Inductive ultra-wide band detection and location of partial discharges

In medium- and high-voltage cables with a helical structure of the earth screen current pulses from partial discharges travelling along the cable are observed to follow the spiralling structure. The resulting tangential current produces an axial magnetic field which can be detected by an inductive sensor without having to make any change to the cable. A specially developed inductive sensor placed around the outer sheath of an intact cable is made selectively sensitive to the high-frequency signals (± 100 MHz) arising from the partial discharges. The discharge pulses are recorded by a fast digitizer (bandwidth of 600 MHz). In laboratory experiments partial discharges with a minimum magnitude of about 5 pCfrom electrical treeing in short, medium-voltage cables could be detected. Location by means of transit time measurements was performed with an accuracy of about 5 cm. In one case, the polarity of the discharge signal was successfully used to locate the discharge to within 1 cm.