Using the DEM-CFD method to predict Brownian particle deposition in a constricted tube

Modelling of the agglomeration and deposition on a constricted tube collector of colloidal size particles immersed in a liquid is investigated using the discrete element method (DEM). The ability of this method to represent surface interactions allows the simulation of agglomeration and deposition at the particle scale. The numerical model adopts a mechanistic approach to represent the forces involved in colloidal suspensions by including near-wall drag retardation, surface interaction and Brownian forces. The model is implemented using the commercially available DEM package EDEM 2.3®, so that results can be replicated in a standard and user-friendly framework. The effects of various particle-to-collector size ratios, inlet fluid flow-rates and particle concentrations are examined and it is found that deposition efficiency is strongly dependent on the inter-relation of these parameters. Particle deposition and re-suspension mechanisms have been identified and analyzed thanks to EDEM's post processing capability. One-way coupling with computational fluid dynamics (CFD) is considered and results are compared with a two-way coupling between EDEM 2.3® and FLUENT 12.1®. It is found that two-way coupling requires circa 500% more time than one-way coupling for similar results.

[1]  You-Im Chang,et al.  Prediction of Brownian particle deposition in porous media using the constricted tube model. , 2003, Journal of colloid and interface science.

[2]  W. Johnson,et al.  Direct observations of colloid retention in granular media in the presence of energy barriers, and implications for inferred mechanisms from indirect observations. , 2010, Water research.

[3]  G. Evans,et al.  Exact and approximate expressions for resistance coefficients of a colloidal sphere approaching a solid surface at intermediate Reynolds numbers , 2007 .

[4]  J. Gregory,et al.  Approximate expressions for retarded van der waals interaction , 1981 .

[5]  Ove Stephansson,et al.  Discrete Element Methods for Granular Materials , 2007 .

[6]  P. A. Cundall,et al.  FORMULATION OF A THREE-DIMENSIONAL DISTINCT ELEMENT MODEL - PART I. A SCHEME TO DETECT AND REPRESENT CONTACTS IN A SYSTEM COMPOSED OF MANY POLYHEDRAL BLOCKS , 1988 .

[7]  Shuiqing Li,et al.  Discrete element simulation of micro-particle deposition on a cylindrical fiber in an array , 2007 .

[8]  S. Ookawara,et al.  Quasi-direct numerical simulation of lift force-induced particle separation in a curved microchannel by use of a macroscopic particle model , 2007 .

[9]  Jam Hans Kuipers,et al.  Numerical and experimental investigation of the lift force on single bubbles , 2010 .

[10]  R. G. Cox,et al.  Slow viscous motion of a sphere parallel to a plane wall , 1967 .

[11]  V. Naumov Influence of Saffman's lift force on the motion of a particle in a Couette layer , 1995 .

[12]  Zhengbiao Peng,et al.  DEM simulation of aggregation of suspended nanoparticles , 2010 .

[13]  E. Verwey,et al.  Theory of the stability of lyophobic colloids. , 1955, The Journal of physical and colloid chemistry.

[14]  Vicki Chen,et al.  Simulation of protein ultrafiltration using CFD: Comparison of concentration polarisation and fouling effects with filtration and protein adsorption experiments , 2009 .

[15]  S. Bhattacharjee,et al.  DLVO interaction between rough surfaces , 1998 .

[16]  François Feuillebois,et al.  Analytical solutions for a spherical particle near a wall in axisymmetrical polynomial creeping flows , 2005 .

[17]  R. G. Cox,et al.  Slow viscous motion of a sphere parallel to a plane wall—I Motion through a quiescent fluid , 1967 .

[18]  Goodarz Ahmadi,et al.  Brownian diffusion of submicrometer particles in the viscous sublayer , 1991 .

[19]  T. Champlin Using circulation tests to model natural organic matter adsorption and particle deposition by spiral-wound nanofiltration membrane elements , 2000 .

[20]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[21]  S. Assemi,et al.  Deposition and re-entrainment dynamics of microbes and non-biological colloids during non-perturbed transport in porous media in the presence of an energy barrier to deposition , 2007 .

[22]  Zhen Luo,et al.  A study on particle deposition morphology within a constricted tube in the presence and absence of the detachment mechanism , 2008 .

[23]  Julien Pedel,et al.  Hemispheres-in-cell geometry to predict colloid deposition in porous media. , 2009, Environmental science & technology.

[24]  Chi Tien,et al.  Trajectory analysis of deep‐bed filtration with the sphere‐in‐cell porous media model , 1976 .

[25]  A. Yu,et al.  Discrete particle simulation of particulate systems: Theoretical developments , 2007 .

[26]  Siegfried Ripperger,et al.  Particle deposition and layer formation at the crossflow microfiltration , 1997 .

[27]  Jeffrey S. Marshall,et al.  Particle aggregation and capture by walls in a particulate aerosol channel flow , 2007 .

[28]  J. A. V. BUTLER,et al.  Theory of the Stability of Lyophobic Colloids , 1948, Nature.

[29]  Arthur T. Andrews,et al.  Multiscale modeling of gas-fluidized beds , 2006 .

[30]  C. Tien,et al.  Analysis of Brownian particle deposition and reentrainment in granular beds , 1986 .

[31]  Yutaka Tsuji,et al.  Numerical simulation of two-dimensional fluidized beds using the discrete element method (comparison between the two- and three-dimensional models) , 1998 .

[32]  William P. Johnson,et al.  Colloid retention in porous media: mechanistic confirmation of wedging and retention in zones of flow stagnation. , 2007, Environmental science & technology.

[33]  H. Brenner The slow motion of a sphere through a viscous fluid towards a plane surface , 1961 .

[34]  J. Favier,et al.  Model for the deformation in agricultural and food particulate materials under bulk compressive loading using discrete element method. I: Theory, model development and validation , 2004 .

[35]  Paul W. Cleary,et al.  DEM modelling of industrial granular flows: 3D case studies and the effect of particle shape on hopper discharge , 2002 .