A Framework for Quantifying Measurement Uncertainties and Uncertainty Propagation in HCCI/LTGC Engine Experiments

[1]  Sebastian Mosbach,et al.  Influence of Injection Timing and Piston Bowl Geometry on PCCI Combustion and Emissions , 2009 .

[2]  Blake A. Simmons,et al.  Characteristics of Isopentanol as a Fuel for HCCI Engines , 2010 .

[3]  John E. Dec,et al.  An Investigation of the Relationship Between Measured Intake Temperature, BDC Temperature, and Combustion Phasing for Premixed and DI HCCI Engines , 2004 .

[4]  F. Jiménez-Espadafor,et al.  Effect of Turbulence and External Exhaust Gas Recirculation on HCCI Combustion Mode and Exhaust Emissions , 2009 .

[5]  Hans-Erik Ångström,et al.  GDI HCCI: Effects of Injection Timing and Air Swirl on Fuel Stratification, Combustion and Emissions Formation , 2002 .

[6]  W. L. Brown.  Methods for Evaluating Requirements and Errors in Cylinder Pressure Measurement , 1967 .

[7]  John E. Dec,et al.  Boosted HCCI - Controlling Pressure-Rise Rates for Performance Improvements using Partial Fuel Stratification with Conventional Gasoline , 2011 .

[8]  Joseph G. Voelkel,et al.  Guide to Quality Control , 1982 .

[9]  William J. Pitz,et al.  An Approach for Formulating Surrogates for Gasoline with Application toward a Reduced Surrogate Mechanism for CFD Engine Modeling , 2011 .

[10]  Mani Sarathy,et al.  Detailed Kinetic Modeling of Conventional Gasoline at Highly Boosted Conditions and the Associated Intermediate Temperature Heat Release , 2012 .

[11]  Benjamín Pla,et al.  A methodology to identify the intake charge cylinder-to-cylinder distribution in turbocharged direct injection Diesel engines , 2008 .

[12]  William J. Pitz,et al.  Understanding the Chemical Effects of Increased Boost Pressure under HCCI Conditions , 2008 .

[13]  Alberto Broatch,et al.  New methodology for in-cylinder pressure analysis in direct injection diesel engines—application to combustion noise , 2005 .

[14]  Bruce G. Bunting,et al.  Cetane Number and Engine Speed Effects on Diesel HCCI Performance and Emissions , 2005 .

[15]  Zhang Chun-hua,et al.  Effects of Intake Temperature and Excessive Air Coefficient on Combustion Characteristics and Emissions of HCCI Combustion , 2011 .

[16]  F Levassort,et al.  Modeling of piezoelectric transducers with combined pseudospectral and finite-difference methods. , 2008, The Journal of the Acoustical Society of America.

[17]  Jaime Martín,et al.  Digital signal processing of in-cylinder pressure for combustion diagnosis of internal combustion engines , 2010 .

[18]  J. Eng,et al.  Characterization of Pressure Waves in HCCI Combustion , 2002 .

[19]  G. Amba Prasad Rao,et al.  Homogeneous Charge Compression Ignition (HCCI) Engines: A Review , 2016 .

[20]  William Cannella,et al.  Partial Fuel Stratification to Control HCCI Heat Release Rates: Fuel Composition and Other Factors Affecting Pre-Ignition Reactions of Two-Stage Ignition Fuels , 2011 .

[21]  K. Chung,et al.  Estimation of the measurement uncertainty by the bottom-up approach for the determination of methamphetamine and amphetamine in urine. , 2010, Journal of analytical toxicology.

[22]  Francisco Espinosa-Loza,et al.  Modeling Iso-octane HCCI using CFD with Multi-Zone Detailed Chemistry; Comparison to Detailed Speciation Data over a Range of Lean Equivalence Ratios , 2008 .

[23]  Salvador M. Aceves,et al.  Compression Ratio Effect on Methane HCCI Combustion , 1998 .

[24]  J. Schramm,et al.  A study on the effects of compression ratio, engine speed and equivalence ratio on HCCI combustion of DME , 2007 .

[25]  Yun Li,et al.  Homogeneous Charge Compression Ignition engine: A technical review , 2011, The 17th International Conference on Automation and Computing.

[26]  John E. Dec,et al.  Characterizing the Development of Thermal Stratification in an HCCI Engine Using Planar-Imaging Thermometry , 2009 .

[27]  Myoungho Sunwoo,et al.  A study on pegging methods for noisy cylinder pressure signal , 2008 .

[28]  Chunhua Zhang,et al.  Experimental study of the influence of λ and intake temperature on combustion characteristics in an HCCI engine fueled with n-heptane , 2014 .

[29]  R. H. Thring,et al.  Homogeneous-Charge Compression-Ignition (HCCI) Engines , 1989 .

[30]  Bengt Johansson,et al.  The Effect of Intake Temperature on HCCI Operation Using Negative Valve Overlap , 2004 .

[31]  Ciro Spataro.  ADC Based Measurements:a Common Basis for the Uncertainty Estimation , 2010 .

[32]  Aiyagari Ramesh,et al.  Effects of charge temperature and exhaust gas re-circulation on combustion and emission characteristics of an acetylene fuelled HCCI engine , 2010 .

[33]  John E. Dec,et al.  Boosted HCCI for high power without engine knock and with ultra-low NOx emissions - Using conventional gasoline , 2010 .

[34]  John E. Dec,et al.  Effects of gasoline reactivity and ethanol content on boosted premixed and partially stratified low-temperature gasoline combustion (LTGC) , 2015 .

[35]  Michael F. J. Brunt,et al.  Quantification and reduction of IMEP errors resulting from pressure transducer thermal shock in an S.I. engine , 1999 .

[36]  S. Khalilarya,et al.  Simultaneously Reduction of NOx and Soot Emissions in a DI Heavy Duty diesel Engine Operating at High Cooled EGR Rates , 2011 .

[37]  Fabrice Foucher,et al.  Effect of EGR Chemical Components and Intake Temperature on HCCI Combustion Development , 2006 .

[38]  Wallace L. Chippior,et al.  Influence of Engine Speed on HCCI Combustion Characteristics using Dual-Stage Autoignition Fuels , 2009 .

[39]  Carlos Guardiola,et al.  Injection diagnosis through common-rail pressure measurement , 2006 .

[40]  A. M. Leman,et al.  Effects of Intake Temperature and Equivalence Ratio on HCCI Ignition Timing and Emissions of a 2-Stroke Engine , 2013 .

[41]  Andrew L. Randolph,et al.  Methods of Processing Cylinder-Pressure Transducer Signals to Maximize Data Accuracy , 1990 .