Role of thermal ionization in internal modification of bulk borosilicate glass with picosecond laser pulses at high repetition rates

We study the roles of thermal ionization and electronic damage in the internal modification of bulk borosilicate glass by high repetition rate picosecond laser pulses. Laser-induced plasma generation, nonlinear energy deposition and steady temperature distribution are numerically analyzed. The simulated modified regions show good agreement with the experimental results, thereby revealing the roles of thermal damage and electronic damage in the internal modification. While the elliptical outer structure is recognized as the molten region, we found that the teardrop-shaped inner structure is the damaged zone caused by high-density free-electrons. In the formation of the inner structure, cascade ionization is seeded by thermal ionization instead of multi-photon ionization and dramatically increases the free-electron density to the damage threshold. The contour of the inner structure is found to be corresponding to a characteristic isotherm of around 3000 ~4000 °C.

[1]  Masaaki Sakakura,et al.  Temperature distribution and modification mechanism inside glass with heat accumulation during 250 kHz irradiation of femtosecond laser pulses , 2008 .

[2]  Koji Sugioka,et al.  Efficient microwelding of glass substrates by ultrafast laser irradiation using a double-pulse train. , 2011, Optics letters.

[3]  Michael Schmidt,et al.  Crack-free conditions in welding of glass by ultrashort laser pulse. , 2013, Optics express.

[4]  F. Yoshino,et al.  Micromachining with a High Repetition Rate Femtosecond Fiber Laser , 2008 .

[5]  Michael Schmidt,et al.  Evaluation of nonlinear absorptivity in internal modification of bulk glass by ultrashort laser pulses. , 2011, Optics express.

[6]  Jörg Krüger,et al.  Femtosecond laser-induced periodic surface structures on silica , 2012 .

[7]  Urs Eppelt,et al.  Numerical analysis of laser ablation and damage in glass with multiple picosecond laser pulses. , 2013, Optics express.

[8]  Fumiyo Yoshino,et al.  Heat accumulation effects in femtosecond laser-written waveguides with variable repetition rate. , 2005, Optics express.

[9]  A. Couairon,et al.  Femtosecond filamentation in transparent media , 2007 .

[10]  K. Sugioka,et al.  Characterization and mechanism of glass microwelding by double-pulse ultrafast laser irradiation. , 2012, Optics express.

[11]  Michael Schmidt,et al.  Characteristics of laser absorption and welding in FOTURAN glass by ultrashort laser pulses. , 2011, Optics express.

[12]  Roberto Osellame,et al.  Optical properties of waveguides written by a 26 MHz stretched cavity Ti:sapphire femtosecond oscillator. , 2005, Optics express.

[13]  D. Mathur,et al.  Pattern formation in transparent media using ultrashort laser pulses , 2013 .

[14]  Ranka,et al.  Observation of Pulse Splitting in Nonlinear Dispersive Media. , 1996, Physical review letters.

[15]  Perry,et al.  Nanosecond-to-femtosecond laser-induced breakdown in dielectrics. , 1996, Physical review. B, Condensed matter.

[16]  E. Mazur,et al.  Micromachining bulk glass by use of femtosecond laser pulses with nanojoule energy. , 2001, Optics letters.

[17]  E. Mazur,et al.  Femtosecond laser micromachining in transparent materials , 2008 .

[18]  Kazuyoshi Itoh,et al.  Energy-dependent temperature dynamics in femtosecond laser microprocessing clarified by Raman temperature measurement , 2012, Other Conferences.

[19]  Eric Mazur,et al.  Micromachining of bulk glass with bursts of femtosecond laser pulses at variable repetition rates. , 2006, Optics express.

[20]  Masaaki Sakakura,et al.  Three-dimensional temperature distribution and modification mechanism in glass during ultrafast laser irradiation at high repetition rates. , 2012, Optics express.

[21]  Stephen Ho,et al.  Transition from thermal diffusion to heat accumulation in high repetition rate femtosecond laser writing of buried optical waveguides. , 2008, Optics express.

[22]  M. Withford,et al.  Femtosecond laser direct-writing of waveguide Bragg gratings in a quasi cumulative heating regime. , 2011, Optics express.

[23]  A. Vogel,et al.  Mechanisms of femtosecond laser nanosurgery of cells and tissues , 2005 .

[24]  Jens Gottmann,et al.  In-situ diagnostics on fs-laser-induced modification of glasses for selective etching , 2012, Other Conferences.

[25]  R. Graf,et al.  Pearl-chain waveguides written at megahertz repetition rate , 2007 .

[26]  Razvan Stoian,et al.  Spatial distribution of refractive index variations induced in bulk fused silica by single ultrashort and short laser pulses , 2007 .

[27]  Yves Bellouard,et al.  Femtosecond-laser generation of self-organized bubble patterns in fused silica. , 2011, Optics express.

[28]  K. Itoh,et al.  Laser micro-welding of transparent materials by a localized heat accumulation effect using a femtosecond fiber laser at 1558 nm. , 2006, Optics express.

[29]  A. Couairon,et al.  Femtosecond laser-induced damage and filamentary propagation in fused silica. , 2002, Physical review letters.