论文信息 - Preparation of Nano-Modified Polyacrylamide and Its Application on Solid-Liquid Separation in Waste Drilling Mud

Preparation of Nano-Modified Polyacrylamide and Its Application on Solid-Liquid Separation in Waste Drilling Mud

To satisfy the requirement on solid-liquid separation in high-density waste drilling mud, prepare the nano-modified polyacrylamide(PAM) flocculant for high density waste drilling mud by in-situ dispersion method, direct dispersion method and simultaneous formation method. The result showed the flocculent effect of nano-modified polyacrylamide prepared by simultaneous formation method was the best. When the content of water glass and acrylamide(AM) were respectively 3% and 15% , reaction temperature was 60?C and reaction time was 3h, the performance of product was the best. The water content in filter cake was 24.32% after the waste drilling mud disposed by the optimization flocculant. The flocculent effect of optimization flocculant was superior to that of other flocculant in market.

[1] Marie-Pierre Carignan,et al. Assessment of two thermally treated drill mud wastes for landfill containment applications , 2007, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[2] John A. Veil. Drilling waste management , 2002 .

[3] Long Yu,et al. Environment friendly fluid loss additives to protect the marine environment from the detrimental effect of mud additives , 2005 .

[4] S. Guigard,et al. Treatment of Oil-Based Drilling Waste Using Supercritical Carbon Dioxide , 2009 .

[5] Yang Ming. STUDY ON COMPREHENSIVE TREATMENT TECHNIQUE ABOUT WASTE DRILLING MUD , 2003 .

[6] Tahir Husain,et al. A fuzzy-based methodology for an aggregative environmental risk assessment: a case study of drilling waste , 2005, Environ. Model. Softw..