Simulation, Design, and Validation of an UAV SOFC Propulsion System

A physically-based model for design and optimization of a fuel cell powered electric propulsion system for an unmanned aerial vehicle (UAV) is presented. Components of the system include a solid oxide fuel cell (SOFC) providing power, motor controller, brushless dc (BLDC) motor, and a propeller. Steady-state models for these components are integrated into a simulation program and solved numerically. This allows an operator to select constraints and explore design trade-offs between components, including fuel cell, controller, motor, and propeller options. We also present a graphical procedure using this model that allows rapid assessment and selection of design choices, including fuel cell characteristics and hybridization with multiple sources. A series of experiments conducted on an instrumented propulsion system in a low-speed wind tunnel were performed for comparison of individual component and full propulsion system performance with simulation model predictions. Data from these experiments are provided and are consistent with model predictions.

[1]  Hui Li,et al.  Maximum Fuel Economy-Oriented Power Management Design for a Fuel Cell Vehicle Using Battery and Ultracapacitor , 2010 .

[2]  Chivey Wu,et al.  Design of a Fuel Cell Powered UAV for Environmental Research , 2004 .

[3]  F.Z. Peng,et al.  Comparison of Traditional Inverters and $Z$ -Source Inverter for Fuel Cell Vehicles , 2004, IEEE Transactions on Power Electronics.

[4]  Dimitri N. Mavris,et al.  Development and experimental characterization of a fuel cell powered aircraft , 2007 .

[5]  Gui-Jia Su,et al.  An Interleaved Reduced-Component-Count Multivoltage Bus DC/DC Converter for Fuel Cell Powered Electric Vehicle Applications , 2008, IEEE Transactions on Industry Applications.

[6]  H. Akagi,et al.  An approach to position sensorless drive for brushless DC motors , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[7]  Caisheng Wang,et al.  A Physically Based Dynamic Model for Solid Oxide Fuel Cells , 2007, IEEE Transactions on Energy Conversion.

[8]  Hamid A. Toliyat,et al.  Handbook of Electric Motors , 2004 .

[9]  M.H. Nehrir,et al.  Comparison and Identification of Static Electrical Terminal Fuel Cell Models , 2007, IEEE Transactions on Energy Conversion.

[10]  T.G. Kirkland,et al.  Hydrocarbon-Air Fuel Cell Electrical Propulsion Systems , 1965, IEEE Transactions on Industrial Electronics and Control Instrumentation.

[11]  Ying Wu,et al.  Optimization of Fuel Cell and Supercapacitor for Fuel-Cell Electric Vehicles , 2006, IEEE Transactions on Vehicular Technology.

[12]  Hag-Wone Kim,et al.  Study on maximum torque generation for sensorless controlled brushless DC motor with trapezoidal back EMF , 2005 .

[13]  Dimitri N. Mavris,et al.  Design and Performance Validation of a Fuel Cell Unmanned Aerial Vehicle , 2006 .

[14]  Pragasen Pillay,et al.  Modeling, simulation, and analysis of permanent-magnet motor drives. II. The brushless DC motor drive , 1989 .

[15]  S. R. Shaw,et al.  A dynamic PEM fuel cell model , 2006, IEEE Transactions on Energy Conversion.

[16]  H. Y. Cho,et al.  A new power control strategy for hybrid fuel cell vehicles , 2004, Power Electronics in Transportation (IEEE Cat. No.04TH8756).

[17]  Dimitri N. Mavris,et al.  Flight Test Results for a Fuel Cell Unmanned Aerial Vehicle , 2007 .

[18]  Danielle Soban,et al.  Design of a UAV to Optimize Use of Fuel Cell Propulsion Technology , 2005 .

[19]  Jennifer Bauman,et al.  A Comparative Study of Fuel-Cell–Battery, Fuel-Cell–Ultracapacitor, and Fuel-Cell–Battery–Ultracapacitor Vehicles , 2008, IEEE Transactions on Vehicular Technology.

[20]  R. D. Mehta,et al.  Design rules for small low speed wind tunnels , 1979, The Aeronautical Journal (1968).

[21]  Barnes W. McCormick,et al.  Aerodynamics, Aeronautics and Flight Mechanics , 1979 .