Vibration analysis of a multi-layer beam containing magnetorheological fluid

Magnetorheological (MR) materials exhibit rapid variations in their rheological properties when subjected to varying magnetic field and thus offer superior potential for applications in smart structures requiring high bandwidth. MR sandwich structures can apply distributed control force to yield variations in stiffness and damping properties of the structure in response to the intensity of the applied magnetic field and could thus provide vibration suppression over a broad range of external excitation frequencies. This study investigates the properties of a multi-layered beam with MR fluid as a sandwich layer between the two layers of the continuous elastic structure. The governing equations of a multi-layer MR beam are formulated in the finite element form and using the Ritz method. A free oscillation experiment is performed to estimate the relationship between the magnetic field and the complex shear modulus of the MR materials in the pre-yield regime. The validity of the finite element and Ritz formulations developed is examined by comparing the results from the two models with those from the experimental investigation. Various parametric studies have been performed in terms of variations of the natural frequencies and loss factor as functions of the applied magnetic field and thickness of the MR fluid layer for various boundary conditions. The forced vibration responses of the MR sandwich beam are also evaluated under harmonic force excitation. The results illustrate that the natural frequencies could be increased by increasing the magnetic field while the magnitudes of the peak deflections could be considerably decreased, which demonstrates the vibration suppression capability of the MR sandwich beam.

[1]  Seung-Bok Choi,et al.  A New Generation of Innovative Ultra-Advanced Intelligent Composite Materials Featuring Electro-Rheological Fluids: An Experimental Investigation , 1989 .

[2]  H. Conrad,et al.  Vibration Characteristics of a Composite Beam Containing an Electrorheological Fluid , 1990 .

[3]  Kartik Venkatraman,et al.  Vibration control of sandwich beams using electro-rheological fluids , 2003 .

[4]  D. J. Mead,et al.  The forced vibration of a three-layer, damped sandwich beam with arbitrary boundary conditions , 1969 .

[5]  Kosuke Nagaya,et al.  Vibration suppression of plate using linear MR fluid passive damper , 2004 .

[6]  Ling Zhang,et al.  An adaptive beam model and dynamic characteristics of magnetorheological materials , 2003 .

[7]  Hyun-Ung Oh,et al.  An experimental study of a semiactive magneto-rheological fluid variable damper for vibration suppression of truss structures , 2002 .

[8]  Y. Choi,et al.  Response of Electrorheological Fluid-Filled Laminate Composites to Forced Vibration , 1992 .

[9]  J. David Carlson,et al.  A growing attraction to magnetic fluids , 1994 .

[10]  John P. Coulter,et al.  Analytical Modeling of Electrorheological Material Based Adaptive Beams , 1995 .

[11]  J. L. Sproston,et al.  Applications of electro-rheological fluids in vibration control: a survey , 1996 .

[12]  Melek Yalcintas,et al.  Vibration suppression capabilities of magnetorheological materials based adaptive structures , 2004 .

[13]  Y. Shih,et al.  Dynamic Characteristics and Dynamic Instability of Magnetorheological Material-based Adaptive Beams , 2006 .

[14]  Weihua Li,et al.  Viscoelastic properties of MR fluids , 1999 .

[15]  Robert L. Clark,et al.  Experiments on Active Control of Plate Vibration Using Piezoelectric Actuators and Polyvinylidene Fluoride (PVDF) Modal Sensors , 1994 .

[16]  Seung-Bok Choi,et al.  Constitutive models of electrorheological and magnetorheological fluids using viscometers , 2005 .

[17]  J. Tani,et al.  Damping Effect of Multi-Layer Beams with Embedded Electro-Rheological Fluid , 1999 .

[18]  K. Liew,et al.  Active control of FGM plates with integrated piezoelectric sensors and actuators , 2001 .

[19]  Melek Yalcintas,et al.  Magnetorheological and electrorheological materials in adaptive structures and their performance comparison , 1999 .

[20]  Shirley J. Dyke,et al.  An experimental study of MR dampers for seismic protection , 1998 .

[21]  John P. Coulter,et al.  An Adaptive Beam Model with Electrorheological Material Based Applications , 1995 .

[22]  Seung-Bok Choi.  Vibration Control of a Flexible Structure Using ER Dampers , 1999 .

[23]  J Wang,et al.  Magnetorheological fluid devices: Principles, characteristics and applications in mechanical engineering , 2001 .

[24]  Christopher D. Rahn,et al.  Modeling and Control of an Electrorheological Sandwich Beam , 1998 .

[25]  John P. Coulter,et al.  Electrorheological material based non-homogeneous adaptive beams , 1998 .

[26]  Wl L. Qu,et al.  Seismic response control of frame structures using magnetorheological/electrorheological dampers , 2000 .

[27]  G Chen,et al.  MR damper and its application for semi-active control of vehicle suspension system , 2002 .

[28]  Daniel J. Inman,et al.  Vibration Control through Passive Constrained Layer Damping and Active Control , 1997 .

[29]  J. Carlson,et al.  Viscoelastic Properties of Magneto- and Electro-Rheological Fluids , 1994 .

[30]  B. F. Spencer,et al.  STATE OF THE ART OF STRUCTURAL CONTROL , 2003 .

[31]  R. Ditaranto.  Theory of Vibratory Bending for Elastic and Viscoelastic Layered Finite-Length Beams , 1965 .