The effect of span-to-depth ratio on the impact bending strength of poplar LVL

[1]  Miroslav Gašparík,et al.  Influence of Densification on Bending Strength of Laminated Beech Wood , 2015 .

[2]  B. C. Bal.  Some physical and mechanical properties of reinforced laminated veneer lumber , 2014 .

[3]  B. C. Bal.  Flexural properties, bonding performance and splitting strength of LVL reinforced with woven glass fiber , 2014 .

[4]  E. Altuntaş,et al.  A comparative study on screw withdrawal strength of solid wood material and laminated veneer lumber. , 2013 .

[5]  I. Bektas,et al.  THE EFFECTS OF SOME FACTORS ON THE IMPACT BENDING STRENGTH OF LAMINATED VENEER LUMBER , 2012 .

[6]  M. Cil,et al.  EFFECTS OF PRESS PRESSURES ON GLUE LINE THICKNESS AND PROPERTIES OF LAMINATED VENEER LUMBER GLUED WITH PHENOL FORMALDEHYDE ADHESIVE , 2012 .

[7]  M. C. Kiran,et al.  Effect of span depth ratio on the bending properties of plywood , 2012, Journal of the Indian Academy of Wood Science.

[8]  R. Bajramović,et al.  EXAMINATION OF PROPER SPAN/DEPTH RATIO RANGE IN MEASURING THE BENDING STRENGTH OF WOOD BASED ON THE ELEMENTARY BENDING THEORY , 2011 .

[9]  P. Bekhta,et al.  Effect of pre-pressing of veneer on the glueability and properties of veneer-based products , 2010, European Journal of Wood and Wood Products.

[10]  R. Kurt.  Suitability of three hybrid poplar clones for laminated veneer lumber manufacturing using melamine urea formaldehyde adhesive , 2010, BioResources.

[11]  N. Yunus,et al.  Evaluation on the suitability of some adhesives for laminated veneer lumber from oil palm trunks , 2009 .

[12]  Ayhan Özçifçi,et al.  The effects of pilot hole, screw types and layer thickness on the withdrawal strength of screws in laminated veneer lumber , 2009 .

[13]  S. R. Shukla,et al.  Properties of laboratory made yellow poplar (Liriodendron tulipifera) laminated veneer lumber: effect of the adhesives , 2009, European Journal of Wood and Wood Products.

[14]  A. Steffen,et al.  Study of the relationship between flatwise and edgewise modull of elasticity of sawn timber as a means to improve mechanical strength grading technology , 1997, Holz als Roh- und Werkstoff.

[15]  S. R. Shukla,et al.  Properties of laminated veneer lumber (LVL) made with low density hardwood species: effect of the pressure duration , 2008, Holz als Roh- und Werkstoff.

[16]  Gülser Çelebi,et al.  Nail and screw withdrawal strength of laminated veneer lumber made up hardwood and softwood layers , 2007 .

[17]  I. Aydin,et al.  Effects of logs steaming, veneer drying and aging on the mechanical properties of laminated veneer lumber (LVL) , 2007 .

[18]  B. Wang,et al.  Hot-pressing stress graded aspen veneer for laminated veneer lumber (LVL) , 2005 .

[19]  Cenk Demirkir,et al.  Some Technological Properties of Laminated Veneer Lumber Manufactured from Pine (Pinus sylvestris L.) Veneers with Melamine Added - UF Resins , 2004 .

[20]  Hiroshi Yoshihara,et al.  Influence of span/depth ratio on the measurement of mode II fracture toughness of wood by end-notched flexure test , 2001, Journal of Wood Science.

[21]  Francisco Antonio Rocco Lahr,et al.  Use of Brazilian eucalyptus to produce LVL panels , 2004 .

[22]  E. T. Choong,et al.  Contribution factor of wood properties of three poplar clones to strength of laminated veneer lumber , 2001 .

[23]  S. Bukowski,et al.  Toughness properties for several composite lumber materials. , 2000 .

[24]  B. Ozarska,et al.  A review of the utilisation of hardwoods for LVL , 1999, Wood Science and Technology.

[25]  H. J. Zhang,et al.  Effects of resin impregnation and process parameters on some properties of poplar LVL , 1994 .

[26]  Jozsef Bodig,et al.  Mechanics of Wood and Wood Composites , 1982 .

[27]  W. Cǒté,et al.  Principles of Wood Science and Technology: I Solid Wood , 1977 .

[28]  John T. Drow,et al.  Results of impact tests to compare the pendulum impact and toughness test methods , 1965 .

[29]  Marcel Monnin.  Essais physiques, statiques et dynamiques des bois , 1919 .