An additively manufactured heat-resistant Al-Ce-Sc-Zr alloy: Microstructure, mechanical properties and thermal stability

[1]  Haiyan Gao,et al.  Orientation relationships and interface structure between Al11Ce3 and Al in Al-Ce eutectic , 2022, Journal of Materials Research and Technology.

[2]  D. Dunand,et al.  Comparing evolution of precipitates and strength upon aging of cast and laser-remelted Al-8Ce-0.2Sc-0.1Zr (wt.%). , 2022, Materials science & engineering. A, Structural materials : properties, microstructure and processing.

[3]  A. Plotkowski,et al.  A creep-resistant additively manufactured Al-Ce-Ni-Mn alloy , 2022, Acta Materialia.

[4]  B. McWilliams,et al.  High Strength Aluminum-Cerium Alloy Processed by Laser Powder Bed Fusion , 2022, Additive Manufacturing.

[5]  Zhi-gang Wang,et al.  Beneficial effects of Sc/Zr addition on hypereutectic Al–Ce alloys: Modification of primary phases and precipitation hardening , 2022, Materials Science and Engineering: A.

[6]  Chao Chen,et al.  Microstructure and mechanical property evolution of additive manufactured eutectic Al-2Fe alloy during solidification and aging , 2021, Journal of Alloys and Compounds.

[7]  H. Ji,et al.  Damage evolution of 7075 aluminum alloy basing the Gurson Tvergaard Needleman model under high temperature conditions , 2021, Journal of Materials Research and Technology.

[8]  Yunping Li,et al.  A high-strength heat-resistant Al−5.7Ni eutectic alloy with spherical Al3Ni nano-particles by selective laser melting , 2021 .

[9]  X. Chen,et al.  Enhanced thermal stability of precipitates and elevated-temperature properties via microalloying with transition metals (Zr, V and Sc) in Al–Cu 224 cast alloys , 2021, Materials Science and Engineering: A.

[10]  H. Ji,et al.  Research on High Temperature Stamping Forming Performance and Process Parameters Optimization of 7075 Aluminum Alloy , 2021, Materials.

[11]  D. Leonard,et al.  Elevated temperature ductility dip in an additively manufactured Al-Cu-Ce alloy , 2021, Acta Materialia.

[12]  Qian Xiao,et al.  Precipitation and micromechanical behavior of the coherent ordered nanoprecipitation strengthened Al-Cr-Fe-Ni-V high entropy alloy , 2021 .

[13]  H. Wei,et al.  Exploiting the rapid solidification potential of Laser Powder Bed Fusion in high strength and crack-free Al-Cu-Mg-Mn-Zr alloys , 2021 .

[14]  W. Ding,et al.  Effect of Zr and Sc micro-additions on the microstructure and mechanical properties of as-cast Al-5Ce alloy , 2021, Materials Science and Engineering: A.

[15]  S. Ringer,et al.  Correlation between precipitates evolution and mechanical properties of Al-Sc-Zr alloy with Er additions , 2021 .

[16]  S. Babu,et al.  Towards high-temperature applications of aluminium alloys enabled by additive manufacturing , 2021, International Materials Reviews.

[17]  Sheng-wu Guo,et al.  Improving creep resistance of Al-12 wt.% Ce alloy by microalloying with Sc , 2021, Scripta Materialia.

[18]  Z. Zhang,et al.  Theoretical and experimental study of precipitation and coarsening kinetics of θ′ phase in Al–Cu alloy , 2021, Vacuum.

[19]  Z. Lei,et al.  Microstructure, tensile properties and thermal stability of AlMgSiScZr alloy printed by laser powder bed fusion , 2021 .

[20]  Xin Lin,et al.  Laser-based directed energy deposition of novel Sc/Zr-modified Al-Mg alloys: columnar-to-equiaxed transition and aging hardening behavior , 2021, Journal of Materials Science & Technology.

[21]  Le Zhou,et al.  Additive manufacturing and mechanical properties of the dense and crack free Zr-modified aluminum alloy 6061 fabricated by the laser-powder bed fusion , 2021 .

[22]  K. Edalati,et al.  Developing age-hardenable Al-Zr alloy by ultra-severe plastic deformation: Significance of supersaturation, segregation and precipitation on hardening and electrical conductivity , 2021 .

[23]  George S. Kamaris,et al.  Aluminium alloys as structural material: A review of research , 2021, Engineering Structures.

[24]  M. Vedani,et al.  Development of a Novel High-Temperature Al Alloy for Laser Powder Bed Fusion , 2020, Metals.

[25]  D. Leonard,et al.  Microstructure and properties of additively manufactured Al–Ce–Mg alloys , 2020, Scientific Reports.

[26]  Yingang Liu,et al.  Effect of processing parameters on the densification of an additively manufactured 2024 Al alloy , 2020, Journal of Materials Science & Technology.

[27]  Yuanwei Sun,et al.  Microstructure and properties of novel Al-Ce-Sc, Al-Ce-Y, Al-Ce-Zr and Al-Ce-Sc-Y alloy conductors processed by die casting, hot extrusion and cold drawing , 2020 .

[28]  Guichuan Li,et al.  Investigation of Solidification and Precipitation Behavior of Si-Modified 7075 Aluminum Alloy Fabricated by Laser-Based Powder Bed Fusion , 2020, Metallurgical and Materials Transactions A.

[29]  Priyanka Agrawal,et al.  Additively manufactured novel Al-Cu-Sc-Zr alloy: Microstructure and mechanical properties , 2020 .

[30]  B. Shalchi Amirkhiz,et al.  On the Al–Al11Ce3 Eutectic Transformation in Aluminum–Cerium Binary Alloys , 2020, Materials.

[31]  A. Plotkowski,et al.  Microstructure and properties of a high temperature Al–Ce–Mn alloy produced by additive manufacturing , 2020 .

[32]  A. Plotkowski,et al.  An additively manufactured AlCuMnZr alloy microstructure and tensile mechanical properties , 2020 .

[33]  C. Kenel,et al.  Synthesis of precipitation-strengthened Al-Sc, Al-Zr and Al-Sc-Zr alloys via selective laser melting of elemental powder blends , 2020 .

[34]  B. McWilliams,et al.  Laser powder bed fusion of Al–10 wt% Ce alloys: microstructure and tensile property , 2020, Journal of Materials Science.

[35]  M. Weyland,et al.  Precipitation kinetics, microstructure evolution and mechanical behavior of a developed Al-Mn-Sc alloy fabricated by selective laser melting. , 2020, Acta materialia.

[36]  L.F. Cao,et al.  Assembling dual precipitates to improve high-temperature resistance of multi-microalloyed Al–Cu alloys , 2020 .

[37]  C. Leinenbach,et al.  Coarsening- and creep resistance of precipitation-strengthened Al–Mg–Zr alloys processed by selective laser melting , 2020 .

[38]  J. H. Chen,et al.  Structures and formation mechanisms of dislocation-induced precipitates in relation to the age-hardening responses of Al-Mg-Si alloys , 2020 .

[39]  Di Zhang,et al.  Interface-dominated mechanical behavior in advanced metal matrix composites , 2020 .

[40]  S. Thapliyal,et al.  An integrated computational materials engineering-anchored closed-loop method for design of aluminum alloys for additive manufacturing , 2020, Materialia.

[41]  D. Dunand,et al.  Cast near-eutectic Al-12.5 wt.% Ce alloy with high coarsening and creep resistance , 2019, Materials Science and Engineering: A.

[42]  J. Schoenung,et al.  Aluminum with dispersed nanoparticles by laser additive manufacturing , 2019, Nature Communications.

[43]  M. Aindow,et al.  Eutectic microstructures in dilute Al-Ce and Al-Co alloys , 2019, Materials Characterization.

[44]  Xinhua Wu,et al.  Selective laser melting of a high strength Al Mn Sc alloy: Alloy design and strengthening mechanisms , 2019, Acta Materialia.

[45]  B. Gault,et al.  On the origin of a remarkable increase in the strength and stability of an Al rich Al-Ni eutectic alloy by Zr addition , 2019, Acta Materialia.

[46]  Hao-wei Wang,et al.  Thermal stability of Al–Fe–Ni alloy at high temperatures , 2019, Journal of Materials Research and Technology.

[47]  D. Weiss.  Improved High-Temperature Aluminum Alloys Containing Cerium , 2019, Journal of Materials Engineering and Performance.

[48]  V. A. Korolev,et al.  Microstructure and Properties of Novel Heat Resistant Al–Ce–Cu Alloy for Additive Manufacturing , 2018, Metals and Materials International.

[49]  N. Uzan,et al.  High-temperature mechanical properties of AlSi10Mg specimens fabricated by additive manufacturing using selective laser melting technologies (AM-SLM) , 2018, Additive Manufacturing.

[50]  L. Murr,et al.  Processing and characterization of crack-free aluminum 6061 using high-temperature heating in laser powder bed fusion additive manufacturing , 2018, Additive Manufacturing.

[51]  C. Kenel,et al.  Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting , 2018, Acta Materialia.

[52]  P. Sanders,et al.  Composition dependent thermal stability and evolution of solute clusters in Al-Mg-Si analyzed using atom probe tomography , 2018 .

[53]  L. Chao,et al.  Coarsening Kinetics of Pb Phase in a Nanocomposite Alloy Produced by Mechanical Alloying in Immiscible Al-Pb System and the Influence of Cu Addition on It , 2017 .

[54]  Yan Chen,et al.  High performance aluminum–cerium alloys for high-temperature applications , 2017 .

[55]  T. Pollock,et al.  3D printing of high-strength aluminium alloys , 2017, Nature.

[56]  Zhanyong Zhao,et al.  A high-strength, ductile Al-0.35Sc-0.2Zr alloy with good electrical conductivity strengthened by coherent nanosized-precipitates , 2017 .

[57]  A. Wilkinson,et al.  Environmentally-assisted grain boundary attack as a mechanism of embrittlement in a nickel-based superalloy , 2017 .

[58]  Ryan R. Dehoff,et al.  Evaluation of an Al-Ce alloy for laser additive manufacturing , 2017 .

[59]  Ryan Wicker,et al.  Multiprocess 3D printing for increasing component functionality , 2016, Science.

[60]  Konda Gokuldoss Prashanth,et al.  Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting , 2016 .

[61]  C. Schuh,et al.  Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals , 2016 .

[62]  Zhaohui Huang,et al.  A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility , 2015 .

[63]  R. Poprawe,et al.  Rapid fabrication of Al-based bulk-form nanocomposites with novel reinforcement and enhanced performance by selective laser melting , 2015 .

[64]  E. Ma,et al.  Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility. , 2013, Nature materials.

[65]  J. Kruth,et al.  Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder , 2013 .

[66]  K. Higashi,et al.  First-principles studies on lattice constants and local lattice distortions in solid solution aluminum alloys , 2013 .

[67]  Christopher J. Sutcliffe,et al.  Selective laser melting of aluminium components , 2011 .

[68]  D. Seidman,et al.  Precipitation evolution in Al–0.1Sc, Al–0.1Zr and Al–0.1Sc–0.1Zr (at.%) alloys during isochronal aging , 2010 .

[69]  K. S. Rao,et al.  Microstructure and high temperature strength of age hardenable AA2219 aluminium alloy modified by Sc, Mg and Zr additions , 2009 .

[70]  D. Seidman,et al.  Criteria for developing castable, creep-resistant aluminum-based alloys – A review , 2006 .

[71]  A. K. Dahle,et al.  Eutectic Modification of Al-Si Alloys with Rare Earth Metals , 2004 .

[72]  Zhonghua Zhang,et al.  Microstructure selection map for rapidly solidified Al-rich Al Ce alloys , 2004 .

[73]  D. Seidman,et al.  Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys [Acta Materialia 50(16), pp. 4021–4035] , 2003 .

[74]  C. Weiping.  Diffusion of cerium in the aluminium lattice , 1997 .

[75]  J. Yeh,et al.  The coarsening of silicon particles in a submicron-grained layer-deposited Al-12wt% Si alloy , 1994 .

[76]  E. George,et al.  Brittle cleavage of L1_2 trialuminides , 1990 .

[77]  D. Skinner,et al.  Effect of strain rate on tensile ductility for a series of dispersion-strengthened aluminum-based alloys , 1989 .

[78]  R. Trivedi,et al.  Theory of eutectic growth under rapid solidification conditions , 1987 .

[79]  G. L. Liedl,et al.  Coarsening of δ′ (Al3Li) precipitates in an Al-2.8Li0.3Mn alloy , 1985 .

[80]  J. D. Boyd,et al.  The coarsening behaviour of θ″ and θ′ precipitates in two Al-Cu alloys , 1971 .

[81]  I. Lifshitz,et al.  The kinetics of precipitation from supersaturated solid solutions , 1961 .

[82]  A. Phillion,et al.  Revisiting solidification microstructure selection maps in the frame of additive manufacturing , 2020 .

[83]  F. Czerwinski.  Cerium in aluminum alloys , 2019, Journal of Materials Science.

[84]  B. McWilliams,et al.  Microstructure and tensile property of a novel AlZnMgScZr alloy additively manufactured by gas atomization and laser powder bed fusion , 2019, Scripta Materialia.

[85]  M. Walczak,et al.  Scanning pattern angle effect on the resulting properties of selective laser sintered monolayers of Cu-Sn-Ni powder , 2018 .

[86]  Shichen Li,et al.  The Influence of Composition on the Clustering and Precipitation Behavior of Al-Mg-Si-Cu Alloys , 2016, Metallurgical and Materials Transactions A.

[87]  Claus Emmelmann,et al.  Process and Mechanical Properties: Applicability of a Scandium modified Al-alloy for Laser Additive Manufacturing , 2011 .

[88]  D. Eskin.  Decomposition of supersaturated solid solutions in Al–Cu–Mg–Si alloys , 2002 .

[89]  J. Hunt,et al.  Lamellar and Rod Eutectic Growth , 1988 .

[90]  K. Prewo,et al.  On the strength of discontinuous silicon carbide reinforced aluminum composites , 1986 .

[91]  A. Ardell,et al.  Precipitation hardening , 1985 .