Numerical Simulation Of Electrokinetic Flow In Microfluidic Chips.

Microfluidic chips are miniaturized analytical devices used in chemical, biological and medical applications. In most cases, fluids are conducted through microchannels by applying electric potentials and/or pressure gradients. This growing lab-on-a-chip technology requires numerical simulations to assist the design, control and optimization of analytical manipulations. The present work deals with FEM-based calculations of the dynamics of electrolyte solutions in cross-shaped microchannels, where the flow is driven by the action of external electric fields. A theoretical modeling of electrokinetic and transport phenomena in the system is carried out in the framework of continuum fluid mechanics. Calculations ground on conservation equations of mass, momentum and electrical charge, considering effects in three dimensions. Operations normally performed in analytical systems are discussed, such as loading, focusing, and injection of samples. Numerical simulations carried out in this work can be a valuable tool to control and optimize practical manipulations in microfluidic chips.

[1]  J. M. MacInnes,et al.  Computation of reacting electrokinetic flow in microchannel geometries , 2002 .

[2]  S. Jacobson,et al.  Computer simulations of electrokinetic injection techniques in microfluidic devices , 2000, Analytical chemistry.

[3]  S. Jacobson,et al.  Computer simulations of electrokinetic transport in microfabricated channel structures. , 1998, Analytical chemistry.

[4]  R. Allen,et al.  Prediction of electrokinetic and pressure flow in a microchannel T-junction , 2003 .

[5]  M. Madou.  Fundamentals of microfabrication : the science of miniaturization , 2002 .

[6]  Darwin R. Reyes,et al.  Micro total analysis systems. 1. Introduction, theory, and technology. , 2002, Analytical chemistry.

[7]  Lung-Ming Fu,et al.  Variable‐volume‐injection methods using electrokinetic focusing on microfluidic chips , 2002 .

[8]  H. Girault,et al.  Finite element simulation of an electroosmotic-driven flow division at a T-junction of microscale dimensions , 2000, Analytical chemistry.

[9]  D. Erickson,et al.  Integrated microfluidic devices , 2004 .

[10]  Howard H. Hu,et al.  Numerical simulation of electroosmotic flow. , 1998, Analytical chemistry.

[11]  Lung-Ming Fu,et al.  Electrokinetic focusing injection methods on microfluidic devices. , 2003, Analytical chemistry.

[12]  N. Sundararajan,et al.  Three-dimensional hydrodynamic focusing in polydimethylsiloxane (PDMS) microchannels , 2004, Journal of Microelectromechanical Systems.

[13]  Jr-Lung Lin,et al.  Numerical simulation of electrokinetic focusing in microfluidic chips , 2002 .

[14]  Howard A. Stone,et al.  ENGINEERING FLOWS IN SMALL DEVICES , 2004 .