Developing high performance phosphogypsum-based cementitious materials for oil-well cementing through a step-by-step optimization method

[1]  J. Qian,et al.  Synthesis of belite sulfoaluminate-ternesite cements with phosphogypsum , 2015 .

[2]  Alaa M. Rashad,et al.  Potential use of phosphogypsum in alkali-activated fly ash under the effects of elevated temperatures and thermal shock cycles , 2015 .

[3]  Yan-Xing Wang,et al.  A novel Two-step Hydration Process of preparing cement-free non-fired bricks from waste phosphogypsum , 2014 .

[4]  K. Okada,et al.  Ion uptake properties of low-cost inorganic sorption materials in the CaO–Al2O3–SiO2 system prepared from phosphogypsum and kaolin , 2014 .

[5]  V. Zivica,et al.  Performance of G-Oil Well cement exposed to elevated hydrothermal curing conditions , 2014, Journal of Thermal Analysis and Calorimetry.

[6]  J. Qian,et al.  Calcium sulphoaluminate cements made with phosphogypsum: Production issues and material properties , 2014 .

[7]  Gajendra Kumar Jangid,et al.  Highly Reactive fly ash Material Improves Economics of Lightweight Cementing With Lower Carbon Footprint , 2013 .

[8]  Zhihua Hu,et al.  Utilization of phosphogypsum for the preparation of non-autoclaved aerated concrete , 2013 .

[9]  H. Soltanian,et al.  A NEW CEMENT ADDITIVE TO IMPROVE THE PHYSICAL PROPERTIES OF OIL WELL CEMENT AND TO ENHANCE ZONAL ISOLATION , 2013 .

[10]  R. Shweikani,et al.  The use of phosphogypsum in Syrian cement industry: Radiation dose to public , 2013 .

[11]  M.M.R.A. Lima,et al.  Effect of Phosphogypsum on the Clinkerization Temperature of Portland Cement Clincker , 2012 .

[12]  Mridul Garg,et al.  Environment hazard mitigation of waste gypsum and chalk: Use in construction materials , 2011 .

[13]  Ambarish Ghosh.  Compaction Characteristics and Bearing Ratio of Pond Ash Stabilized with Lime and Phosphogypsum , 2010 .

[14]  J. McCartney,et al.  Measurement of filtration effects on the transmissivity of geocomposite drains for phosphogypsum , 2010 .

[15]  Liping Ma,et al.  Reaction Mechanism and Kinetic Analysis of the Decomposition of Phosphogypsum via a Solid-State Reaction , 2010 .

[16]  Aurora López-Delgado,et al.  Environmental impact and management of phosphogypsum. , 2009, Journal of environmental management.

[17]  Bo Xiao,et al.  Preparation of load-bearing building materials from autoclaved phosphogypsum , 2009 .

[18]  Yang Min,et al.  Activation of fly ash–lime systems using calcined phosphogypsum , 2008 .

[19]  Nurhayat Degirmenci,et al.  Application of phosphogypsum in soil stabilization , 2007 .

[20]  Mingkai Zhou,et al.  Study on lime–fly ash–phosphogypsum binder , 2007 .

[21]  I. Othman,et al.  Impact of phosphate industry on the environment: a case study. , 2007, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[22]  S. Stoulos,et al.  The application of phosphogypsum in agriculture and the radiological impact. , 2006, Journal of environmental radioactivity.

[23]  A. King,et al.  A Multiphase Model for the Early Stages of the Hydration of Retarded Oilwell Cement , 2005 .

[24]  Yao Xiao.  Study on expandant of oil well cement (I) : Volume shrinkage and damage. , 2004 .

[25]  Freddy Jose Mata,et al.  Crosslinked Cements Solve Lost Circulation Problems , 2004 .

[26]  Ergun Kuru,et al.  Use of Cement As Lost Circulation Material - Field Case Studies , 2004 .

[27]  H. El-Hassan,et al.  Using a Novel Fiber Cement System to Control Lost Circulation: Case Histories from the Middle East and the Far East , 2003 .

[28]  P. Nawrocki,et al.  Why Oilwells Leak: Cement Behavior and Long-Term Consequences , 2000 .