High-voltage electrode position: a key factor of electrostatic separation efficiency

Industry application of electrostatic separation technologies still faces a major difficulty: good results can be obtained only by adequate control of a multitude of operating parameters. The aim of the present paper is to analyze a key factor of electrostatic separation efficiency: the position of the high-voltage electrodes. Experiments were performed with two types of granular materials: chopped electric wire wastes and foundry sands. The electrostatic separator employed for the tests was provided with a needle-type corona electrode, associated - in some experiments - with a tabular-type electrostatic electrode, at various angular and radial positions, with respect with a rotating roll electrode connected to the ground. The experimental data are discussed in relation with the results of the numerical analysis of the electric field, carried out with a charge simulation program. They show that the outcome of the separation process (i.e. the weight percentage of the conductor and non-conductor fractions, as well as the purity of the recovered materials) depend on the configuration of the electrode system. The position of the electrodes affects both the particles charging conditions on the surface of the roll electrode, and the trajectories of the charged particles in the high intensity electric field of the separator. Some recommendations could be formulated for the industrial application of the electrostatic separation technology.

[1]  L. Dascalescu,et al.  Charging of particulates in the corona field of roll-type electroseparators , 1994 .

[2]  Lucian Dascalescu,et al.  Modelling of conductive particle behaviour in insulating fluids affected by DC electric fields , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[3]  Lucian Dascalescu,et al.  Numerical analysis of the electric field of roll-type electrostatic separators , 1993 .

[4]  Jacob Leidner,et al.  Plastics Waste: Recovery of Economic Value , 1981 .

[5]  A. Iuga,et al.  Electrostatic separation of metals and plastics from granular industrial wastes , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[6]  O. C. Ralston,et al.  Electrostatic separation of mixed granular solids , 1961 .

[7]  L. Dascalescu,et al.  Optimization of electrostatic separation Processes using response surface modeling , 2004, IEEE Transactions on Industry Applications.

[8]  Thomas D. Sandry,et al.  Practical Guide to Experimental Design , 1996, Technometrics.

[9]  James E. Lawver.  State of the Art of Electrostatic Separation of Minerals , 1969 .

[10]  Lucian Dascalescu,et al.  Charges and forces on conductive particles in roll-type corona-electrostatic separators , 1993 .

[11]  Lucian Dascalescu,et al.  ELECTROSTATIC SEPARATION OF INSULATING AND CONDUCTIVE PARTICLES FROM GRANULAR MIXES , 1998 .

[12]  Lucian Dascalescu.  Mouvements des particules conductrices dans un séparateur à haute tension pour matériaux granulaires , 1994 .

[13]  Rob Morrison,et al.  Development of electrostatic separation models for the mineral sands industry , 1991 .

[14]  Ion I. Inculet,et al.  Electrostatic Mineral Separation , 1984 .

[15]  P. L. Levin,et al.  A unified boundary-element finite-element package , 1993 .

[16]  Lucian Dascalescu,et al.  Factors which influence the insulation-metal electroseparation , 1993 .

[17]  Lucian Dascalescu,et al.  Modeling of Conductive Particle Behavior in Insulating Fluids Affected by , 1998 .

[18]  C. Ireland.  Fundamental concepts in the design of experiments , 1964 .

[19]  Leonie Kohl,et al.  Fundamental Concepts in the Design of Experiments , 2000 .

[20]  Ion I. Inculet,et al.  ELECTROSTATIC SEPARATION OF PLASTICS FOR RECYCLING , 1998 .

[21]  Y. Higashiyama,et al.  RECENT PROGRESS IN ELECTROSTATIC SEPARATION TECHNOLOGY , 1998 .

[22]  A. Iuga,et al.  Computer-assisted experimental design for the optimization of electrostatic separation processes , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[23]  Lucas Reijnders,et al.  A normative strategy for sustainable resource choice and recycling , 2000 .