Incorporation of Biochar to Improve Mechanical, Thermal and Electrical Properties of Polymer Composites

The strive for utilization of green fillers in polymer composite has increased focus on application of natural biomass-based fillers. Biochar has garnered a lot of attention as a filler material and has the potential to replace conventionally used inorganic mineral fillers. Biochar is a carbon rich product obtained from thermochemical conversion of biomass in nitrogen environment. In this review, current studies dealing with incorporation of biochar in polymer matrices as a reinforcement and conductive filler were addressed. Each study mentioned here is nuanced, while addressing the same goal of utilization of biochar as a filler. In this review paper, an in-depth analysis of biochar and its structure is presented. The paper explored the various methods employed in fabrication of the biocomposites. A thorough review on the effect of addition of biochar on the overall composite properties showed immense promise in improving the overall composite properties. An analysis of the possible knowledge gaps was also done, and improvements were suggested. Through this study we tried to present the status of application of biochar as a filler material and its potential future applications.

[1]  V. Bertolino,et al.  Polysaccharides/Halloysite nanotubes for smart bionanocomposite materials. , 2020, Carbohydrate polymers.

[2]  G. Cavallaro,et al.  Halloysite Nanotubes Coated by Chitosan for the Controlled Release of Khellin , 2020, Polymers.

[3]  M. U. Khan,et al.  Green-composites produced from waste residue in pulp and paper industry: A sustainable way to manage industrial wastes , 2020 .

[4]  Yong Guo,et al.  Low Water Absorption, High-Strength Polyamide 6 Composites Blended with Sustainable Bamboo-Based Biochar , 2020, Nanomaterials.

[5]  A. Tagliaferro,et al.  Electrical conductivity of wood biochar monoliths and its dependence on pyrolysis temperature , 2020, Biochar.

[6]  M. U. Khan,et al.  Production of high-density polyethylene biocomposites from rice husk biochar: Effects of varying pyrolysis temperature. , 2020, The Science of the total environment.

[7]  M. Bartoli,et al.  Influence of pyrolytic thermal history on olive pruning biochar and related epoxy composites mechanical properties , 2020 .

[8]  Weiming Yi,et al.  Properties evaluation of biochar/high-density polyethylene composites: Emphasizing the porous structure of biochar by activation. , 2020, The Science of the total environment.

[9]  H. Lei,et al.  Improvement on the properties of microcrystalline cellulose/polylactic acid composites by using activated biochar , 2020 .

[10]  G. Malucelli,et al.  Poly(lactic Acid)–Biochar Biocomposites: Effect of Processing and Filler Content on Rheological, Thermal, and Mechanical Properties , 2020, Polymers.

[11]  Wenyu Lu,et al.  Biochar filled high-density polyethylene composites with excellent properties: Towards maximizing the utilization of agricultural wastes , 2020 .

[12]  Ahmed Koubaa,et al.  Effect of the Pyro-Gasification Temperature of Wood on the Physical and Mechanical Properties of Biochar-Polymer Biocomposites , 2020, Materials.

[13]  A. Tomczyk,et al.  Biochar physicochemical properties: pyrolysis temperature and feedstock kind effects , 2020, Reviews in Environmental Science and Bio/Technology.

[14]  V. Arumugaprabu,et al.  Mechanical property analysis of biochar derived from cashew nut shell waste reinforced polymer matrix , 2020, Materials Research Express.

[15]  M. Bartoli,et al.  Development of Coffee Biochar Filler for the Production of Electrical Conductive Reinforced Plastic , 2019, Polymers.

[16]  V. Thakur,et al.  Manufacturing and characterization of sustainable hybrid composites using sisal and hemp fibres as reinforcement of poly (lactic acid) via injection moulding , 2019, Industrial Crops and Products.

[17]  Saowanee Wijitkosum,et al.  Elemental Composition of Biochar Obtained from Agricultural Waste for Soil Amendment and Carbon Sequestration , 2019, Applied Sciences.

[18]  G. Ferreira,et al.  Tuning Sugarcane Bagasse Biochar into a Potential Carbon Black Substitute for Polyethylene Composites , 2019, Journal of Polymers and the Environment.

[19]  Weiming Yi,et al.  Effects of alkali and alkaline earth metals on the co-pyrolysis of cellulose and high density polyethylene using TGA and Py-GC/MS , 2019, Fuel Processing Technology.

[20]  Carlo Rosso,et al.  Influence of Commercial Biochar Fillers on Brittleness/Ductility of Epoxy Resin Composites , 2019, Applied Sciences.

[21]  J. Tjong,et al.  Porous graphitic biocarbon and reclaimed carbon fiber derived environmentally benign lightweight composites. , 2019, The Science of the total environment.

[22]  Saeed M. Al-Zahrani,et al.  Effect of Pyrolysis Temperature on Biochar Microstructural Evolution, Physicochemical Characteristics, and Its Influence on Biochar/Polypropylene Composites , 2019, Applied Sciences.

[23]  N. Pugno,et al.  Biochar as a cheap and environmental friendly filler able to improve polymer mechanical properties , 2019, Biomass and Bioenergy.

[24]  K. Sheng,et al.  Fabrication and reinforcement of ternary composites based on polypropylene matrix with bamboo particle/ultrafine bamboo‐char , 2018 .

[25]  L. Turng,et al.  Highly filled biochar/ultra-high molecular weight polyethylene/linear low density polyethylene composites for high-performance electromagnetic interference shielding , 2018, Composites Part B: Engineering.

[26]  Shaik Jeelani,et al.  Three-Dimensional-Printed Sustainable Biochar-Recycled PET Composites , 2018, ACS Sustainable Chemistry & Engineering.

[27]  Daniel C W Tsang,et al.  Date palm biochar-polymer composites: An investigation of electrical, mechanical, thermal and rheological characteristics. , 2018, The Science of the total environment.

[28]  S. Zhang,et al.  Polypropylene biocomposites reinforced with bamboo particles and ultrafine bamboo‐char: The effect of blending ratio , 2018 .

[29]  M. Misra,et al.  Long-term performance of β-nucleated toughened polypropylene-biocarbon composites , 2018 .

[30]  P. Savi,et al.  Low-Cost Carbon Fillers to Improve Mechanical Properties and Conductivity of Epoxy Composites , 2017, Polymers.

[31]  Qingfa Zhang,et al.  The Dynamic Mechanical Analysis of Highly Filled Rice Husk Biochar/High-Density Polyethylene Composites , 2017, Polymers.

[32]  Ki-Hyun Kim,et al.  Biochar as a Catalyst , 2017 .

[33]  M. Misra,et al.  Compatibilization of toughened polypropylene/biocarbon biocomposites: A full factorial design optimization of mechanical properties , 2017 .

[34]  Emmanuel O. Ogunsona,et al.  Impact of interfacial adhesion on the microstructure and property variations of biocarbons reinforced nylon 6 biocomposites , 2017 .

[35]  M. Misra,et al.  Sustainable biocarbon from pyrolyzed perennial grasses and their effects on impact modified polypropylene biocomposites , 2017 .

[36]  D. Kirk,et al.  Preliminary investigation of electrical conductivity of monolithic biochar , 2017 .

[37]  Emmanuel O. Ogunsona,et al.  Sustainable biocomposites from biobased polyamide 6,10 and biocarbon from pyrolyzed miscanthus fibers , 2017 .

[38]  A. Dufresne,et al.  Utilization of Torrefied Coffee Grounds as Reinforcing Agent To Produce High-Quality Biodegradable PBAT Composites for Food Packaging Applications , 2017 .

[39]  Scott Renneckar,et al.  Dynamic mechanical analysis of layer-by-layer cellulose nanocomposites , 2016 .

[40]  D. Bhattacharyya,et al.  A parametric study of mechanical and flammability properties of biochar reinforced polypropylene composites , 2016 .

[41]  D. Bhattacharyya,et al.  Mechanical and flammability characterisations of biochar/polypropylene biocomposites , 2016 .

[42]  M. Rabello,et al.  Crystallization of PHB/Carbon black compounds. Effect of heating and cooling cycles , 2016 .

[43]  M. Misra,et al.  Biocomposites with Size-Fractionated Biocarbon: Influence of the Microstructure on Macroscopic Properties , 2016, ACS omega.

[44]  D. DeVallance,et al.  Investigation of hardwood biochar as a replacement for wood flour in wood–polypropylene composites , 2016 .

[45]  Xiaoyan Li,et al.  Development of electrically conductive nano bamboo charcoal/ultra-high molecular weight polyethylene composites with a segregated network , 2016 .

[46]  D. Bhattacharyya,et al.  Sustainable eco–composites obtained from waste derived biochar: a consideration in performance properties, production costs, and environmental impact , 2016 .

[47]  M. Sawangphruk,et al.  New Routes to Functionalize Carbon Black for Polypropylene Nanocomposites. , 2016, Langmuir : the ACS journal of surfaces and colloids.

[48]  A. V. Machado,et al.  The role of shear and stabilizer on PLA degradation , 2016 .

[49]  D. Bhattacharyya,et al.  Characterisation of waste derived biochar added biocomposites: chemical and thermal modifications. , 2016, The Science of the total environment.

[50]  S. Vivekanandhan,et al.  Oxidative acid treatment and characterization of new biocarbon from sustainable Miscanthus biomass. , 2016, The Science of the total environment.

[51]  D. Bhattacharyya,et al.  Nanoindentation assisted analysis of biochar added biocomposites , 2016 .

[52]  Jingxin Wang,et al.  The effect of bio-carbon addition on the electrical, mechanical, and thermal properties of polyvinyl alcohol/biochar composites , 2016 .

[53]  D. Bhattacharyya,et al.  Biocomposites from waste derived biochars: Mechanical, thermal, chemical, and morphological properties. , 2016, Waste management.

[54]  K. Shen,et al.  Effect of different morphologies on the creep behavior of high-density polyethylene , 2016 .

[55]  Emmanuel O. Ogunsona,et al.  Mechanical, Chemical, and Physical Properties of Wood and Perennial Grass Biochars for Possible Composite Application , 2015 .

[56]  D. Bhattacharyya,et al.  Structure-mechanics property relationship of waste derived biochars. , 2015, The Science of the total environment.

[57]  Oisik Das,et al.  Mechanism of waste biomass pyrolysis: Effect of physical and chemical pre-treatments. , 2015, The Science of the total environment.

[58]  Xiaoyan Li,et al.  Three kinds of charcoal powder reinforced ultra-high molecular weight polyethylene composites with excellent mechanical and electrical properties , 2015 .

[59]  Hao Wang,et al.  Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles , 2015 .

[60]  Amgad Elgowainy,et al.  Impacts of Vehicle Weight Reduction via Material Substitution on Life-Cycle Greenhouse Gas Emissions. , 2015, Environmental science & technology.

[61]  E. Fortunati,et al.  Effect of processing conditions and lignin content on thermal, mechanical and degradative behavior of lignin nanoparticles/polylactic (acid) bionanocomposites prepared by melt extrusion and solvent casting , 2015 .

[62]  D. Bhattacharyya,et al.  A novel approach in organic waste utilization through biochar addition in wood/polypropylene composites. , 2015, Waste management.

[63]  Mario Miscuglio,et al.  Investigation of epoxy resin/multiwalled carbon nanotube nanocomposite behavior at low frequency , 2015 .

[64]  Dagang Li,et al.  Electrically conductive charcoal powder/ultrahigh molecular weight polyethylene composites , 2014 .

[65]  M. H. Yahya,et al.  RF characterization of polymer multi-walled carbon nanotube composites , 2014, 2014 IEEE Conference on Antenna Measurements & Applications (CAMA).

[66]  M. Macêdo,et al.  Mechanical properties of epoxy resin based on granite stone powder from the Sergipe fold-and-thrust belt composites , 2014 .

[67]  H. Pang,et al.  Electromagnetic interference shielding of segregated polymer composite with an ultralow loading of in situ thermally reduced graphene oxide , 2014, Nanotechnology.

[68]  M. H. Yahya,et al.  Analysis of MWCNT/epoxy composites at microwave frequency: reproducibility investigation , 2014, Nanoscale Research Letters.

[69]  Yihe Zhang,et al.  Effect of Bamboo Charcoal Powder on the Curing Characteristics, Mechanical Properties, and Thermal Properties of Styrene-Butadiene Rubber with Bamboo Charcoal Powder , 2013 .

[70]  Bingjie Wang,et al.  Electrostatic adsorption method for preparing electrically conducting ultrahigh molecular weight polyethylene/graphene nanosheets composites with a segregated network , 2013 .

[71]  A. Delogu,et al.  Microwave absorption properties in epoxy resin Multi Walled Carbon Nanotubes composites , 2013, 2013 International Conference on Electromagnetics in Advanced Applications (ICEAA).

[72]  Qinglin Wu,et al.  High Density Polyethylene Composites Reinforced with Hybrid Inorganic Fillers: Morphology, Mechanical and Thermal Expansion Performance , 2013, Materials.

[73]  K. Kurzydłowski,et al.  The effect of carbon nanotubes on epoxy matrix nanocomposites , 2013, Journal of Thermal Analysis and Calorimetry.

[74]  A. Błędzki,et al.  Biocomposites reinforced with natural fibers: 2000–2010 , 2012 .

[75]  Nabarun Roy,et al.  Modifications of carbon for polymer composites and nanocomposites , 2012 .

[76]  H. Pang,et al.  Composites of Ultrahigh-Molecular-Weight Polyethylene with Graphene Sheets and/or MWCNTs with Segregated Network Structure: Preparation and Properties , 2012 .

[77]  K. Chrissafis,et al.  Can nanoparticles really enhance thermal stability of polymers? Part I: An overview on thermal decomposition of addition polymers , 2011 .

[78]  W. Lai,et al.  Enhanced electrical conductivity of nylon 6 composite using polyaniline-coated multi-walled carbon nanotubes as additives , 2011 .

[79]  K. Pielichowski,et al.  Crystallization behaviour of PEO with carbon-based nanonucleants for thermal energy storage , 2010 .

[80]  H. Khalil,et al.  Exploring biomass based carbon black as filler in epoxy composites: Flexural and thermal properties , 2010 .

[81]  P. Nico,et al.  Dynamic molecular structure of plant biomass-derived black carbon (biochar). , 2010, Environmental science & technology.

[82]  Ignace Verpoest,et al.  Influence of carbon nanotube reinforcement on the processing and the mechanical behaviour of carbon fiber/epoxy composites , 2009 .

[83]  J. Jellison,et al.  Significance of the heating rate on the physical properties of carbonized maple wood , 2008 .

[84]  Y. Mai,et al.  Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites , 2008 .

[85]  Jie-feng Gao,et al.  CNTs/ UHMWPE composites with a two-dimensional conductive network , 2008 .

[86]  Maya Jacob John,et al.  Biofibres and Biocomposites , 2008 .

[87]  Dimitrios N. Bikiaris,et al.  Characterization and thermal degradation mechanism of isotactic polypropylene/carbon black nanocomposites , 2007 .

[88]  Y. Zuo,et al.  Morphology, hydrogen-bonding and crystallinity of nano-hydroxyapatite/polyamide 66 biocomposites , 2007 .

[89]  H. Wagner,et al.  The role of surfactants in dispersion of carbon nanotubes. , 2006, Advances in colloid and interface science.

[90]  O. Paris,et al.  Mechanical properties of pyrolysed wood: a nanoindentation study , 2006 .

[91]  Ping Wang,et al.  Temperature dependence of electrical resistivity for carbon black filled ultra-high molecular weight polyethylene composites prepared by hot compaction , 2005 .

[92]  M. Knite,et al.  Polyisoprene-carbon black nanocomposites as tensile strain and pressure sensor materials , 2004 .

[93]  J. Vlachopoulos,et al.  Polymer processing , 2003 .

[94]  J. Bai,et al.  Effect of the length and the aggregate size of MWNTs on the improvement efficiency of the mechanical and electrical properties of nanocomposites—experimental investigation , 2003 .

[95]  J. King,et al.  Development of an additive equation for predicting the electrical conductivity of carbon‐filled composites , 2003 .

[96]  Hui-Ming Cheng,et al.  Mechanical and electrical properties of a MWNT/epoxy composite , 2002 .

[97]  S. M. Berezina,et al.  The effect of morphology of ternary-phase polypropylene/glass bead/ethylene-propylene rubber composites on the toughness and brittle-ductile transition , 2002 .

[98]  Xiao-hui Liu,et al.  FT-IR spectroscopic study of hydrogen bonding in PA6/clay nanocomposites , 2002 .

[99]  M. Hussain,et al.  Fabrication process and electrical behavior of novel pressure-sensitive composites , 2001 .

[100]  P. Wambua,et al.  Natural fibres: can they replace glass in fibre reinforced plastics? , 2001 .

[101]  D. M. Lincoln,et al.  Secondary structure and elevated temperature crystallite morphology of nylon-6/layered silicate nanocomposites , 2001 .

[102]  R. Vaia,et al.  Polymer/layered silicate nanocomposites as high performance ablative materials , 1999 .

[103]  J. Liang,et al.  Morphology and tensile properties of glass bead filled low density polyethylene composites , 1998 .

[104]  John Morton,et al.  The impact resistance of composite materials — a review , 1991 .

[105]  A. Radlinski,et al.  Universal high performance ball-milling device and its application for mechanical alloying , 1991 .

[106]  G. P. Tandon,et al.  The effect of aspect ratio of inclusions on the elastic properties of unidirectionally aligned composites , 1984 .

[107]  Robert J. Young,et al.  Crack propagation in a glass particle-filled epoxy resin , 1984 .

[108]  C. Li,et al.  Composite Materials (I) , 1975 .

[109]  A. Pudełko,et al.  Waste derived biochar as an alternative filler in biocomposites - Mechanical, thermal and morphological properties of biochar added biocomposites , 2021 .

[110]  N. M. Julkapli,et al.  Dimensional stability of natural fiber-based and hybrid composites , 2019, Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites.

[111]  R. Das,et al.  Polymer nanocomposites for sensor devices , 2018 .

[112]  M. Misra,et al.  SUSTAINABLE LIGHTWEIGHT BIOCOMPOSITES FROM TOUGHENED POLYPROPYLENE AND BIOCARBON FOR AUTOMOTIVE APPLICATIONS , 2017 .

[113]  A. Malas.  Rubber nanocomposites with graphene as the nanofiller , 2017 .

[114]  Rashmi Walvekar,et al.  EFFECT OF OIL PALM EFB-BIOCHAR ON PROPERTIES OF PP/EVA COMPOSITES , 2017 .

[115]  undefined Ibi.  Standardized Product Definition and Product Testing Guidelines for Biochar That Is Used in Soil , 2015 .

[116]  小林 四郎,et al.  Encyclopedia of Polymeric Nanomaterials , 2015 .

[117]  Mario Miscuglio,et al.  ANALYSIS OF MICROWAVE ABSORBING PROPERTIES OF EPOXY MWCNT COMPOSITES , 2014 .

[118]  Jaeyoung Jang,et al.  Poly(3-hexylthiophene) wrapped carbon nanotube/poly(dimethylsiloxane) composites for use in finger-sensing piezoresistive pressure sensors , 2011 .

[119]  Greenhouse Gas Emissions from a Typical Passenger Vehicle , 2011 .

[120]  S. Sohi,et al.  A review of biochar and its use and function in soil , 2010 .

[121]  Harry Marsh,et al.  CHAPTER 2 – Activated Carbon (Origins) , 2006 .

[122]  P. Bronsveld,et al.  Microstructure of wood charcoal prepared by flash heating , 2003 .

[123]  T. Courtney,et al.  The physics of mechanical alloying: A first report , 1990 .