Robust Tolerance Design With the Integer Programming Approach

The quality loss function incorporates the cost of tolerances, however, it does not consider the manufacturing cost and design constraints. In this paper, a stochastic integer programming (SIP) approach is presented for simultaneous selection of tolerances and manufacturing processes. A direct link between the minimum manufacturing cost and the required level of manufacturing yield is established through the process capability index C pk . As the tolerances in SIP are discrete, the solution generated is acceptable for manufacturing. It is shown that the integer programming models are applicable in the quality loss function and six sigma design approaches. The SIP approach is illustrated with a classical example of nonlinear tolerance design. The comparison of the proposed SIP approach, the Taguchi method, and the conventional mathematical models in tolerance synthesis is presented.

[1]  Hong-Chao Zhang,et al.  Tolerancing techniques: the state-of-the-art , 1992 .

[2]  F. H. Speckhart,et al.  Calculation of Tolerance Based on a Minimum Cost Approach , 1972 .

[3]  Prabhakant Sinha,et al.  The Multiple-Choice Knapsack Problem , 1979, Oper. Res..

[4]  Angus Jeang,et al.  Tolerance design: Choosing optimal tolerance specifications in the design of machined parts , 1994 .

[5]  Ronald G. Askin,et al.  ECONOMIC OPTIMIZATION IN PRODUCT DESIGN , 1988 .

[6]  Douglass J. Wilde,et al.  Minimum Exponential Cost Allocation of Sure-Fit Tolerances , 1975 .

[7]  Nagraj Balakrishnan.  A MULTIPLE-CHOICE KNAPSACK MODEL FOR TOLERANCE ALLOCATION IN MECHANICAL ASSEMBLIES , 1993 .

[8]  W. H. Greenwood,et al.  Worst Case Tolerance Analysis with Nonlinear Problems , 1988 .

[9]  Andrew Kusiak,et al.  Robust Tolerance Design for Quality , 1996 .

[10]  David S. Johnson,et al.  Computers and Intractability: A Guide to the Theory of NP-Completeness , 1978 .

[11]  J. Huang,et al.  A Method for Optimal Tolerance Selection , 1977 .

[12]  L. F. Hauglund,et al.  Least Cost Tolerance Allocation for Mechanical Assemblies with Automated Process Selection , 1990 .

[13]  Kenneth W. Chase,et al.  A survey of research in the application of tolerance analysis to the design of mechanical assemblies , 1991 .

[14]  David H. Evans,et al.  Statistical Tolerancing: The State of the Art, Part I. Background , 1974 .

[15]  T. C. Woo,et al.  Optimum Selection of Discrete Tolerances , 1989 .

[16]  Kenneth W. Chase,et al.  Design Issues in Mechanical Tolerance Analysis , 1998 .

[17]  H. A. Elmaraghy,et al.  A Concurrent Engineering Approach To Robust Product Design , 1993 .

[18]  Earlwood T. Fortini.  Dimensioning for interchangeable manufacture , 1967 .

[19]  M. F. Spotts.  Allocation of Tolerances to Minimize Cost of Assembly , 1973 .