Investigation of conductive and transparent Al-doped ZnO/metal dual-layer films by magnetron sputtering

Transparent conductive Al-doped ZnO (AZO)/metal (Ag or Cu) dual-layer films were deposited on glass substrates by direct current magnetron sputtering at room temperature. AZO layer thickness was about 30 nm. The thickness of Ag layer changed from 4.0 to 12.0 nm, and the thickness of Cu layer varied from 2.7 to 8.1 nm. The influence of metallic layer thickness on the structure, optical and electrical properties of dual-layer films was analyzed. Ag (111) crystalline peak was clearly observed in X-ray diffraction pattern as Ag layer thickness increases to 12.0 nm. For AZO/Cu films, besides the Cu crystalline peaks, there are copper oxide crystalline peaks. As Ag layer thickness increases from 4.0 to 12.0 nm, sheet resistance decreases from 6.37 to 3.91 Ω/sq and the average transmittance in the visible spectral region decreases from 83.7% to 72.6%, respectively. The average transmittance of AZO/Cu films with different Cu layer thicknesses is between 70.7% and 75.5%. The lowest sheet resistance is 19.2 Ω/sq when Cu layer thickness is 8.1 nm. The performance of the dual-layer films was also compared using a figure of merit. The results show that the high quality transparent and conductive films can be achieved by using AZO/metal dual-layer films.

[1]  J. Spreadborough,et al.  High-temperature X-ray diffractometer , 1959 .

[2]  G. Haacke.  New figure of merit for transparent conductors , 1976 .

[3]  Limei Lin,et al.  Influence of annealing in N2 on the properties of In2O3:Sn thin films prepared by direct current magnetron sputtering , 2007 .

[4]  H. Hashimoto,et al.  Electron‐microscopic study of the structure of metastable oxides formed in the initial stage of copper oxidation. II. Cu8O , 1984 .

[5]  M. A. Khadar,et al.  Evolution of nanostructure, phase transition and band gap tailoring in oxidized Cu thin films , 2008 .

[6]  Enric Bertran,et al.  RF sputtering deposition of Ag/ITO coatings at room temperature , 2003 .

[7]  Kalyan Kumar Chattopadhyay,et al.  Recent developments in the emerging field of crystalline p-type transparent conducting oxide thin films , 2005 .

[8]  Xiaohui Liu.  The design of ZnS/Ag/ZnS transparent conductive multilayer films , 2003 .

[9]  Chang Su Kim,et al.  Transparent organic light-emitting diodes consisting of a metal oxide multilayer cathode , 2008 .

[10]  Jow-Lay Huang,et al.  High quality transparent conductive ZnO/Ag/ZnO multilayer films deposited at room temperature , 2006 .

[11]  B. Rech,et al.  Texture etched ZnO:Al coated glass substrates for silicon based thin film solar cells , 1999 .

[12]  H. Derin,et al.  Optical characterization of thin thermal oxide films on copper by ellipsometry , 2002 .

[13]  Hailong Hu,et al.  Optical scattering characteristic of annealed niobium oxide films , 2005 .

[14]  H. Swanson,et al.  Standard X‐Ray Diffraction Powder Patterns , 1954 .

[15]  Y. Abe,et al.  Transparent conductive film having sandwich structure of gallium–indium-oxide/silver/gallium–indium-oxide , 2007 .

[16]  Shin-Yuan Lin,et al.  Deposition of Ag-based Al-doped ZnO multilayer coatings for the transparent conductive electrodes by electron beam evaporation , 2007 .

[17]  G. Exarhos,et al.  Discovery-based design of transparent conducting oxide films , 2007 .

[18]  N. Gregory.  Standard X-Ray Diffraction Powder Patterns , 1956 .

[19]  Limei Lin,et al.  Determination of optical constants and thicknesses of In2O3:Sn films from transmittance data , 2007 .