Strength and Leak Testing of Plasma Activated Bonded Interfaces

Abstract Bond strength and hermeticity of plasma activated bonded (PAB) Si–Si interfaces are reported. Bonding of 100 mm Si(1 0 0) wafers was performed. An average bond strength of 9.0±3.9 MPa was achieved without performing any annealing steps. Cavities bonded in vacuum were found to be hermetic based on detection of changes in membrane deflections. The detection limit for leak was 8E−13 mbar l/s. For comparison, strength and leak tests were also performed with regular fusion bonded wafers annealed at 1100 °C. The PAB was found to withstand post-processing steps such as RCA cleaning, 24 h in de-ionised water (DIW), 24 h in 2.5% HF, 24 h in acetone and 60 s in a resist developer. By analysing the thin silicon oxide present on the surfaces to be bonded with optical methods, the influence of pre-cleaning and activation process parameters was investigated.

[1]  J. Krüger,et al.  SOI by Silicon Wafer Direct Bonding - Problems of Wafer Warpage and Surface Chemistry , 1991 .

[2]  E. Beyne,et al.  The indent reflow sealing (IRS) technique-a method for the fabrication of sealed cavities for MEMS devices , 2000, Journal of Microelectromechanical Systems.

[3]  U. Gösele,et al.  Low temperature silicon direct bonding for application in micromechanics : bonding energies for different combinations of oxides , 1998 .

[4]  Werner Langheinrich,et al.  Application of oxygen plasma processing to silicon direct bonding , 1993 .

[5]  Q. Tong,et al.  Cool Plasma Activated Surface in Silicon Wafer Direct Bonding Technology , 1988, ESSDERC '88: 18th European Solid State Device Research Conference.

[6]  K. Hjort,et al.  Oxidation and Induced Damage in Oxygen Plasma In Situ Wafer Bonding , 2000 .

[7]  Stefan Bengtsson,et al.  Formation of Silicon Structures by Plasma‐Activated Wafer Bonding , 2000 .

[8]  S. Zafar,et al.  MEASUREMENT OF THE REFRACTIVE INDEX OF THIN SIO2 FILMS USING TUNNELING CURRENT OSCILLATIONS AND ELLIPSOMETRY , 1996 .

[9]  W. Maszara,et al.  Bonding of silicon wafers for silicon‐on‐insulator , 1988 .

[10]  G. Kissinger,et al.  Void-free silicon-wafer-bond strengthening in the 200–400 °C range , 1993 .

[11]  M. Reiche,et al.  Time‐Dependent Surface Properties and Wafer Bonding of O 2 ‐ Plasma ‐ Treated Silicon (100) Surfaces , 2000 .

[12]  B. Roberds,et al.  Chemical Free Room Temperature Wafer To Wafer Direct Bonding , 1995 .

[13]  Robert W. Bower,et al.  Low temperature direct bonding of non-hydrophilic surfaces , 1994 .