Numerical Simulations of Hollow-Cone Injection and Gasoline Compression Ignition Combustion With Naphtha Fuels
暂无分享,去创建一个
A. E. Elwardany | Hong G. Im | Jihad Badra | Yoann Viollet | Junseok Chang | Jaeheon Sim | Mohammed Jaasim | Amer Amer | H. Im | A. Amer | Junseok Chang | A. Elwardany | J. Badra | J. Sim | Yoann Viollet | M. Jaasim
[1] T. Brinck,et al. HCCI experiments with toluene reference fuels modeled by a semidetailed chemical kinetic model , 2008 .
[2] R. Reitz,et al. Turbulence Modeling of Internal Combustion Engines Using RNG κ-ε Models , 1995 .
[3] Rolf D. Reitz,et al. Operating a Heavy-Duty Direct-Injection Compression-Ignition Engine with Gasoline for Low Emissions , 2009 .
[4] Rolf D. Reitz,et al. Pressure-Swirl Atomization in the Near Field , 1999 .
[5] S. H. Jo,et al. Active Thermo-Atmosphere Combustion (ATAC) - A New Combustion Process for Internal Combustion Engines , 1979 .
[6] Mansour Al Qubeissi,et al. Modelling of biodiesel fuel droplet heating and evaporation , 2014 .
[7] Shuji Kimura,et al. New Combustion Concept for Ultra-Clean and High-Efficiency Small DI Diesel Engines , 1999 .
[8] Ming Jia,et al. Development of a New Skeletal Chemical Kinetic Model of Toluene Reference Fuel with Application to Gasoline Surrogate Fuels for Computational Fluid Dynamics Engine Simulation , 2013 .
[9] Erik Schünemann,et al. Potentials of the Spray-Guided BMW DI Combustion System , 2006 .
[10] D. Foster,et al. Compression-Ignited Homogeneous Charge Combustion , 1983 .
[11] Yukiyasu Tanaka,et al. A Study on Gasoline Engine Combustion by Observation of Intermediate Reactive Products during Combustion , 1979 .
[12] A. E. Elwardany,et al. A quasi-discrete model for heating and evaporation of complex multicomponent hydrocarbon fuel droplets , 2011 .
[13] P. Senecal,et al. Multi-Dimensional Modeling of Direct-Injection Diesel Spray Liquid Length and Flame Lift-off Length using CFD and Parallel Detailed Chemistry , 2003 .
[14] Christopher J. Rutland,et al. A new droplet collision algorithm , 2000 .
[15] A. Lefebvre. Gas Turbine Combustion , 1983 .
[16] Sergei Sazhin,et al. Droplets and Sprays , 2014 .
[17] Jihad Badra,et al. A Simple Method to Predict Knock Using Toluene, N-Heptane and Iso-Octane Blends (TPRF) as Gasoline Surrogates , 2015 .
[18] P. Senecal,et al. Modeling high-speed viscous liquid sheet atomization , 1999 .
[19] Stephen Ciatti,et al. Computational Fluid Dynamics Simulation of Gasoline Compression Ignition , 2015 .
[20] Bengt Johansson,et al. Characterization of Partially Premixed Combustion With Ethanol: EGR Sweeps, Low and Maximum Loads , 2010 .
[21] A. E. Elwardany,et al. A simplified model for bi-component droplet heating and evaporation , 2010 .
[22] Kenji Kawai,et al. Trial of New Concept Diesel Combustion System - Premixed Compression-Ignited Combustion - , 1999 .
[23] Rolf D. Reitz,et al. Numerical Parametric Study of Diesel Engine Operation with Gasoline , 2009 .
[24] John Abraham,et al. Modeling the outcome of drop–drop collisions in Diesel sprays , 2002 .
[25] R. Reitz,et al. Efficiency and Emissions performance of Multizone Stratified Compression Ignition Using Different Octane Fuels , 2013 .
[26] R. H. Thring,et al. Homogeneous-Charge Compression-Ignition (HCCI) Engines , 1989 .
[27] Bengt Johansson,et al. An Advanced Internal Combustion Engine Concept for Low Emissions and High Efficiency from Idle to Max Load Using Gasoline Partially Premixed Combustion , 2010 .
[28] A. A. Amsden,et al. KIVA-3V: A Block-Structured KIVA Program for Engines with Vertical or Canted Valves , 1997 .
[29] Yoann Viollet,et al. Enabling High Efficiency Direct Injection Engine with Naphtha Fuel through Partially Premixed Charge Compression Ignition Combustion , 2012 .
[30] Roger B. Krieger,et al. Gasoline DICI Engine Operation in the LTC Regime Using Triple- Pulse Injection , 2012 .
[31] Rolf D. Reitz,et al. Numerical Optimization of a Light-Duty Compression Ignition Engine Fuelled With Low-Octane Gasoline , 2012 .
[32] Bengt Johansson,et al. Gasoline partially premixed combustion, the future of internal combustion engines? , 2011 .
[33] P. K. Senecal,et al. A New Parallel Cut-Cell Cartesian CFD Code for Rapid Grid Generation Applied to In-Cylinder Diesel Engine Simulations , 2007 .
[34] Yoann Viollet,et al. Compression Ratio and Derived Cetane Number Effects on Gasoline Compression Ignition Engine Running with Naphtha Fuels , 2014 .
[35] Mansour Al Qubeissi,et al. A multi-dimensional quasi-discrete model for the analysis of Diesel fuel droplet heating and evaporation , 2014 .
[36] A. E. Elwardany,et al. New solutions to the species diffusion equation inside droplets in the presence of the moving boundary , 2012 .
[37] R. Reitz,et al. Structure of High-Pressure Fuel Sprays , 1987 .
[38] Bengt Johansson,et al. Partially Premixed Combustion at High Load using Gasoline and Ethanol, a Comparison with Diesel , 2009 .
[39] Reinhold Kneer,et al. EXPERIMENTAL INVESTIGATION OF NEAR NOZZLE SPRAY STRUCTURE AND VELOCITY FOR A GDI HOLLOWCONE SPRAY , 2010 .
[40] Bengt Johansson,et al. The Low Load Limit of Gasoline Partially Premixed Combustion Using Negative Valve Overlap , 2012 .
[41] Gautam Kalghatgi,et al. The outlook for fuels for internal combustion engines , 2014 .
[42] Gautam Kalghatgi,et al. Fuel/Engine Interactions , 2013 .
[43] Rolf D. Reitz,et al. MODELING ATOMIZATION PROCESSES OF PRESSURE-SWIRL HOLLOW-CONE FUEL SPRAYS , 1997 .
[44] Reinhold Kneer,et al. Combined Spray Model for Gasoline Direct Injection Hollow-Cone Sprays , 2010 .
[45] R. Reitz,et al. Modeling the effects of drop drag and breakup on fuel sprays. Technical paper , 1993 .
[46] Martin Tuner,et al. Large Eddy Simulation of Partially Premixed Combustion in an Internal Combustion Engine , 2012 .
[47] Yoann Viollet,et al. Fuel Economy Potential of Partially Premixed Compression Ignition (PPCI) Combustion with Naphtha Fuel , 2013 .