Investigation on helium ion beam lithography with proximity effect correction

Abstract. Our work presents and investigates the effectiveness of a model-based proximity effect correction method for helium ion beam lithography (HIBL). This method iteratively modulates the shape of a pattern by a feedback compensation mechanism until the simulated patterning fidelity satisfies specific constraints. A point spread function (PSF) is utilized to account for all phenomena involved during the scattering events of incident ion beam particles in the resist. Patterning prediction for subsequent correction process is derived from the energy intensity distribution due to convolution between the PSF and the pattern, with an adequate cut-off threshold. The performance of this method for HIBL is examined through several designed layouts from 15- to 5-nm in half pitches, under specific process parameters, including acceleration voltage, resist thickness, and resist sensitivity. Preliminary results show its effectiveness in improving the patterning fidelity of HIBL.

[1]  Soo-Young Lee,et al.  Dose, shape, and hybrid modifications for PYRAMID in electron beam proximity effect correction , 1997 .

[2]  Kuen-Yu Tsai,et al.  Fully model-based methodology for simultaneous correction of extreme ultraviolet mask shadowing and proximity effects , 2011 .

[3]  Chun-Hung Liu,et al.  New method of optimizing writing parameters in electron beam lithography systems for throughput improvement considering patterning fidelity constraints , 2012 .

[4]  C. W. Hagen,et al.  Resists for sub-20-nm electron beam lithography with a focus on HSQ: state of the art , 2009, Nanotechnology.

[5]  Kuen-Yu Tsai,et al.  Precision fabrication of EUVL programmed defects with helium ion beam patterning , 2021 .

[6]  K. Gonsalves,et al.  Resists for Helium Ion Beam Lithography: Recent Advances , 2020 .

[7]  Kuen-Yu Tsai,et al.  Design of automatic controllers for model-based OPC with optimal resist threshold determination for improving correction convergence , 2008, SPIE Advanced Lithography.

[8]  Brendan Griffin,et al.  A model of secondary electron imaging in the helium ion scanning microscope. , 2009, Ultramicroscopy.

[9]  Susumu Iida,et al.  Standard wafer with programed defects to evaluate the pattern inspection tools for 300-mm wafer fabrication for 7-nm node and beyond , 2019, Journal of Micro/Nanolithography, MEMS, and MOEMS.

[10]  Susumu Iida,et al.  Development of standard samples with programmed defects for evaluation of pattern inspection tools for 7-nm and smaller nodes , 2019 .

[11]  K. Berggren,et al.  Modeling the point-spread function in helium-ion lithography. , 2012, Scanning.

[12]  Kuen-Yu Tsai,et al.  Model-based proximity effect correction for helium ion beam lithography , 2018, Advanced Lithography.

[13]  Nicholas P. Economou,et al.  Helium ion microscope: A new tool for nanoscale microscopy and metrology , 2006 .

[14]  Fumio Murai,et al.  Application and evaluation of direct-write electron beam for ASICs , 1988 .

[15]  Wen‐Di Li,et al.  Helium-ion-beam nanofabrication: extreme processes and applications , 2020, International Journal of Extreme Manufacturing.

[16]  Edward A. Rietman,et al.  Using a neural network to proximity correct patterns written with a Cambridge electron beam microfabricator 10.5 lithography system , 1990 .

[17]  H. Stock,et al.  Model based hybrid proximity effect correction scheme combining dose modulation and shape adjustments , 2011 .

[18]  J. Ziegler,et al.  SRIM – The stopping and range of ions in matter (2010) , 2010 .

[19]  M. Parikh.  Corrections to proximity effects in electron beam lithography. I. Theory , 1979 .

[20]  Joel K. W. Yang,et al.  Scanning-helium-ion-beam lithography with hydrogen silsesquioxane resist , 2009 .

[21]  Philip C. W. Ng,et al.  Impacts of point spread function accuracy on patterning prediction and proximity effect correction in low-voltage electron-beam–direct-write lithography , 2013 .

[22]  H. Salemink,et al.  Sub-10-nm nanolithography with a scanning helium beam , 2009 .

[23]  Noel C. MacDonald,et al.  Fast proximity effect correction: An extension of PYRAMID for circuit patterns of arbitrary size , 1992 .

[24]  J. G. Hartley,et al.  Chrome on glass mask writing at 75 kV with the IBM EL4+electron-beam system , 1999 .

[25]  Nima Kalhor,et al.  Impact of pixel-dose optimization on pattern fidelity for helium ion beam lithography on EUV resist , 2015, Advanced Lithography.