Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting

[1]  D. Apelian,et al.  Fatigue behavior of A356-T6 aluminum cast alloys. Part I. Effect of casting defects , 2001 .

[2]  H. Zhao,et al.  Weld metal composition change during conduction mode laser welding of aluminum alloy 5182 , 2001 .

[3]  Diran Apelian,et al.  Fatigue behavior of A356/357 aluminum cast alloys. Part II – Effect of microstructural constituents , 2001 .

[4]  C. Davidson,et al.  Oxide films, pores and the fatigue lives of cast aluminum alloys , 2006 .

[5]  R. Drew,et al.  Wetting of pure aluminum and selected alloys on polycrystalline alumina and sapphire , 2008 .

[6]  David W. Rosen,et al.  Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .

[7]  M. Tiryakioğlu.  On fatigue life variability in cast Al–10%Si–Mg alloys , 2010 .

[8]  J. Kruth,et al.  Part and material properties in selective laser melting of metals , 2010 .

[9]  G. Sigworth,et al.  Understanding Quality in Aluminum Castings , 2011 .

[10]  Christopher J. Sutcliffe,et al.  Selective laser melting of aluminium components , 2011 .

[11]  J. Kruth,et al.  Mechanical Properties of AlSi10Mg Produced by Selective Laser Melting , 2012 .

[12]  E. Brandl,et al.  Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior , 2012 .

[13]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[14]  Eleonora Atzeni,et al.  From Powders to Dense Metal Parts: Characterization of a Commercial AlSiMg Alloy Processed through Direct Metal Laser Sintering , 2013, Materials.

[15]  F. Calignano,et al.  Influence of process parameters on surface roughness of aluminum parts produced by DMLS , 2012, The International Journal of Advanced Manufacturing Technology.

[16]  J. Kruth,et al.  Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder , 2013 .

[17]  William E. Frazier,et al.  Metal Additive Manufacturing: A Review , 2014, Journal of Materials Engineering and Performance.

[18]  I. Ashcroft,et al.  Reducing porosity in AlSi10Mg parts processed by selective laser melting , 2014 .

[19]  Nachum Frage,et al.  Microstructure and Mechanical Properties of AlSi10Mg Parts Produced by the Laser Beam Additive Manufacturing (AM) Technology , 2014, Metallography, Microstructure, and Analysis.

[20]  Eleonora Atzeni,et al.  On the effect of process parameters on properties of AlSi10Mg parts produced by DMLS , 2014 .

[21]  GEOMETRIC MODEL TO PREDICT POROSITY OF PART PRODUCED IN POWDER BED SYSTEM , 2015 .

[22]  E. O. Olakanmi,et al.  A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties , 2015 .

[23]  F. Walther,et al.  Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting , 2015 .

[24]  Reinhart Poprawe,et al.  Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg , 2015 .

[25]  J.-P. Kruth,et al.  Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation , 2015 .

[26]  Wei Wang,et al.  Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development , 2015, Materials & Design (1980-2015).

[27]  Todd Palmer,et al.  Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing , 2015 .

[28]  Nesma T. Aboulkhair,et al.  Nano-hardness and microstructure of selective laser melted AlSi10Mg scan tracks , 2015, Other Conferences.

[29]  R. Hague,et al.  A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V , 2015, Metallurgical and Materials Transactions A.

[30]  S. Pannala,et al.  The metallurgy and processing science of metal additive manufacturing , 2016 .

[31]  J. Beuth,et al.  Rapid Solidification: Selective Laser Melting of AlSi10Mg , 2016, JOM.

[32]  David C. Joy,et al.  Scanning Electron Microscopy and X-Ray Microanalysis , 2017 .