Cogging torque reduction in surface- mounted permanent magnet machines with nonuniform slot distributions

[1]  Z. Q. Zhu,et al.  Analytical cogging torque prediction for surface-mounted PM machines accounting for different slot sizes and uneven positions , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[2]  Z. Zhu,et al.  Influence of design parameters on cogging torque in permanent magnet machines , 1997 .

[3]  Lidija Petkovska,et al.  Cogging torque minimisation of PM synchronous motor using genetic algorithm , 2014 .

[4]  C. Espanet,et al.  Cogging torque evaluation through a magnetic field analytical computation in permanent magnet motors , 2009, 2009 International Conference on Electrical Machines and Systems.

[5]  Hao Feng,et al.  Optimization design of low-speed surface-mounted PMSM for pumping unit , 2014 .

[6]  C. Espanet,et al.  Analytical Solution of the Magnetic Field in Permanent-Magnet Motors Taking Into Account Slotting Effect: No-Load Vector Potential and Flux Density Calculation , 2009, IEEE Transactions on Magnetics.

[7]  Yang Shen,et al.  Analysis of Electromagnetic Performance of Halbach PM Brushless Machines Having Mixed Grade and Unequal Height of Magnets , 2013, IEEE Transactions on Magnetics.

[8]  T. Lipo,et al.  Analytical Solution for Cogging Torque in Surface Permanent-Magnet Motors Using Conformal Mapping , 2008, IEEE Transactions on Magnetics.

[9]  Juha Pyrhonen,et al.  Unequal Teeth Widths for Torque Ripple Reduction in Permanent Magnet Synchronous Machines With Fractional-Slot Non-Overlapping Windings , 2015, IEEE Transactions on Magnetics.

[10]  D. Staton,et al.  Analytical Model for Predicting Magnet Loss of Surface-Mounted Permanent Magnet Machines Accounting for Slotting Effect and Load , 2012, IEEE Transactions on Magnetics.

[11]  Z.J. Liu,et al.  Accurate Prediction of Magnetic Field and Magnetic Forces in Permanent Magnet Motors Using an Analytical Solution , 2008, IEEE Transactions on Energy Conversion.

[12]  Z. Zhu,et al.  An Accurate Subdomain Model for Magnetic Field Computation in Slotted Surface-Mounted Permanent-Magnet Machines , 2010, IEEE Transactions on Magnetics.

[13]  Zi-Qiang Zhu,et al.  Electrical Machines and Drives for Electric, Hybrid, and Fuel Cell Vehicles , 2007, Proceedings of the IEEE.

[14]  M. Carmeli,et al.  Electromagnetic vibration and noise analysis of an external rotor permanent magnet motor , 2006, International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006..

[15]  Sang-Yong Jung,et al.  Reducing Cogging Torque in Surface-Mounted Permanent-Magnet Motors by Nonuniformly Distributed Teeth Method , 2011, IEEE Transactions on Magnetics.

[16]  C. C. Chan,et al.  The state of the art of electric and hybrid vehicles , 2002, Proc. IEEE.

[17]  Byung-Taek Kim,et al.  Optimal design of shoe shape to reduce the cogging torque of SPMSM of two type of magnet , 2014 .

[18]  Z.Q. Zhu,et al.  Comparison of alternate analytical models for predicting cogging torque in surface-mounted permanent magnet machines , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[19]  Changliang Xia,et al.  Cogging Torque Modeling and Analyzing for Surface-Mounted Permanent Magnet Machines With Auxiliary Slots , 2013, IEEE Transactions on Magnetics.

[20]  D. Staton,et al.  An Improved Subdomain Model for Predicting Magnetic Field of Surface-Mounted Permanent Magnet Machines Accounting for Tooth-Tips , 2011, IEEE Transactions on Magnetics.