Increasing Doherty Amplifier Average Efficiency Exploiting Device Knee Voltage Behavior

This contribution presents the theoretical analysis and design guidelines to increase the average efficiency of a Doherty power amplifier (DPA), accounting for the device on-resistance. Starting from a simplified device model, closed-form equations for the estimation of both design parameters and obtainable performances are reported. Moreover, advantages and disadvantages of the approach are deeply investigated through a comparison with the standard implementation of a DPA, i.e., based on constant knee voltage behavior. Finally, as experimental support for the developed theoretical analysis, two X-band monolithic microwave integrated circuit DPAs, based on the same GaAs technology, have been designed, realized, and tested. The first one was based on the standard methodology, while the other one has been optimized exploiting the device knee voltage behavior. Measurement results validated the developed analysis, confirming what is theoretically expected for the main DPA features. In particular, both DPAs have 29 dBm of output power with 7.2 dB of power gain in 6 dB of output power back-off (OBO). The efficiency is larger than 35% for the standard DPA and 42% for the one designed exploiting the device on-resistance, in the same OBO region.

[1]  W.H. Doherty,et al.  A New High Efficiency Power Amplifier for Modulated Waves , 1936, Proceedings of the Institute of Radio Engineers.

[2]  Frederick Raab,et al.  Efficiency of Doherty RF Power-Amplifier Systems , 1987, IEEE Transactions on Broadcasting.

[3]  C. Weitzel,et al.  RF power amplifiers for wireless communications , 2002, 24th Annual Technical Digest Gallium Arsenide Integrated Circuit (GaAs IC) Symposiu.

[4]  Jangheon Kim,et al.  Optimum operation of asymmetrical-cells-based linear Doherty power Amplifiers-uneven power drive and power matching , 2005 .

[5]  Bumman Kim,et al.  Optimum operation of asymmetrical-cells-based linear Doherty power Amplifiers-uneven power drive and power matching , 2005, IEEE Transactions on Microwave Theory and Techniques.

[6]  M. Iwamoto,et al.  Linearity Improvement of HBT-Based Doherty Power Amplifiers Based on a Simple Analytical Model , 2006, IEEE Transactions on Microwave Theory and Techniques.

[7]  Steve C. Cripps,et al.  RF Power Amplifiers for Wireless Communications, Second Edition (Artech House Microwave Library (Hardcover)) , 2006 .

[8]  Bumman Kim,et al.  The Doherty Power Amplifier With On-Chip Dynamic Bias Control Circuit for Handset Application , 2007, IEEE Transactions on Microwave Theory and Techniques.

[9]  M. Steer.  Beyond 3G , 2007, IEEE Microwave Magazine.

[10]  J.W. Lee,et al.  Linearity Improved Doherty Power Amplifier Using Composite Right/Left-Handed Transmission Lines , 2008, IEEE Microwave and Wireless Components Letters.

[11]  Yong-Sub Lee,et al.  High-efficiency doherty amplifier using GaN HEMT class-F cells for WCDMA applications , 2008, 2008 International Conference on Microwave and Millimeter Wave Technology.

[12]  ColantonioPaolo,et al.  The AB-C Doherty power amplifier. Part I: Theory , 2009 .

[13]  Franco Giannini,et al.  The AB-C Doherty power amplifier. Part II: Validation , 2009 .

[14]  Franco Giannini,et al.  A design approach to increase gain feature of a Doherty Power Amplifier , 2009, 2009 European Microwave Integrated Circuits Conference (EuMIC).

[15]  P. Colantonio,et al.  Theory and Experimental Results of a Class F AB-C Doherty Power Amplifier , 2009, IEEE Transactions on Microwave Theory and Techniques.

[16]  Bumman Kim,et al.  A highly efficient Doherty power amplifier employing optimized carrier cell , 2009, 2009 European Microwave Conference (EuMC).

[17]  Jangheon Kim,et al.  Efficiency Enhancement of Doherty Amplifier Through Mitigation of the Knee Voltage Effect , 2011, IEEE Transactions on Microwave Theory and Techniques.