Continuous-time state-space unsteady aerodynamic modeling based on boundary element method

Abstract In this paper a continuous-time state-space aerodynamic model is developed based on the boundary element method. Boundary integral equations governing the unsteady potential flow around lifting bodies are presented and modified for thin wing configurations. Next, the BEM discretized problem of unsteady flow around flat wing equivalent to the original geometry is recast into the standard form of a continuous-time state-space model considering some auxiliary assumptions. The system inputs are time derivative of the instantaneous effective angle of attack and thickness/camber correction terms while the outputs are unsteady aerodynamic coefficients. To validate the model, its predictions for aerodynamic coefficients variations due to the various unsteady motions about different wing geometries are compared to the results of the direct BEM computations and verified numerical and theoretical solutions. This comparison indicates a good agreement. Since the resulting aerodynamic model is in the continuous-time domain, it is particularly useful for optimization and nonlinear analysis purposes. Moreover, its state-space representation is the appropriate form for an aerodynamic model in design or control applications.

[1]  A boundary element method for the aerodynamic analysis of aircraft in arbitrary motions , 2003 .

[2]  David M. Schuster,et al.  Computational Aeroelasticity: Success, Progress, Challenge , 2003 .

[3]  Massimo Gennaretti,et al.  Aerodynamics and aeroacoustics of wings and rotors via BEM - unsteady, transonic, and viscous effects , 1998 .

[4]  A. S. Nobari,et al.  An efficient reduced-order modelling approach based on fluid eigenmodes and boundary element method , 2007 .

[5]  A. S. Nobari,et al.  Aeroelastic analysis of helicopter rotor blade in hover using an efficient reduced-order aerodynamic model , 2009 .

[6]  H. Matthies,et al.  State-space representation of instationary two-dimensional airfoil aerodynamics , 2004 .

[7]  Herbert Wagner.  Über die Entstehung des dynamischen Auftriebes von Tragflügeln , 1925 .

[8]  David Eller,et al.  An efficient aerodynamic boundary element method for aeroelastic simulations and its experimental validation , 2003 .

[9]  R. T. Jones.  The unsteady lift of a wing of finite aspect ratio , 1940 .

[10]  P. Dabnichki,et al.  Influence of the wake model on the thrust of oscillating foil , 2011 .

[11]  R. D. Firouz-Abadi,et al.  Reduced order modeling of liquid sloshing in 3D tanks using boundary element method , 2009 .

[12]  Peter Dabnichki,et al.  Unsteady panel method for flapping foil , 2009 .

[13]  H Murty,et al.  Aeroelastic stability analysis of an airfoil with structural nonlinearities using a state space unsteady aerodynamics model , 1995 .

[14]  W. Silva,et al.  Identification of Nonlinear Aeroelastic Systems Based on the Volterra Theory: Progress and Opportunities , 2005 .

[15]  Peter Dabnichki,et al.  Effect of the wing shape on the thrust of flapping wing , 2011 .

[16]  Haiyan Hu,et al.  Aeroelastic analysis of a non-linear airfoil based on unsteady vortex lattice model , 2004 .

[17]  H. Ashley,et al.  Unsteady aerodynamic modeling for arbitrary motions , 1977 .

[18]  Vahid Esfahanian,et al.  Unsteady supersonic aerodynamics based on BEM, including thickness effects in aeroelastic analysis , 2004 .

[19]  Vahid Esfahanian,et al.  Reduced-Order Modeling of Unsteady Flows About Complex Configurations Using the Boundary Element Method , 2002 .

[20]  F. Liu,et al.  Optimization of Unstalled Pitching and Plunging Motion of an Airfoil , 2006 .

[21]  Max F. Platzer,et al.  Analysis of Low-Speed Unsteady Airfoil Flows , 2005 .

[22]  L. Morino.  Toward a Unification of Potential and Viscous Aerodynamics: Boundary Integral Formulation , 1994 .

[23]  H. Madsen,et al.  Unsteady Airfoil Flows with Application to Aeroelastic Stability , 1999 .

[24]  J. Edwards.  Unsteady aerodynamic modeling for arbitrary motions , 1977 .