole Polymers: Imidazole-Like or Pyrazole-Like? , 2010 .

[14]  Jedeok Kim,et al.  Anhydrous Proton-Conducting Properties of Nafion–1,2,4-Triazole and Nafion–Benzimidazole Membranes for Polymer Electrolyte Fuel Cells , 2007 .

[15]  J. Maier,et al.  About the Choice of the Protogenic Group in PEM Separator Materials for Intermediate Temperature, Low Humidity Operation: A Critical Comparison of Sulfonic Acid, Phosphonic Acid and Imidazole Functionalized Model Compounds , 2005 .

[16]  G. Wegner,et al.  Proton mobility in oligomer-bound proton solvents: imidazole immobilization via flexible spacers , 2001 .

[17]  K. Kreuer.  On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells , 2001 .

[18]  Meilin Liu,et al.  Synthesis and properties of imidazole-grafted hybrid inorganic–organic polymer membranes , 2006 .

[19]  J. Maier,et al.  Imidazole and pyrazole-based proton conducting polymers and liquids , 1998 .

[20]  S. Paddison,et al.  About the choice of the protogenic group in polymer electrolyte membranes: Ab initio modelling of sulfonic acid, phosphonic acid, and imidazole functionalized alkanes. , 2006, Physical chemistry chemical physics : PCCP.

[21]  Jürgen Garche,et al.  Encyclopedia of electrochemical power sources , 2009 .

[22]  M. Tuominen,et al.  Intrinsically proton conducting polymers and copolymers containing benzimidazole moieties: Glass transition effects , 2007 .

[23]  P. Flory,et al.  Molecular configuration and thermodynamic parameters from intrinsic viscosities , 1950 .

[24]  B. Améduri,et al.  New fluorinated polymers bearing pendant phosphonic groups for fuel cell membranes: Part 1 synthesis and characterizations of the fluorinated polymeric backbone , 2010 .

[25]  M. Hickner,et al.  Alternative polymer systems for proton exchange membranes (PEMs). , 2004, Chemical reviews.

[26]  P. Jannasch.  Recent developments in high-temperature proton conducting polymer electrolyte membranes , 2003 .

[27]  P. Jannasch,et al.  Intrinsically Proton-Conducting Benzimidazole Units Tethered to Polysiloxanes , 2005 .

[28]  M. Marrony,et al.  Multilayer Sulfonated Polyaromatic PEMFC Membranes , 2005 .