Multicrystalline silicon solar cells with porous silicon emitter

Abstract A review of the application of porous silicon (PS) in multicrystalline silicon solar cell processes is given. The different PS formation processes, structural and optical properties of PS are discussed from the viewpoint of photovoltaics. Special attention is given to the use of PS as an antireflection coating in simplified processing schemes and for simple selective emitter processes as well as to its light trapping and surface passivating capabilities. The optimization of a PS selective emitter formation results in a 14.1% efficiency mc-Si cell processed without texturization, surface passivation or additional ARC deposition. The implementation of a PS selective emitter into an industrially compatible screenprinted solar cell process is made by both the chemical and electrochemical method of PS formation. Different kinds of multicrystalline silicon materials and solar cell processes are used. An efficiency of 13.2% is achieved on a 25 cm 2 mc-Si solar cell using the electrochemical technique while the efficiencies in between 12% and 13% are reached for very large (100–164 cm 2 ) commercial mc-Si cells with a PS emitter formed by chemical method.

[1]  Mark E. Orazem,et al.  On the Application of the Kramers‐Kronig Relations to Evaluate the Consistency of Electrochemical Impedance Data , 1991 .

[2]  D. R. Turner.  Electropolishing Silicon in Hydrofluoric Acid Solutions , 1958 .

[3]  C. Lévy‐Clément,et al.  Formation and characterization of porous silicon layers for application in multicrystalline silicon solar cells , 1999 .

[4]  N. M. Kalkhoran,et al.  High performance porous silicon solar cell development , 1994, Proceedings of 1994 IEEE 1st World Conference on Photovoltaic Energy Conversion - WCPEC (A Joint Conference of PVSC, PVSEC and PSEC).

[5]  K. Grigoras,et al.  The porous silicon emitter concept applied to multicrystalline silicon solar cells , 1997 .

[6]  G. C. Jain,et al.  Porous Silicon Oxide Anti‐Reflection Coating for Solar Cells , 1982 .

[7]  István Bársony,et al.  Efficiency improvement by porous silicon coating of multicrystalline solar cells , 1997 .

[8]  D. Kwong,et al.  Developments in Luminescent Porous Si , 1993 .

[9]  R. J. Archer.  Stain films on silicon , 1960 .

[10]  Leigh T. Canham,et al.  Properties of Porous Silicon , 1998 .

[11]  D. Kwong,et al.  Photoluminescence and formation mechanism of chemically etched silicon , 1992 .

[12]  R. Tenne,et al.  Efficiency and Stability Enhancement of n‐Si Photoelectrodes in Aqueous Solution , 1991 .

[13]  On the morphology of stain-etched porous silicon films , 1998 .

[14]  H. Bender,et al.  Porous silicon in crystalline silicon solar cells: a review and the effect on the internal quantum efficiency , 1998 .

[15]  G. Smestad,et al.  Photovoltaic response in electrochemically prepared photoluminescent porous silicon , 1992 .

[16]  Johan Nijs,et al.  Simple integral screenprinting process for selective emitter polycrystalline silicon solar cells , 1991 .

[17]  Wei Guang-pu,et al.  Porous silicon and its application test for photovoltaic devices , 1994 .

[18]  G. Di Francia,et al.  Porous silicon in solar cells: A review and a description of its application as an AR coating , 1995 .

[19]  H. Bender,et al.  Morphological properties of porous-Si layers for n+-emitter applications , 1999 .