SU-8 Composite Based "Lube-tape" for a Wide Range of Tribological Applications

In a previous work, we have developed a perflouropolyether (PFPE) lubricant droplet-filled SU-8 composite which promotes bonding between the molecules of SU-8 and PFPE and provides excellent boundary lubrication. The SU-8 + PFPE composite has enhanced the wear durability of SU-8 by more than four orders of magnitude. In this work, the same SU-8 + PFPE composite was used to fabricate a stand-alone laminate film called “Lube-tape”. It has integrated two layers of approximately 90 microns thickness each; the top layer is made of SU-8 + PFPE composite and the bottom layer of pristine SU-8. Thus, a single tape can have drastically contrasting high friction and low friction properties on its two surfaces. The composite side has the initial coefficient of friction ~7 times lower and the wear life more than four orders of magnitude than those of the pristine SU-8 side. This lube tape can be used on any load bearing surface to improve the tribological performance by simply pasting the pristine SU-8 side onto the substrate.

[1]  S. Sinha,et al.  The frictional behavior of UHMWPE films with different surface energies at low normal loads , 2010 .

[2]  A. Boisen,et al.  Photochemical modification and patterning of SU-8 using anthraquinone photolinkers. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[3]  S. Sinha,et al.  Surface chemical modification for exceptional wear life of MEMS materials , 2011 .

[4]  P. Renaud,et al.  Effect of filler behavior on nanocomposite SU8 photoresist for moving micro-parts , 2006 .

[5]  George I. Loeb,et al.  Modern approaches to wettability : theory and applications , 1992 .

[6]  S. Sinha,et al.  Self-lubricating SU-8 Nanocomposites for Microelectromechanical Systems Applications , 2012, Tribology Letters.

[7]  B. Bhushan,et al.  Nanoscale Boundary Lubrication Studies , 2004 .

[8]  S. Sinha,et al.  Wear durability study on self-lubricating SU-8 composites with perfluoropolyther, multiply-alkylated cyclopentane and base oil as the fillers , 2013 .

[9]  Nam-Trung Nguyen,et al.  SU‐8 as a structural material for labs‐on‐chips and microelectromechanical systems , 2007, Electrophoresis.

[10]  Chi Ming Chan,et al.  Polymer surface modification and characterization , 1993 .

[11]  Mark Bachman,et al.  Simple photografting method to chemically modify and micropattern the surface of SU-8 photoresist. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[12]  J. Pascault,et al.  Post‐Crosslinkable Blends: Reactions Between a Linear Poly(hydroxyl‐amino ether) and a Diepoxy , 2004 .

[13]  H. Kakiuchi,et al.  Study of epoxy compounds. Part VI. Curing reactions of epoxy resin and acid anhydride with amine, acid, alcohol, and phenol as catalysts , 1964 .

[14]  S. Sinha,et al.  Tribo-functionalizing Si and SU8 materials by surface modification for application in MEMS/NEMS actuator-based devices , 2011 .