论文信息 - Modeling of dilution jet flowfields

Modeling of dilution jet flowfields

The present paper will compare temperature field measurements from selected cases in these investigations with distributions calculated with an empirical model based on assumed vertical profile similarity and superposition and with a 3-D elliptic code using a standard K-E turbulence model. The results will show the capability (or lack thereof) of the models to predict the effects of the principle flow and geometric variables.

R. Srinivasan | J. D. Holdeman

[1] Modeling dilution of jet flowfields , 1986 .

[2] J. Whitelaw,et al. Experimental investigation of opposed jets discharging normally into a cross-stream , 1982, Journal of Fluid Mechanics.

[3] D. Spalding,et al. A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows , 1972 .

[4] D. L. Kors,et al. Mixing of multiple dilution jets with a hot primary airstream for gas turbine combustors , 1973 .

[5] D. B. Spalding,et al. A computer model for three-dimensional flow in furnaces , 1973 .

[6] J. D. Holdeman,et al. Perspectives on the mixing of a row of jets with a confined crossflow , 1977 .

[7] B. Noll,et al. Temperature Profile Development in Turbulent Mixing of Coolant Jets With a Confined Hot Cross Flow , 1983 .

[8] R. Claus. Analytical calculation of a single jet in cross-flow and comparison with experiment , 1983 .

[9] J. D. Holdeman. On the mixing of a row of jets with a confined crossflow , 1977 .

[10] Y. Kamotani,et al. Experiments on confined turbulent jets in cross flow. , 1973 .

[11] R. Srinivasan,et al. Experiments in Dilution Jet Mixing , 1984 .